TCL MOVEAUDIO S150 TW10 Quick Start Guide

Product Information

Brand: TCL

Model: MOVEAUDIO S150 (TW10)

Manufacturer: TCL Communication Ltd.

FCC ID: 2ACCJB138

IC: 9238A-0105

HVIN: TW10

Part Number: CJB1WB103AAA

1. What's in the Box

• Charging Case & Earbuds
• USB cable
• Quick start guide

2. First Time Use

1. Take the earbuds out of the charging case. If the earbud indicators do not flash, place them back into the charging case and charge the case for at least 10 minutes.

2. Pairing:

   • On your phone or device, open Bluetooth settings.
   • Turn on Bluetooth.
   • Select "TCL MOVEAUDIO S150" from the list of available devices and connect.

   (Note: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TCL Communication Ltd. is under license.)

3. Auto Power On / Off

• Auto Power On: The earbuds automatically turn on when you take them out of the charging case.
• Auto Power Off: The earbuds automatically turn off when you place them back into the charging case.

4. Manual Power On / Off

Manual power on/off functions only work when the earbuds are NOT inside the charging case.

• Manual Power On: Press and hold the touch area on each earbud until you hear a power-on tone.
• Manual Power Off: Press and hold the touch area on each earbud until you hear a power-off tone.

5. Charging

Charge Earbuds

Place the earbuds into the charging case. The charging case LED will indicate the charging status.

(Description: Diagram shows earbuds placed in the charging case, with charging indicators illuminated.)

Charge Charging Case

Connect the included USB cable to the charging port on the case and to a power source (e.g., USB adapter, computer). The charging case LED will indicate the charging status.

(Description: Diagram shows a USB cable connected to the charging case's port and plugged into a power source.)

6. Touch Control

The touch controls are located on the earbuds. The following actions can be performed by tapping the touch area.

Left Earbud (L)

• Tap once: [play/pause] ▶️ / ⏸️
• Tap twice: [next track] ⏭️
• Tap three times: Activate voice assistant (Siri/Google) ?

Right Earbud (R)

• Tap once: [play/pause] ▶️ / ⏸️
• Tap twice: [previous track] ⏮️
• Tap three times: Activate voice assistant (Siri/Google) ?

Both Earbuds (L/R)

• Tap twice: [play/pause] ▶️ / ⏸️
• Tap three times: Activate voice assistant (Siri/Google) ?

7. LED Lights Indications

Earbuds LED

• Power on: [power on] (e.g., flashing blue)
• BT pairing mode: [pairing mode] (e.g., flashing blue/red)
• BT connected: [connected] (e.g., solid blue)
• Resetting: [resetting] (e.g., flashing red)
• Low battery: [low battery] ? (e.g., flashing red)

Charging Case LED

• Low battery: [low battery] ?
• Charging: [charging] ?
• Full charged: [fully charged] ✔️

8. Reset

To reset the earbuds to factory settings:

1. Place both earbuds into the charging case.
2. Close the charging case lid.
3. Press the button on the charging case [five times] (X5).
4. The LED on the charging case will flash to confirm the reset.

(Description: Diagram shows earbuds placed in the charging case, the lid closed, and the reset button being pressed multiple times.)

Important Safety and Regulatory Information

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.