QFX LMS-26 Portable Bluetooth Speaker

Product Overview

The QFX LMS-26 is a portable speaker designed for parties and personal audio enjoyment. It features Bluetooth connectivity, True Wireless Stereo (TWS) capability, FM radio, a microphone input with volume and echo controls, and customizable LED lighting effects.

Visual Description: The QFX LMS-26 speaker is a rectangular unit with a prominent front grille that illuminates with colorful LED lights. It comes with a wired microphone and a remote control for convenient operation.

Main Unit Controls and Functions

The speaker features several controls on its top panel:

• Power/Master Volume: A knob to turn the unit ON/OFF and adjust the overall volume.
• CHARGE LIGHT: An indicator for battery charging status.
• CHARGING PORT: Connect the included AC cable (AC 110-240V, 50/60Hz) here for recharging.
• NEXT/REC: Press to select the next track or FM channel. Press and hold to record microphone input to USB/TF.
• PLAY/PAUSE/TWS: Press to play or pause audio. In FM mode, press to auto-scan FM channels. Press and hold for TWS sync.
• PREVIOUS/MIC PRI: Press to select the previous track or FM channel. Press to activate microphone priority mode, lowering music volume when the microphone is used.
• MODE/LED: Press to cycle through Bluetooth, AUX, USB/TF, and FM modes. Press and hold to activate the Liquid Motion party lights.
• USB/TF PORTS: Insert a USB drive or TF card with .mp3 music files for playback. Microphone recordings are saved here.
• AUX: Connect external audio devices using a 3.5mm TRS audio cable.
• MIC INPUT: Connect a microphone using a 6.35mm TRS cable.
• MIC VOL: Adjusts the microphone volume.
• MIC ECHO: Adds echo effect to the microphone signal.
• LED DISPLAY: Shows the current function or mode.

Remote Control Functions

The included remote control provides access to various functions:

• STAND BY: Turns the unit ON/OFF.
• MODE: Switches the media input mode (Bluetooth, AUX, USB/TF, FM).
• MUTE: Temporarily silences the volume.
• Play/Pause: Controls playback (play/pause).
• Previous Track: Skips to the previous track or FM channel.
• Next Track: Skips to the next track or FM channel.
• EQ: Selects preset equalizer modes.
• VOL-: Decreases the overall volume.
• VOL+: Increases the overall volume.
• Number Keypad (0-9): Used for direct track selection or FM channel input.
• RPT: Repeats the current track or shuffles playback.
• U/SD: Selects the USB/TF card input source.

Operating Instructions

Bluetooth Pairing

1. Press the MODE button on the speaker or remote to enable Bluetooth mode. ?

2. On your mobile device, open Bluetooth settings and search for "QFX LMS-26".

3. Select "QFX LMS-26" to pair. Once connected, you can play music from your favorite apps.

The speaker will remember the connection and automatically reconnect when switching modes.

True Wireless Stereo (TWS) Setup

1. Ensure both QFX LMS-26 speakers are turned ON and in Bluetooth mode. ?

2. On one of the speakers, press and hold the "PLAY/PAUSE/TWS" button for 3 seconds. The speaker will indicate when TWS is connected.

3. On your mobile device, search for "QFX LMS-26" in Bluetooth settings and connect.

4. Enjoy True Wireless Stereo playback across both speakers. ▶️

5. To exit TWS mode, press and hold the "PLAY/PAUSE/TWS" button on either speaker.

FM Radio Usage

1. Press the "MODE" button repeatedly until FM mode is active. ?

2. In FM mode, press and hold the "PLAY/PAUSE/TWS" button to automatically scan and store available FM channels.

3. Use the "Next Track" ⏭️ and "Previous Track" ⏮️ buttons to switch between the saved FM channels.

Microphone Usage

1. Connect a microphone to the "MIC INPUT" ? using a 6.35mm TRS cable.

2. Adjust the microphone volume using the "MIC VOL" knob. ??

3. Enhance your voice with the "MIC ECHO" control. ?️

4. To prioritize microphone audio over music, press the "PREVIOUS/MIC PRI" button.

Limited Product Warranty Policy

QFX, Inc. warrants the Product to the original purchaser against defects in material or workmanship under normal, non-commercial use for the applicable Warranty Period (Parts and Labor). QFX will, at its option, repair or replace defective products with new or refurbished units, free of charge for parts and labor during the warranty period, excluding shipping charges.

Warranty Exclusions: This warranty does not cover damage from misuse, abuse, immersion in liquids, improper installation, accidents, unauthorized repairs, power surges, incorrect voltage, cosmetic damage, shipping damage, or acts of God. The product is intended for personal, non-commercial use only.

Customer Responsibilities: Before returning a product, customers should consult the manual and website (www.qfxusa.com) for troubleshooting. For warranty service, customers must contact QFX Customer Support, provide proof of purchase, a detailed description of the problem, and include all accessories. Return shipping costs are the customer's responsibility. Products returned without proper documentation or that are found to have no defect may be returned to the customer.

Legal Disclaimer: This warranty is provided in lieu of all other express or implied warranties. QFX disclaims warranties of merchantability and fitness for a particular purpose. Liability is limited to the product purchase price.

Contact and Support

For product support, warranty inquiries, or assistance:

• Phone: 1-800-864-CLUB (2582) or (323) 864-6900 (Monday - Friday, 9 AM - 5 PM PST)
• Email: support@qfxusa.com
• Website: www.qfxusa.com

RMA Processing Address:

QFX USA®, Inc.
RMA Processing
Customer Support Department
2957 E. 46th Street
Vernon, CA 90058

Follow QFX

Tag @QFXUSA on social media to share your experiences.

f ? ▶️ ?