QFX TMS-1560 Portable Bluetooth Speaker

Important Safety Warnings

⚠️ WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.

To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this product near any liquids, heat sources such as radiators, heat registers or under extreme weather conditions. Clean only with a dry cloth.

Users should exhibit extra safety when the WARNING or CAUTION symbol appears in this instruction manual and follow all precautions as they are stated.

Battery Information

The TMS-1560 is a Lithium battery powered PA loudspeaker. Be sure that you have completely charged the battery prior to first use to maximize battery's lifespan.

Once the power adapter is connected to a power source, it will automatically begin charging (approximately 4-5 hours to fully charge the lithium battery). Even if the battery power is low, the unit will power on when connected to a power source.

When the battery power is charging, the battery indicator light is red. When the battery is fully charged, the indicator light will turn off. Upon completion of the charging, please disconnect the unit.

When not in use, the speaker should always be set to OFF to prevent the unit from draining the battery. When the unit is not used for prolonged periods of time, the battery will gradually lose its power. It is recommended to fully charge the battery at least every 60 days.

Speaker Layout

The top panel of the TMS-1560 speaker features a control interface including the power switch, master volume knob, echo knob, microphone volume knob, bass knob, treble knob, and mode button. Input ports are located on the rear or side, typically including a TF Card Slot, USB Slot, AUX Input, and Microphone Input. A DC power input port and a battery indicator light are also present.

Speaker Functions

Top Panel Controls

• [Power ON/OFF]: Power switch for the unit.
• [Master Volume Knob]: Adjusts the main volume from minimum to maximum.
• [Echo Knob]: Adjusts the echo effect level from minimum to maximum.
• [Microphone Volume Knob]: Adjusts the microphone input volume from minimum to maximum.
• [Bass Knob]: Adjusts the bass frequencies from minimum to maximum.
• [Treble Knob]: Adjusts the treble frequencies from minimum to maximum.
• [Mode Button]: Short press to cycle through input modes (AUX, USB, TF, FM, BT). Press and hold to turn the unit's light on or off.
• [Previous Track]: Selects the previous track.
• [Play/Pause]: Plays or pauses the current track. Also used for TWS connection.
• [Next Track]: Selects the next track. Press and hold to activate/deactivate Mic Priority.

Input Ports and Indicators

• [TF Card Slot]: For inserting TF memory cards.
• [USB Slot]: For connecting USB flash drives.
• [AUX Input]: For connecting external audio devices via AUX cable.
• [Microphone Input]: For connecting a microphone.
• [Battery Indicator]: Shows the battery status (red when charging, off when fully charged).
• DC 13.5V Power Input: Port for the power adapter.

LED Display and Modes

The LED display screen shows the current input mode (USB, TF, BT, AUX, FM). When a USB flash drive or TF card is inserted, the unit automatically switches to USB/TF mode and begins playing MP3 audio files.

In USB/TF mode, the display shows the track number currently playing.

In FM mode, all FM channels are displayed. A short press of the [Play/Pause] button initiates an automatic scan for all available channels.

Remote Control Functions

Remote Buttons

• [Power]: Turns the unit ON or puts it into Standby mode.
• [MODE]: Selects the input source (USB, TF, FM, AUX, BT).
• [Mute]: Silences the audio output.
• [Play/Pause]: Plays or pauses the current track.
• [Previous Channel/Track]: Selects the previous channel (in FM mode) or track (in USB/TF/BT mode).
• [Next Channel/Track]: Selects the next channel (in FM mode) or track (in USB/TF/BT mode).
• [EQ]: Cycles through equalizer presets.
• [VOL-]: Decreases the master volume.
• [VOL+]: Increases the master volume.
• [REP]: Repeats the current track.
• [SCAN]: Scans for channels in FM mode.
• [0-9]: Numeric buttons for direct track selection on USB flash drives or TF cards.

Remote Layout Description

The remote control is rectangular with a power button at the top. Below are mode selection and audio control buttons (Mute, Play/Pause, Previous, Next, EQ, Volume Up/Down). A numeric keypad (0-9) is centrally located, followed by the Repeat and Scan buttons.