HyperX Cloud Stinger 2 Core Gaming Headset
Quick Start Guide
Overview
This section provides an overview of the HyperX Cloud Stinger 2 Core Gaming Headset.
- A: Gaming headset
- B: PC splitter cable
- C: DTS Headphone:X instruction card
Diagram shows the HyperX Cloud Stinger 2 Core headset, a PC splitter cable, and a DTS Headphone:X instruction card.
Connecting to a PC or Notebook
To connect your headset to a PC or notebook:
Follow the instructions on the DTS Headphone:X instruction card to enable DTS Headphone:X.
Diagram illustrates connecting the headset via the PC splitter cable to a desktop computer (monitor and tower) and a laptop. Number 1 points to the PC connection, and number 2 indicates the laptop connection.
Connecting to Consoles and Mobile Devices
For Xbox Series X|S or PlayStation 5:
Diagram shows the headset connecting to Xbox Series X|S and PlayStation 5 controllers via dashed lines, indicating the connection path.
For Mobile Devices (Phone/Tablet):
Diagram shows the headset connecting to a tablet, smartphone, and another smartphone via dashed lines, indicating the connection path.
Features and Controls
Volume Wheel
Scroll up or down to adjust the volume level.
Swivel to Mute Microphone
Swivel the microphone upwards to mute it.
Diagram shows the volume wheel on the headset and an illustration of the microphone swiveling upwards to indicate the mute function.
Support and Troubleshooting
For questions or setup issues, contact the HyperX support team at: hyperx.gg/support
WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.
DTS, DTS:X, DTS Sound Unbound, Headphone:X, the DTS logo, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2020 DTS, Inc. ALL RIGHTS RESERVED.
Compliance and Legal Information
FCC Compliance and Advisory Statement: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
India RoHS Statement: This product, as well as its related consumables and spares, complies with the reduction in hazardous substances provisions of the "India E-waste (Management and Handling) Rule 2016." It does not contain lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for where allowed pursuant to the exemptions set in Schedule 2 of the Rule.
Japan VCCI Statement: This is a Class B device. For use in residential environments. If used near radio or television receivers, it may cause reception interference. Please follow the instructions in the manual for correct operation.
Turkey WEEE Statement: Complies with the Turkish WEEE Regulation.
Model: CS008
© Copyright 2022 HyperX and the HyperX logo are registered trademarks or trademarks of HP Inc. in the U.S. and/or other countries. All registered trademarks and trademarks are property of their respective owners.