1. Diagram
The Ninebot KickScooter is comprised of the following components:
- Handlebar
- Bell
- Brake Lever
- Headlight
- Quick-release lever
- Folding Mechanism
- Safety Hook
- Front Fork
- Front Fender
- Hub Motor
- Electric Throttle
- Dashboard & Power Button
- Snap Hook
- Stem
- Footboard
- Buckle
- Rear Fender
- Rear Light
- Disc Brake
- Battery Compartment
- Kickstand
- Charge Port
2. Dashboard & Power Button
Power Button: Press to turn on; press and hold for 3 seconds to turn off. When the KickScooter is on, press to toggle the headlight and rear light, and press twice to switch between speed modes.
Speedometer: Displays current speed and error codes. Units (metric/imperial) can be switched via the Segway-Ninebot app (Menu > Settings).
Speed Mode: Three modes are available:
| Mode | F25 | F30 / F30S | F40 |
|---|---|---|---|
| ECO (Energy-saving mode) | 9.3 mph (15 km/h) | 9.3 mph (15 km/h) | 9.3 mph (15 km/h) |
| D (Standard mode) | 15.5 mph (25 km/h) | 15.5 mph (25 km/h) | 18.6 mph (30 km/h) |
| S (Sport mode) | 15.5 mph (25 km/h) | 15.5 mph (25 km/h) | 18.6 mph (30 km/h) |
Error Notification: Indicates a detected error.
Temperature Warning: Activates if battery temperature is below 32°F (0°C) or above 131°F (55°C). The vehicle may not accelerate normally or charge during this warning. Do not use until the temperature returns to the normal range.
Bluetooth: Indicates successful connection to a mobile device.
Battery Level: Displays battery capacity with up to 5 bars. A red first bar signifies very low battery; charge immediately.
3. Specifications
Specifications for Ninebot KickScooter models:
| Item | Parameter | F25 | F30 | F30S | F40 |
|---|---|---|---|---|---|
| Product | Name | Ninebot KickScooter | |||
| Model | F25 | F30 | F30S | F40 | |
| Length × Width × Height | Approx. 45 × 18.9 × 45.7 in (1143 × 480 × 1160 mm) | Approx. 45 × 18.9 × 45.7 in (1143 × 480 × 1160 mm) | |||
| Folded: Length × Width × Height | Approx. 45 × 18.9 × 19.5 in (1143 × 480 × 495 mm) | Approx. 45 × 18.9 × 19.5 in (1143 × 480 × 495 mm) | |||
| Rider | Net Weight | Approx. 32.4 lbs (14.7 kg) | Approx. 33.3 lbs (15.1 kg) | Approx. 34.8 lbs (15.8 kg) | Approx. 34.8 lbs (15.8 kg) |
| Payload | 66–220 lbs (30–100 kg) | 66–265 lbs (30–120 kg) | |||
| Recommended Age | 14+ years | ||||
| Required Height | 3’11”–6’6” (120–200 cm) | ||||
| Machine | Max. Speed | Approx. 15.5 mph (25 km/h) | Approx. 15.5 mph (25 km/h) | Approx. 15.5 mph (25 km/h) | Approx. 18.6 mph (30 km/h) |
| Typical Range[1] | Approx. 12.4 miles (20 km) | Approx. 18.6 miles (30 km) | Approx. 24.9 miles (40 km) | Approx. 24.9 miles (40 km) | |
| Max. Slope | Approx. 12% | Approx. 15% | Approx. 15% | Approx. 20% | |
| Traversable Terrain | Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm) | ||||
| Operating Temperature | 14–104°F (-10–40°C) | ||||
| Storage Temperature | 14–122°F (-10–50°C) | ||||
| IP Rating | IPX5 | ||||
| Battery | Duration of Charging | Approx. 3.5 h | Approx. 5 h | Approx. 6.5 h | Approx. 6.5 h |
| Nominal Voltage | 36 V | ||||
| Max. Charging Voltage | 42 V | ||||
| Charging Temperature | 32–104°F (0–40°C) | ||||
| Nominal Capacity | 5100 mAh | 7650 mAh | 10200 mAh | 10200 mAh | |
| Nominal Energy | 183 Wh | 275 Wh | 367 Wh | 367 Wh | |
| Battery Management System | Over-heating, short circuit, over-current, over-discharge and over-charge protection | ||||
| Motor | Nominal Power | 0.3 kW, 300 W | 0.3 kW, 300 W | 0.3 kW, 300 W | 0.35 kW, 350 W |
| Output Power | 0.07 kW, 70 W | 0.07 kW, 70 W | 0.07 kW, 70 W | 0.07 kW, 70 W | |
| Charger | Input Voltage | 100–240 V~ | |||
| Max. Output Voltage | 42 V | ||||
| Rated Output | 41 V , 1.7 A | ||||
| Features | Brake Light | LED Rear Light | |||
| Riding Modes | Energy-saving mode, Standard mode and Sport mode | ||||
| Tire Pressure | 40–45 psi | ||||
| Tires | 10-inch pneumatic tires. | ||||
[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.
* Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.
4. Certifications
This product is certified to ANSI/CAN/UL-2272 by TUV Rheinland.
The battery complies with UN/DOT 38.3.
The battery complies with ANSI/CAN/UL-2271.
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
CAN ICES-3 (B)/NMB-3(B)
Cet équipement est conforme aux limites d'exposition aux radiations de la IC définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.
Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway Inc. or Ninebot. Such modifications could void the user's authority to operate the equipment.
Model: F25 / F30 / F30S / F40
FCC ID: 2ALS8-KS0005
IC: 22636-KS0005
Welcome to Segway ,Your Premier Choice for Personal Transportation
