Puig Motorcycle Windshield Mounting Instructions

Touring Traveller II Windshield

Mounting Instructions

Reference: 5267W

Parts List

Assembly Diagrams

Diagram 1 (Page 1): This diagram shows the overall assembly of the Touring Traveller II windshield. It depicts the windshield attached to the motorcycle's front section, including the headlight area, via various brackets, rods, and fasteners. Numbered callouts correspond to the parts listed above. A note advises: "Support the screen on the headlamp if possible."

Diagrams 2 & 3 (Page 2): These diagrams illustrate the step-by-step assembly process. Diagram 2 shows the initial mounting of brackets and supporting components to the motorcycle's handlebar and headlight assembly, detailing connection points and hardware. Diagram 3 shows the windshield itself being attached to these brackets using screws and nuts. A specific tightening torque is indicated: "4 Nm - Tightening torque".

Kawasaki Windshield Kits

Mounting Instructions

Kit for Rafale / Trend / Shark

Compatible Models: KAWASAKI ER-6N `12-'16 / Z650 `17-'19 / Z900 `17-'19 / Z1000 '14-'19

Reference: 10566

Assembly Information:

• ? 1 Person
• ⏱️ 15 min
• ✅ EASY
• Tools Required: Nº 3 N° 5 ALLEN, [Phillips Screwdriver]

Parts List

Assembly Diagrams

Diagram 1 (Page 3): This diagram displays the individual components included in the Kawasaki windshield kits, with numbered callouts corresponding to the parts list. It also indicates assembly time (15 minutes), number of people required (1), difficulty (EASY), and the necessary tools (Allen wrenches sizes 3 and 5, and a Phillips screwdriver).

Diagram 2 (Page 4): This diagram illustrates the complete assembly of the windshield kit onto a Kawasaki motorcycle. It shows the left and right supports (parts 1 and 2) being attached to the motorcycle's front fairing. The diagram details the placement of spacers (3), screws (4), washers (5), and nuts (6), as well as the coupling angle (7) and nut caps (8) in their final positions.

General Maintenance Advice

It is recommended during vehicle inspections to also check the tightness of all windshield screws, especially those securing it to the motorcycle. Thank you for your attention.

One unit of a 30x30x7mm microporous sticker is supplied. This sticker can be placed between the fairing and the motorcycle's instrument panel if necessary.

For assembly video availability, please consult our website for this reference.