ULINE H-3786 2 WAY SLANTED ARM CLOTHES RACK
Contact: 1-800-295-5510 | uline.com
Tool Included
The following tool is included for assembly:
?️ Crescent Wrench
Parts List
The following parts are included:
- Bolt x 2
- Lock Washer x 2
- Nameplate
- Metal Spacer
- Base Cover
- Plastic Base
- Post
- Arm x 2
Diagrams of each part are provided in the original document for visual reference.
Assembly Instructions
Step 1: Assemble the Base Components
Place the nameplate on top of the base cover. Then, position the nameplate and base cover assembly over the plastic base.
Diagram 1 shows the nameplate placed on the base cover, which is then seated onto the plastic base.
Step 2: Attach Base to Post
From underneath, attach the metal spacer, plastic base, base cover, and nameplate to the post using the provided bolts and lock washers.
? Note: One end of the post has threaded holes. The bolts will fit into these threads.
Diagram 2 illustrates the attachment of the base assembly to the post using bolts and lock washers, with a detail showing the threaded holes on the post.
Step 3: Position the Assembled Unit
Stand the assembled pieces upright, with the base resting on the ground.
Diagram 3 shows the assembled base and post standing vertically.
Step 4: Attach the First Arm
Slide an arm into one of the holes at the top of the post.
? Note: Before inserting the arm into the post, press the button located on the side of the arm.
Diagram 4 depicts sliding an arm into a top hole of the post, with a close-up highlighting the button on the arm that needs to be pressed.
Step 5: Attach the Second Arm
Repeat the process with the second arm in the remaining post.
