• Works with Alexa compatibility. Through the Alexa app, enable Intermatic - Home Skills and Intermatic - Custom Skills. • Works with Alexa, for ON/OFF, mode changes, and status updates. Setup Instructions ST700W: • Go to page 8 for Initial Setup at Timer instructions. STW700W: • Go to page 8 for Initial Setup at Timer instructions.
Spring Grove, Illinois 60081 www.intermatic.com
AscendTM
Timer Installation & Operation Manual
STW700W Smart In-Wall Timer/ ST700W Standard In-Wall Timer
COMPLIANCE
This device complies with part 15 of the FCC. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Important note: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user 's authority to operate the device.
This Class B digital apparatus complies with ICES-005 of Canada.
2
WARNINGS/SAFETY
WARNING
Risk of Fire or Electric Shock
· Disconnect power at the circuit breaker(s) or disconnect switch(es) before installing or servicing.
· Installation and/or wiring must be in accordance with national and local electrical code requirements.
· Only use copper conductors rated 105°C minimum · Battery is not user replaceable. · Do NOT use timer to control devices that could have
dangerous consequences due to inaccurate timing, such as sun lamps, saunas, heaters, and crock pots.
NOTICE
Dispose of product per local regulations on the disposal of lithium batteries.
Ratings1
Operating Voltage
120 VAC, 50/60 Hz
General Purpose
15 A
Inductive Ballast
15 A
Tungsten/Incandescent 8 A
Electronic Ballast/LED 5 A
LED Load
600 W
Motor Load
1 HP
Dimensions
2 3/4" H x 1 3/4" W x 1 2/3" D
1Type 1.C Action Operating Control, Pollution Degree 2, Impulse Voltage 2500 V
3
SINGLE-POLE WIRING
Line
Black
Red
120 V Power Source
Neutral
Timer White
Blue
Green
Load
Wire Description
Blue Connects to black wire from Load
White Connects to white (neutral) wire from Load and Power Source
Black Connects to black (hot) wire from Power Source
Green Connects to ground
Red Not used in single-pole installations
Note: To be installed in single- and double-gang with 2-1/2" minimum depth. Please consult a qualified electrician for specific wiring details.
4
TYPICAL THREE-WAY WIRING
Line
Common Terminal
Black
120 V Power Source
Timer
White
Existing Remote Switch Red
100 ft. MAX
No Longer Used
Blue
Neutral
Green
Load
Wire Description Blue Connects to black wire from Load
White Connects to white (neutral) wire from Load and Power Source
Black Connects to black (hot) wire from Power Source
Green Connects to ground
Red Connects through remote switch to black (hot) wire from Power Source
Note: For other three-way wiring scenarios,
go to www.Intermatic.com/Ascend.
5
PRODUCT OVERVIEW
The Ascend 7-Day Timer portfolio consists of two timer models: ST700W Standard and STW700W Wi-Fi enabled. In addition to the intuitive control interface common to both models, the Wi-Fi enabled Timer offers a mobile app for access to a quick setup feature, the ability to save schedules for easy transfer to other Ascend Wi-Fi enabled timers, and convenient monitoring from compatible Apple or Android mobile devices.
Access Point Mode · Creates a peer to peer communication network between the Timer and your mobile device to offer a direct connection for initial setup, scheduling, and control of your Timer.
Wi-Fi Mode (Local) · Connects the Timer to your local wireless network. · Provides the benefit of constant connection with every Timer on your network, when using the app.
Remote Access (Cloud) · Establishing an Intermatic Connect Account and registering a Timer(s) with your account, enables access from anywhere you have an active Wi-Fi or cellular connection.
Voice Integration · Works with Alexa compatibility. Through the Alexa app, enable Intermatic - Home Skills and Intermatic - Custom Skills. · Works with Alexa, for ON/OFF, mode changes, and status updates.
Setup Instructions
ST700W: · Go to page 8 for Initial Setup at Timer instructions.
STW700W: · Go to page 8 for Initial Setup at Timer instructions.
· Go to App Store or Google Play and download the Intermatic Ascend app for initial setup.
Apple, App Store, Android, Alexa, and Google Play are trademarks of their respective owners
6
and not of Intermatic, Inc., which is not associated or affiliated with any of the owners.
SWITCH INTERFACE
Menu Scroll Up Scroll Down
Icon Description
Timer locked
LCD Display
ON/OFF or ENTER
Wi-Fi active
Access Point Mode Timer Connected
Access Point Mode Timer waiting for connection Wi-Fi Mode Timer connected to network Wi-Fi Mode Timer not connected to network
LCD Display
Mode of Operation Lock Wi-Fi Mobile Device Connected
Current Switch State Current Day/Time
Next Scheduled Event
Note: Display icons change based on timer model
and programmed settings.
7
INITIAL SETUP AT TIMER
SET TIME & DATE
Settings
Press MENU for one-time Setup.
OFF
SSID: 7DT-F8F005F1CD36
Press [ENTER] to Setup Here.
Or
Use APP to Setup For APP, visit:
Intermatic.com Search for: STW700W
Time Format:
AM / PM
Settings
Time:
12:00 AM
Settings
Date:
01/01/17
Settings
Daylight Saving Time:
1. Scroll UP/DOWN to desired option on the menu screen
ON
2. Option blinks when selected
3. Press ENTER to confirm and move to the next menu
Note:
· The app setup option is only applicable to the STW700W Wi-Fi enabled model. Press ENTER to begin setup for the ST700W standard model.
· You must complete all screens before returning to the Timer interface screen.
· Refer to page 11 for descriptions of Schedule Templates.
· Refer to the Latitude/Longitude estimation chart on page 20 or perform an app or Internet search for location specific values.
· The SSID and the and icons are not available for the ST700W.
8
ENTER LOCATION SETTINGS
Settings
Latitude:
42.0°
Settings
Longitude:
-82.5°
SELECT COUNTRY
Settings
Country: USA Mexica Canada
SET TIME ZONE
Settings
Timezone:
Pacific Mountain Central Eastern
PRESS ENTER
Settings Saved
SELECT SCHEDULE
Schedule
1 ON all night 2 ON evenings 3 ON morning/evening 4 Custom Schedule 5 Cancel
SETUP COMPLETE
SETUP SCHEDULE?
Yes
Do you want to setup a schedule?
YES
No
SETUP COMPLETE MANUAL
OFF
Fri 11:00 AM
9
MODES
Main Menu
Mode Schedule Settings Info
SELECT MODE
Select Mode
Auto Random Manual
Auto Random Manual
Timer operates using your programmed schedule of weekly ON/OFF events.
Similar to Auto mode except that your programmed schedule occurs randomly at +/- 15 minutes from the programmed time.
Operates like a manual toggle switch to turn devices ON and OFF, regardless of any schedules programmed in the timer.
Note: To enter Auto or Random mode, a programmed schedule must be loaded into memory.
10
SCHEDULE TEMPLATES
Main Menu
Mode Schedule Settings Info
SELECT TEMPLATES
Schedule
Edit Schedule Templates Clear
Template 1 of 3
SELECT TEMPLATE
OPTION
1. On @ Dusk Off @ Dawn All Days
Template 2 of 3
2. On @ Dusk Off @ 10:00 PM All Days
Template 3 of 3
3. On @ 5:00 AM Off @ Dawn On @ Dusk Off @ 10:00 PM All Days
CONFIRM
Overwrite active schedule with Template 1?
YES
Note: · A Template is a pre-set schedule of events that overrides your current schedule when chosen.
· Once a Template becomes your current schedule, you can edit the events.
· Template events in this menu cannot be altered.
· Reference page 14 to Edit Schedule events.
11
NEW SCHEDULE
Main Menu
Mode Schedule Settings Info
Schedule
Edit Schedule Templates Clear
New Event 1 Add New Event
Menu Options
Action
1. Enter to modify Action · Turn OFF blinks
2. Scroll UP/DOWN to select: · Turn On · Turn Off
3. ENTER to confirm
Event 1 (new): Action: Turn Off Days: No Days Time: No Time
Cancel
Note: At any time, scroll to and press ENTER to go back to the Main Menu or choose Cancel to cancel input.
12
Days 1. Enter to modify Days
· No Days blinks 2. Scroll UP/DOWN to select:
· All Days · Weekdays · Weekends · Define Days
a. UP/DOWN to select/deselect days b. ENTER to confirm day c. Select to confirm 3. ENTER to confirm
Event 1 (new): Action: Turn On Days: No Days Time: No Time
Cancel
Event 1 (new):
Days of Week:
Sun Thu
Mon Fri
Tue
Sat
Wed
Time
1. Enter to modify Time · No Time blinks
2. Scroll UP/DOWN to select: · Define Time · Dusk · Dawn
3. ENTER to confirm selection 4. UP/DOWN to increase/decrease time 5. ENTER to confirm
Event 1 (new): Action: Turn On Days: No Days Time: Dawn
0 mins Offset
Cancel
Event 1 (new): Action: Turn On Days: No Days Time: Define Time
12:00 AM
Cancel
Note: The Offset function allows Dusk/Dawn events to activate before or after the actual Dusk/Dawn time for your
location. You can set an offset of +/- 0 to 120 minutes. 13
EDIT SCHEDULE
Main Menu
Mode Schedule Settings Info
SELECT EDIT SCHEDULE
Schedule
Edit Schedule Templates Clear
SCROLL UP/DOWN TO SELECT EVENT
Event 1 of 2 1 On @ 4:00 AM
All Days
2 Off @ Dawn -120m Weekends
Note: Clear will delete the current schedule.
New Event 3 Add New Event
Edit Event
Event 1 of 2 1 On @ 4:00 AM
All Days
2 Off @ Dawn -120m Weekends
Event 1 of 2 1 On @ 4:00 AM
All Days
Edit Clear Cancel
Event 1: Action: Turn On Days: All Days Time: Define Time
4:00 AM
Cancel
· ENTER to select event EDIT to change the event (Refer to page 12 for options) CLEAR to remove event from schedule
14
ERROR MESSAGES
Error No Days
Duplicates No Time
No Memory
Resolution
Add a day to your event. Options include: · All Days · Weekdays · Weekends · Define Days
A duplicate event exists. Modify or cancel your event.
Add a time to your event. Options include: · Define Time · Dusk · Dawn
Remove an event before adding a new one.
15
SETTINGS
Main Menu
Mode Schedule Settings Info
SELECT OPTION
Settings
Time & Date Location System WiFi
Menu Options
Time & Date
Settings
Settings
Settings
Settings
AM / PM12:00 AM01/01/17 ON Time Format:
Time:
Date:
Daylight Saving Time:
Select a 12-hour am/pm or 24-hour time format. Choose the time and date then choose to turn Daylight Saving Time ON or OFF.
16
Location
Settings
Latitude:
42.0°
Settings
Longitude:
-82.5°
Settings
Country:
USA Mexica Canada
Settings
Timezone:
Pacific Mountain Central Eastern
Program your latitude, longitude, country and timezone.
System
Settings Lock Timer:
OFF
To Unlock, hold [Up]/[Dn] buttons.
Settings
Auto-Sleep:
ON
Display is dimmed after inactivity.
Settings System Restart:
YES
Keeps all settings and schedule.
Settings Set Factory Defaults:
YES
Erases all settings and schedule.
Lock Timer
Auto-Sleep System Restart
Set Factory Defaults
· Prevents access to Timer schedules and functions · To unlock: press and hold the UP and DOWN buttons for
three seconds
Dims display after one minute of inactivity
· Resets timer but maintains all settings and schedules · Restores communication between the timer and router · Applies to STW700W only
· Restores timer to out-of-box condition · Clears programming, time settings, schedules, error log
and wi-fi settings
Wi-Fi
Settings
Clears and resets your Wi-Fi to Acess Reset WiFi:
Point Mode. To re-establish a Wi-Fi connection refer to the app.
NO
Erases WiFi
settings.
17
INFO MENU OVERVIEW
Main Menu
Mode Schedule Settings Info
SELECT OPTION
Info
Wireless Dawn/Dusk Error Log About
Menu Options
Wireless Settings (STW700W model only)
This option lets you view your IP Address, identify your Timer SSID number, and view your security PIN information.
Note: Your security PIN is a unique code that allows the app to connect to your Timer.
Wireless Settings
IP: 192.168.255.42 Security: WPA RSSI: Strong SSID:
7DT-F8F005F1CD36
PIN: 46090
18
Dawn/Dusk
This option shows you the current time, the date, and the time associated with Dawn or Dusk in your set location.
Dawn/Dusk
Time: 4:53 AM Date: 08/04/16 Loc: 27.1 , -169.2 Dawn: 7:15 AM Dusk: 10:02 PM
Error Log
Scroll UP/DOWN through the error log to view any issues logged in your system.
Error Log
Error 1 of 10:
Date: 06/23/2016 Time: 11:42 PM Error: E-7
About
View the information associated with your timer, including model, version, and manufacturing date. You can also find contact details for Intermatic, Inc.
About
Model: STW700W v01.00.04 Mfg: 01L Intermatic, Inc. 1.815.675.7000 Intermatic.com
19
LATITUDE/LONGITUDE
Major United States Cities
City Albany, NY Albuquerque, NM Amarillo, TX Anchorage, AK Atlanta, GA Austin, TX Baker, OR Baltimore, MD Bangor, ME Birmingham, AL Bismarck, ND Boise, ID Boston, MA Buffalo, NY Carlsbad, NM Charleston, WV Charlotte, NC Cheyenne, WY Chicago, IL Cincinnati, OH Cleveland, OH Columbia, SC Columbus, OH Dallas, TX Denver, CO Des Moines, IA Detroit, MI Dubuque, IA Duluth, MN El Paso, TX Eugene, OR Fargo, ND Flagstaff, AZ
Lat. n° 43 35 35 61 34 30 45 39 45 34 47 44 42 43 32 38 35 41 42 39 41 34 40 33 40 42 42 43 47 32 44 47 35
Long. w° -74 -107 -102 -150 -84 -98 -118 -77 -69 -87 -101 -116 -71 -79 -104 -82 -81 -105 -88 -85 -82 -81 -83 -97 -105 -94 -83 -91 -92 -106 -123 -97 -112
City Fresno, CA Grand Rapids, MI Helena, MT Honolulu, HI Hot Springs, AR Houston, TX ID Falls, ID Indianapolis, IN Jackson, MS Jacksonville, FL Juneau, AK Kansas City, MO Key West, FL Klamath Falls, OR Knoxville, TN Las Vegas, NV Los Angeles, CA Louisville, KY Manchester, NH Memphis, TN Miami, FL Milwaukee, WI Minneapolis, MN Mobile, AL Montgomery, AL Montpelier, VT Nashville, TN New Haven, CT New Orleans, LA New York, NY Nome, AK Oklahoma City, OK Philadelphia, PA
20
Lat. n° 37 43 47 21 35 30 44 40 32 30 58 39 25 42 36 36 34 38 43 35 26 43 45 31 32 44 36 41 30 41 64 35 40
Long. w° -120 -86 -112 -158 -93 -95 -112 -86 -90 -82 -134 -95 -82 -122 -84 -115 -118 -86 -72 -90 -80 -88 -93 -88 -86 -73 -87 -73 -90 -74 -166 -97 -75
City Phoenix, AZ Pierre, SD Pittsburgh, PA Portland, ME Portland, OR Providence, RI Raleigh, NC Reno, NV Richfield, UT Richmond, VA Roanoke, VA Sacramento, CA Salt Lake City, UT San Antonio, TX San Diego, CA San Francisco, CA San Juan, PR Savannah, GA Seattle, WA Shreveport, LA Sioux Falls, SD Spokane, WA Springfield, IL Springfield, MO St. Louis, MO Syracuse, NY Tampa, FL Virginia Beach, VA Washington, D.C. Wichita, KS Wilmington, NC
Lat. n° 33 44 40 44 46 42 36 40 39 38 37 39 41 29 33 38 19 32 48 32 44 48 40 37 39 43 28 37 39 38 34
Long. w° -112 -100 -80 -70 -123 -71 -79 -120 -112 -77 -80 -122 -112 -99 -117 -122 -66 -81 -122 -94 -97 -117 -90 -93 -90 -76 -82 -76 -77 -97 -78
Note: These charts provide approximate information on your Latitude and Longitude. Perform an app or Internet search for location specific values.
Major Canadian Cities
City Calgary, AL Edmonton, AL Fredericton, NB Halifax, NS London, ON Montreal, QC Nelson, BC Ottawa, ON Quebec, QC Regina, SK Toronto, ON Vancouver, BC Whitehorse, YT Winnipeg, MB
Lat. n° 51 54 46 45 43 46 50 45 53 50 44 49 61 50
Major Mexican Cities
City Acapulco Cancún Colima Culiacán Durango Guadalajara La Paz León Mérida Mexico City Monterrey Morelia Oaxaca Querétaro Tepic Tuxtla Gutiérrez Veracruz Villahermosa Zacatecas
Lat. n° 17 21 19 25 24 21 24 21 21 19 26 20 17 21 22 17 19 18 23
Long. w° -114 -113 -67 -64 -82 -74 -117 -76 -74 -105 -79 -123 -135 -97
Long. w° -100 -87 -104 -107 -105 -103 -110 -102 -90 -99 -100 -101 -97 -100 -105 -93 -96 -93 -103
21
TROUBLESHOOTING
Problem
Possible Cause
What To Do
Timer won't enter Auto A schedule is not saved.
Choose a template or define
or Random mode when
a schedule of events.
you press Mode.
Timer switches at
The active schedule has an invalid Review the settings and
incorrect times or
setting.
revise them as necessary.
skips some of the programmed times.
Timer is in Random mode, which varies switching times up to
Select the Auto Mode.
+/- 15 minutes.
The Astronomic and Defined
Review your program
switching times are in conflict, your settings and revise them as
DST may or may not be turned on, or necessary.
your timezone and location are not
configured properly.
Note: Your switch timer automati-
cally skips any conflicting ON event
as summer approaches to prevent
unwanted operation of lights or other
controlled devices.
Load only operates when the remote (3way) switch is in one position or the Timer ignores the remote switch. The Timer ignores a 3-way remote switch even though it is wired correctly or the load turns off immediately after being turned ON.
Timer shows ON but the light or other controlled device is OFF. Screen is OFF.
The remote switch is wired incorrectly.
· The remote switch or switch timer is wired wrong.
· There is an excessive length of wire (greater than 100 feet).
· There is buried wire to the remote switch.
· The remote switch is not functioning properly or worn out.
The light or controlled device itself may be switched OFF.
Timer is set up in Sleep Mode to turn the screen OFF after one minute of inactivity.
Recheck the wiring, especially for the jumper.
Contact a qualified electrician.
Make sure the light or controlled device is switched ON and plugged in. · Hit any key to wake up
Timer. · To keep screen ON all the
time, change the Sleep Mode setting to OFF.
22
Problem
Possible Cause
What To Do
Timer is not connecting
Follow app instructions to
to my local Wi-Fi
Timer display shows: or icon. connect the Timer to your
network.
Timer is in Access Point Mode or the local Wi-Fi network
(applies to STW700W Access Point Mode is not connected.
only)
Timer shows:
icon.
· Check Wi-Fi router to make sure it is ON.
Timer is waiting for a connection. · Use app to revise Wi-Fi
The router password for the local
settings and reconnect to
router may be incorrect.
your router.
Can't connect my mobile device to my Timer. (applies to STW700W
No
icon is showing.
· Make sure you have the
Model does not have a Wi-Fi radio, or STW700W Wi-Fi enabled
the radio is not turning ON.
Timer model.
· Try resetting the W-Fi and
only)
Timer. If problem persists,
contact Intermatic.
icon is showing. Timer is
· Make sure your mobile
connected to a Wi-Fi network. The
device is connected to the
mobile device may not be connected same local Wi-Fi network.
to the same network.
· To disconnect Timer from
current Wi-Fi network,
perform a Wi-Fi reset at
the Timer.
icon is showing. Timer is in Access Point Mode, waiting for mobile device connection.
Follow app instructions to connect to Timer. Make sure you are not in a wireless "dead zone" when attempting
to connect.
· Check your mobile device
icon is showing. Timer is already Wi-Fi settings. If connected
connected to a mobile device.
to the 7DT-xxx network,
go to the app and choose
Search.
· If your mobile device is not
connected, there is another
mobile device already
connected. Disconnect the
other device.
Note: For more troubleshooting tips, contact Intermatic Tech Support at: 815-675-7000.
23
WARRANTY
LIMITED THREE-YEAR WARRANTY
If within the warranty period specified, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace it, at its sole option, free of charge. This warranty is extended to the original household purchaser only and is not transferable. This warranty does not apply to: (a) damage to units caused by accident, dropping or abuse in handling, acts of God or any negligent use; (b) units which have been subject to unauthorized repair, opened, taken apart or otherwise modified; (c) units not used in accordance with instructions; (d) damages exceeding the cost of the product; (e) sealed lamps and/or lamp bulbs, LED's and batteries; (f) the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear; (g) transit damage, initial installation costs, removal costs or reinstallation costs.
INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES. ALL IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL BE OF THE SAME DURATION AS THE WARRANTY PERIOD STATED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased or (b) completing a warranty claim online at www.Intermatic.com. This warranty is made by: Intermatic Incorporated, Customer Service 7777 Winn Rd., Spring Grove, Illinois 60081-9698. For warranty service go to: www.Intermatic.com or call 815-675-7000.
For complete information on Intermatic products, literature and Contractors Guides visit: www.Intermatic.com/Ascend or www.Intermatic.com/AscendSupport.
24
158--01887 (5-7-18)
Intermatic Ascend Timer Installation and Operation Manual Comprehensive guide for installing and operating the Intermatic Ascend 7-Day Timer, including models ST700W Standard and STW700W Wi-Fi enabled. Covers setup, modes, scheduling, wiring, troubleshooting, and warranty information.
