Blood Pressure Monitor User Guide
Easy to read >>> Large 4.3 inches screen display
Four Color Display (Optional)
The color display indicates the blood pressure level:
| Systolic Pressure (mmHg) | Diastolic Pressure (mmHg) | Color Display | Hierarchical Relationship |
|---|---|---|---|
| ≥160 | ≥100 | red | and (or) |
| 140-159 | 90-99 | orange | and (or) |
| 90-139 | 60-89 | green | and (or) |
| <90 | <60 | orange | and |
Note: Consult your doctor if unexpected readings are obtained.
Setting the Time
Follow these steps to set the year, month, date, and time:
- When the "year" flashes, press the [adjust button] to adjust to the desired year. Press the [confirm button] to confirm, and then the "month" will flash.
- Follow the same steps to adjust the "month", "date", and "time".
Diagram shows sequential steps for setting year, month, date, hour, and minute using buttons.
How to set "voice”? (Optional)
- After setting the time, the screen will display "SP ON".
- Press the [voice select button] to choose "SP ON" (speaker on) or "SP OFF" (speaker off).
- Press the [confirm button] to confirm.
Diagram shows the device screen displaying "SP ON" and buttons for selection and confirmation.
How to set "unit”?
The default unit is mmHg.
- In standby mode, keep pressing the [power/unit button] for about 10 seconds to enter the unit selection.
- Press the [unit switch button] to switch between mmHg/kPa. Press the [confirm button] to confirm the selection.
Diagram shows the device transitioning from standby mode to unit selection, then to mmHg and kPa options, with a confirmation step.
How to check memory data?
- In standby mode, press the [memory button] and the device will display the average value of the measurements for the first three times.
- Press the [memory button] again to check the 99 sets of memory values one by one.
How to take proper measurements?
① Sitting correctly
To take a measurement, you need to be relaxed and comfortably seated in a room with a comfortable temperature. Place your arm on the table.
- Sit in a comfortable chair with your back and arm supported.
- Keep your feet flat and your legs uncrossed.
- The arm cuff should be placed on your arm at the same level as your heart, with the arm resting comfortably on a table.
Diagram illustrates correct sitting posture, arm placement, and table height (25-30cm) for measurement.
② Applying the arm cuff
Take off the clothes on the arm.
- Connect the arm cuff to your monitor by inserting the air plug into the air jack securely.
- Place your hand through the cuff loop. Pull the cuff until it reaches your upper left arm. Ensure the bottom edge is 2 to 3 cm (0.79 to 1.18 inches) above the elbow.
Diagram shows connecting the cuff to the monitor and applying the cuff to the upper arm, indicating the correct position relative to the elbow.
③ Taking a measurement
Start measurement after wearing the cuff. Press the [power button] and the monitor will begin to inflate. Please do not move or talk during the measurement. (The voice version will automatically broadcast the measured result during the measurement process.)
Diagram shows the monitor displaying measurement progress with systolic, diastolic, and pulse readings, including average values.
Company Information
| 公司名称 (Company Name) | [Company Name] |
| 产品名称 (Product Name) | [Product Name] |
| 型号规格 (Model Specification) | 30C |
| 产品尺寸 (Product Size) | 21 |
| 材质 (Material) | 铜 (Copper) |
