DuraTech DT403027AU Multi-Function Screwdriver Set
Operator's Manual
Product Overview
This document provides operating instructions for the DuraTech DT403027AU Multi-Function Screwdriver Set. The set includes a multi-function screwdriver handle and two sets of screwdriver bits.
Included Components:
- Multi-function screwdriver handle (marked "4 IN 1")
- 6 pieces of 28mm S2 precision screwdriver bits
- 10 pieces of 25mm S2 screwdriver bits
Distributor: Hangzhou GreatStar Industrial Co., Ltd.
Operation Instructions
Follow these steps to use the multi-function screwdriver:
Step 1: Prepare the Shank
1. Pull the shank forward.
2. Rotate the shank 90 degrees [rotate-symbol] clockwise or counter-clockwise until it reaches the "T" position. This action releases the inside shank.
Step 2: Configure the Screwdriver
1. Pull the inside shank completely out of the main handle.
You can now configure the screwdriver in two ways:
- To create a T-Handle: Insert the end of the inner shank into the designated hole on the main handle. This forms a comfortable T-shaped grip for increased torque.
- To use as a Precision Screwdriver: The inner shank itself can be used as a slim, precise screwdriver, suitable for small screws.
