Intermatic Ascend Timer Installation & Operation Manual
Models: STW700W Smart In-Wall Timer / ST700W Standard In-Wall Timer
Manufacturer: Intermatic Incorporated
Address: Libertyville, Illinois 60048
Website: www.intermatic.com
Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications. Such modifications could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, providing reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a different circuit than the receiver.
- Consult the dealer or an experienced radio/TV technician.
Important note: No changes to the antenna or device are permitted to comply with FCC RF exposure requirements.
This Class B digital apparatus complies with ICES-005 of Canada.
Warnings and Safety
⚠️ WARNING
Risk of Fire or Electric Shock
- Disconnect power at the circuit breaker(s) or disconnect switch(es) before installing or servicing.
- Installation and/or wiring must be in accordance with national and local electrical code requirements.
- Only use copper conductors rated 105°C minimum.
- Battery is not user replaceable.
- Do NOT use the timer to control devices that could have dangerous consequences due to inaccurate timing, such as sun lamps, saunas, heaters, and crock pots.
NOTICE
Dispose of product per local regulations on the disposal of lithium batteries.
Ratings
| Specification | Value |
|---|---|
| Operating Voltage | 120 VAC, 50/60 Hz |
| General Purpose | 15 A |
| Inductive Ballast | 15 A |
| Tungsten/Incandescent | 8 A |
| Electronic Ballast/LED | 5 A |
| LED Load | 600 W |
| Motor Load | 1 HP |
| Dimensions | 2 3/4" H x 1 3/4" W x 1 2/3" D |
1Type 1.C Action Operating Control, Pollution Degree 2, Impulse Voltage 2500 V
Wiring Diagrams
Single-Pole Wiring
This diagram illustrates the wiring for a single-pole installation.
- Line: Connects to the 120 V Power Source.
- Neutral: Connects to the Neutral wire from the Power Source and Load.
- Timer: The central unit.
- Load: Connects to the device being controlled.
- Wire Connections:
| Wire | Description |
|---|---|
| Blue | Connects to black wire from Load |
| White | Connects to white (neutral) wire from Load and Power Source |
| Black | Connects to black (hot) wire from Power Source |
| Green | Connects to ground |
| Red | Not used in single-pole installations |
To be installed in single- and double-gang with 2-1/2" minimum depth. Consult a qualified electrician for specific wiring details.
Typical Three-Way Wiring
This diagram shows a typical three-way wiring setup, allowing remote control.
- Line: Connects to the 120 V Power Source.
- Neutral: Connects to the Neutral wire from the Power Source and Load.
- Timer: The central unit.
- Existing Remote Switch: Connected between the Line and the Timer via a Red wire (up to 100 ft. MAX).
- Load: Connects to the device being controlled.
- Wire Connections:
| Wire | Description |
|---|---|
| Blue | Connects to black wire from Load |
| White | Connects to white (neutral) wire from Load and Power Source |
| Black | Connects to black (hot) wire from Power Source |
| Green | Connects to ground |
| Red | Connects through remote switch to black (hot) wire from Power Source |
For other three-way wiring scenarios, go to www.Intermatic.com/Ascend.
Product Overview
The Ascend 7-Day Timer portfolio includes two models: the ST700W Standard and the STW700W Wi-Fi enabled. Both models feature an intuitive control interface. The Wi-Fi enabled Timer offers a mobile app for quick setup, schedule saving for transfer to other Ascend Wi-Fi timers, and convenient monitoring from compatible Apple or Android mobile devices.
Access Point Mode
Creates a peer-to-peer communication network between the Timer and your mobile device for direct connection during initial setup, scheduling, and control.
Wi-Fi Mode (Local)
- Connects the Timer to your local wireless network.
- Provides constant connection for all Timers on your network when using the app.
Remote Access (Cloud)
Establishing an Intermatic Connect Account and registering your Timer(s) enables access from anywhere with an active Wi-Fi or cellular connection.
Voice Integration
Works with Alexa and Google Home. Setup requires the Alexa or Google Home apps. See the Intermatic website for installation details.
When paired with Alexa or Google Home, users can command the Timer ON/OFF, change modes, or get Timer status.
Setup Instructions
ST700W: Go to the 'Initial Setup at Timer' section for instructions.
STW700W: Go to the 'Initial Setup at Timer' section for instructions. Additionally, download the Intermatic Connect App from the Apple Store or Google Play Store and follow the in-app instructions to set up your timer.
Apple, App Store, Android, Alexa, and Google Play are trademarks of their respective owners and not of Intermatic, Inc.
Switch Interface
The timer features a user interface with navigation buttons and an LCD display.
Navigation Controls
- Menu: Accesses the main menu. ☰
- Scroll Up/Down: Navigates through options. ⬆️ / ⬇️
- ON/OFF or ENTER: Confirms selections or turns the device on/off. ?
LCD Display Icons and Indicators
- Mode of Operation: Shows current mode (e.g., AUTO).
- Lock: Indicates if the timer is locked. ?
- Wi-Fi: Shows Wi-Fi status. ?
- Mobile Device Connected: Indicates connection to a mobile device.
- Current Switch State: Displays ON or OFF status.
- Current Day/Time: Shows the current day and time.
- Next Scheduled Event: Displays the next programmed ON or OFF event.
Icon Descriptions
| Icon | Description |
|---|---|
| ? | Timer locked |
| ? | Wi-Fi active |
| ?? | Access Point Mode: Timer Connected |
| ?? | Access Point Mode: Timer waiting for connection |
| ? | Wi-Fi Mode: Timer connected to network |
| ?? | Wi-Fi Mode: Timer not connected to network |
Display icons change based on timer model and programmed settings.
Initial Setup at Timer
This section guides you through setting up the timer directly on the device.
Setup Process
- Press MENU for one-time setup.
- Scroll UP/DOWN to the desired option on the menu screen.
- The selected option will blink.
- Press ENTER to confirm and move to the next menu.
Alternative Setup: Use the Intermatic Connect App. Visit Intermatic.com and search for STW700W for app details.
Note: The app setup option is only for the STW700W Wi-Fi enabled model. Press ENTER to begin setup for the ST700W standard model. All screens must be completed before returning to the Timer interface.
Refer to:
- Page 11 for Schedule Templates.
- Page 20 for Latitude/Longitude estimation chart or perform an app/Internet search for location-specific values.
The SSID and Wi-Fi icons are not available for the ST700W model.
Setting Time & Date
- Time Format: Select AM/PM or 24-hour format.
- Time: Set the current time (e.g., 12:00 AM).
- Date: Set the current date (e.g., 01/01/17).
- Daylight Saving Time: Turn ON or OFF.
Location and Time Zone Setup
Enter Location Settings:
- Latitude: e.g., 42.0°
- Longitude: e.g., -82.5°
Select Country: USA, Mexico, Canada.
Set Time Zone: Pacific, Mountain, Central, Eastern.
After entering these details, press ENTER for 'Settings Saved'.
Schedule Setup
After saving settings, you will be prompted: 'Do you want to setup a schedule?'
- Select 'YES' to proceed with schedule setup.
- Select 'NO' to skip schedule setup and finish.
The timer will then show 'SETUP COMPLETE' in either AUTO or MANUAL mode.
Schedule Options
- ON all night
- ON evenings
- ON morning/evening
- Custom Schedule
- Cancel
Modes
The timer offers different operating modes:
| Mode | Description |
|---|---|
| Auto | Timer operates using your programmed schedule of weekly ON/OFF events. |
| Random | Similar to Auto mode, but programmed schedule occurs randomly at +/- 15 minutes from the programmed time. |
| Manual | Operates like a manual toggle switch to turn devices ON and OFF, regardless of programmed schedules. |
To enter Auto or Random mode, a programmed schedule must be loaded into memory.
Schedule Templates
Templates provide pre-set schedules that can override your current schedule.
Select Templates
- Navigate to Schedule > Templates.
- Options include 'Edit Schedule', 'Templates', and 'Clear'.
Available Templates
- Template 1 of 3: On @ Dusk, Off @ Dawn, All Days
- Template 2 of 3: On @ Dusk, Off @ 10:00 PM, All Days
- Template 3 of 3: On @ 5:00 AM, Off @ Dawn, On @ Dusk, Off @ 10:00 PM, All Days
You will be prompted to CONFIRM if you want to overwrite the active schedule with a selected template.
Once a Template becomes your current schedule, you can edit the events. Template events in this menu cannot be altered. Reference page 14 to Edit Schedule events.
New Schedule Creation
This section details how to create custom schedules.
Menu Options
- Navigate to Schedule > Edit Schedule > Add New Event.
Event Configuration
Action
- Enter to modify Action. 'Turn OFF' will blink.
- Scroll UP/DOWN to select 'Turn On' or 'Turn Off'.
- Press ENTER to confirm.
Days
- Enter to modify Days. 'No Days' will blink.
- Scroll UP/DOWN to select:
- All Days
- Weekdays
- Weekends
- Define Days
- For 'Define Days', use UP/DOWN to select/deselect specific days (Sun, Mon, Tue, Wed, Thu, Fri, Sat) and press ENTER to confirm each day.
- Press ENTER to confirm the day selection.
Time
- Enter to modify Time. 'No Time' will blink.
- Scroll UP/DOWN to select:
- Define Time
- Dusk
- Dawn
- Press ENTER to confirm your selection.
- For 'Define Time', use UP/DOWN to increase/decrease the time.
- Press ENTER to confirm the time.
The Offset function allows Dusk/Dawn events to activate before or after the actual Dusk/Dawn time for your location. You can set an offset of +/- 0 to 120 minutes.
Edit Schedule
Modify or remove existing schedule events.
Selecting an Event
- Navigate to Schedule > Edit Schedule.
- Scroll UP/DOWN to select the event you wish to edit or add a new event.
- Press ENTER to select an event.
Editing an Event
- After selecting an event, choose 'Edit' to change its Action, Days, or Time. (Refer to page 12 for options).
- Choose 'Clear' to remove the event from the schedule.
'Clear' will delete the current schedule.
Error Messages
Troubleshoot common error messages:
| Error | Resolution |
|---|---|
| No Days | Add a day to your event. Options: All Days, Weekdays, Weekends, Define Days. |
| Duplicates | A duplicate event exists. Modify or cancel your event. |
| No Time | Add a time to your event. Options: Define Time, Dusk, Dawn. |
| No Memory | Remove an event before adding a new one. |
Settings
Configure various timer settings.
Menu Options
- Navigate to Settings.
- Options include: Time & Date, Location, System, Wi-Fi.
Time & Date Settings
- Time Format: Select 12-hour (AM/PM) or 24-hour format.
- Time: Set the current time.
- Date: Set the current date.
- Daylight Saving Time: Turn ON or OFF.
Location Settings
Program your latitude, longitude, country, and timezone.
- Latitude: e.g., 42.0°
- Longitude: e.g., -82.5°
- Country: USA, Mexico, Canada.
- Timezone: Pacific, Mountain, Central, Eastern.
System Settings
| Setting | Description |
|---|---|
| Lock Timer | Prevents access to Timer schedules and functions. To unlock, press and hold the UP and DOWN buttons for three seconds. |
| Auto-Sleep | Dims the display after one minute of inactivity. |
| System Restart | Resets the timer but maintains all settings and schedules. Restores communication between the timer and router (STW700W only). |
| Set Factory Defaults | Restores the timer to out-of-box condition, clearing programming, time settings, schedules, error log, and Wi-Fi settings. |
Wi-Fi Settings (STW700W Model Only)
Clears and resets your Wi-Fi to Access Point Mode. To re-establish a Wi-Fi connection, refer to the app.
- Reset WiFi: NO (Erases Wi-Fi settings).
Info Menu Overview
Access information about your timer.
Menu Options
- Navigate to Info.
- Options include: Wireless, Dawn/Dusk, Error Log, About.
Wireless Settings (STW700W Model Only)
View IP Address, Timer SSID number, and security PIN.
- IP: 192.168.255.42
- Security: WPA
- RSSI: Strong
- SSID: 7DT-F8F005F1CD36
- PIN: 46090
Your security PIN is a unique code that allows the app to connect to your Timer.
Dawn/Dusk
Shows current time, date, and associated Dawn or Dusk times for your set location.
- Example: Time: 4:53 AM, Date: 08/04/16, Loc: 27.1, -169.2, Dawn: 7:15 AM, Dusk: 10:02 PM
Error Log
Scroll UP/DOWN to view logged system issues.
- Example: Error 1 of 10: Date: 06/23/2016, Time: 11:42 PM, Error: E-7
About
View timer information including model, version, and manufacturing date. Contact details for Intermatic, Inc. are also provided.
- Model: STW700W v01.00.04
- Manufacturer: Intermatic, Inc.
- Contact: 1.815.675.7000, Intermatic.com
Latitude/Longitude Charts
The manual includes charts listing approximate Latitude and Longitude for major cities in the United States, Canada, and Mexico. These charts are provided to help users determine their location's coordinates for accurate timer settings.
Note: These charts provide approximate information on your Latitude and Longitude. Perform an app or Internet search for location specific values.
Troubleshooting
This section addresses common problems and their solutions.
| Problem | Possible Cause | What To Do |
|---|---|---|
| Timer won't enter Auto or Random mode when you press Mode. | A schedule is not saved. | Choose a template or define a schedule of events. |
| Timer switches at incorrect times or skips some of the programmed times. | The active schedule has an invalid setting. | Review the settings and revise them as necessary. |
| Timer is in Random mode, which varies switching times up to +/- 15 minutes. | Select the Auto Mode. | |
| The Astronomic and Defined switching times are in conflict, your DST may or may not be turned on, or your timezone and location are not configured properly. | Review your program settings and revise them as necessary. | |
| Load only operates when the remote (3-way) switch is in one position or the Timer ignores the remote switch. | The remote switch is wired incorrectly. | Recheck the wiring, especially for the jumper. |
| The remote switch or switch timer is wired wrong. | Contact a qualified electrician. | |
| There is an excessive length of wire (greater than 100 feet). | ||
| There is buried wire to the remote switch. | ||
| The Timer ignores a 3-way remote switch even though it is wired correctly or the load turns off immediately after being turned ON. | The remote switch is not functioning properly or worn out. | Contact a qualified electrician. |
| Timer shows ON but the light or other controlled device is OFF. | The light or controlled device itself may be switched OFF. | Make sure the light or controlled device is switched ON and plugged in. |
| Screen is OFF. | Timer is set up in Sleep Mode to turn the screen OFF after one minute of inactivity. |
|
| Timer is not connecting to my local Wi-Fi network. (STW700W only) | Timer display shows: ? or ?? icon. Timer is in Access Point Mode or the Access Point Mode is not connected. | Follow app instructions to connect the Timer to your local Wi-Fi network. |
| Timer shows: ? icon. Timer is waiting for a connection. The router password for the local router may be incorrect. |
| |
| Can't connect my mobile device to my Timer. (STW700W only) | No ? icon is showing. Model does not have a Wi-Fi radio, or the radio is not turning ON. |
|
| ? icon is showing. Timer is connected to a Wi-Fi network. The mobile device may not be connected to the same network. |
| |
| ? icon is showing. Timer is in Access Point Mode, waiting for mobile device connection. | Follow app instructions to connect to Timer. Make sure you are not in a wireless "dead zone" when attempting to connect. | |
| ? icon is showing. Timer is already connected to a mobile device. |
|
For more troubleshooting tips, contact Intermatic Tech Support at: 815-675-7000.
Warranty
Limited Warranty
Warranty service is available by returning the product to the dealer or completing a warranty claim online at www.intermatic.com. This warranty is made by: Intermatic Incorporated, Customer Service, 1950 Innovation Way, Suite 300, Libertyville, IL 60048.
For warranty service, visit http://www.Intermatic.com or call 815-675-7000. For complete information on Intermatic products, literature, and Contractor Guides, visit www.intermatic.com.
Intermatic.com
Intermatic.com
