Puig Mounting Instructions for BMW R1300GS / R1300GS Adventure '23- Touring Plus Screen

Step 1: Disassembly

Carefully remove the original motorcycle screen. The diagram indicates removal by a red upward arrow.

[Diagram shows the original screen being detached from the motorcycle]

Step 2: Initial Assembly

Position the new Puig Touring Plus Screen onto the motorcycle's mounting points. Secure the screen using the original screws (labeled 'A' in diagrams) and the provided nylon washers (labeled '2'). A detailed view illustrates the correct placement of the washer between the screen and the mounting bracket.

[Diagram shows the new screen being aligned and initially secured with screws and washers]

Step 3: Further Assembly

Continue the assembly process by fastening the screen more securely. Utilize the original screws (labeled 'A') and the thread caps (labeled '3') to cover and protect the screw heads and ensure a clean finish.

[Diagram shows additional screws and caps being applied to secure the screen]

Step 4: Final Assembly

Complete the installation by ensuring all components are firmly attached. Use the remaining original screws (labeled 'A') and thread caps (labeled '3').

Tightening Torque: Apply a specific tightening torque of 3 Nm to all fasteners for optimal security and to prevent damage.

[Diagram shows the final screen installation and highlights the torque specification]