OXBOX J4PH4024A1000AA 2.0 Ton Heat Pump Package Unit
Document Type: SUBMITTAL
Unit Overview and Dimensions
This document provides technical specifications and dimensional information for the OXBOX J4PH4024A1000AA 2.0 Ton Heat Pump Package Unit.
Dimensional Drawings:
Front View: The front of the unit features a large fan grille at the top. Below the fan, key connection points are identified:
- Hi/Lo pressure service ports: 1/4" SAE
- Condensate drain connection: 3/4" NPTI (Trap required)
- Electrical service access compartment panel
- Low voltage entrance: 7/8" Diameter
- High voltage connection: 1-3/8" Diameter
Bottom View: This view shows the base of the unit and indicates side supply air and side return air openings. Key dimensions are also provided.
Back View: The back view primarily shows the unit's depth and width, along with the fan grille.
Product Specifications
| Specification | Value |
|---|---|
| Model | J4PH4024A1000AA |
| Power Connections (V/PH/HZ) | 208/230/1/60 |
| Min. Branch Circuit Ampacity | 13.7 A |
| Branch Circuit Protection Rating (Max) | 20 A |
| Sound Power Level [dB(A)] | 72 |
| Compressor Type | Rotary |
| Number of Used Speeds | 1-1 |
| RL Amps - LR Amps | 8.45 - 34.8 A |
| Outdoor Fan Diameter (IN.) | 22 |
| Outdoor Fan Type Drive | Direct - 1 Speed |
| Outdoor Fan Motor HP | 1/12 |
| Outdoor Fan Motor Speed (RPM) | 1075 |
| Outdoor Fan Voltage (V/PH/HZ) | 208/230/1/60 |
| Outdoor Fan FL Amps | 0.68 A |
| Outdoor Coil Type | Plate Fin |
| Outdoor Coil Rows-FPI | 2.5 - 20 |
| Outdoor Coil Face Area (SQ. FT.) | 9.79 |
| Outdoor Coil Tube Size (IN.) | 9/32 |
| Indoor Fan Type | Centrifugal |
| Indoor Fan Drive | Direct - 3 Speeds |
| Indoor Fan Motor HP | 1/4 |
| Indoor Fan Motor Speed (RPM) | 1075 |
| Indoor Fan Voltage (V/PH/HZ) | 208/230/1/60 |
| Indoor Fan FL Amps | 2.46 A |
| Indoor Coil Type | Plate Fin |
| Indoor Coil Rows-FPI | 4 - 17 |
| Indoor Coil Face Area (SQ. FT.) | 3.63 |
| Indoor Coil Tube Size (IN.) | 9/32 |
| Refrigerant Control | Orifice |
| Refrigerant (LBS. - O.D. UNIT) | 5 LBS. - 1 OZ. (R-410) |
| Dimensions (W x H x D) | 52-3/8 x 25-7/8 x 38-5/8 |
| Weight (NET LBS.) | 326 |
| Shipping Weight (LBS.) | 333 |
Optional Heater Information
Auxiliary electric heaters are available as a field-installed option. The table below details the heater kits and their electrical requirements.
| Heater Kit Model Used | Electric Heat (kW) | Min. Circuit Ampacity | Max. Fuse or Breaker (HACR) Ampacity | ||
|---|---|---|---|---|---|
| 208V | 240V | 208V | 240V | ||
| JAYHTR1P05BKRA | 5 | 23 | 26 | 25 | 30 |
| JAYHTR1P08BKRA | 7.5 | 34 | 39 | 35 | 40 |
| JAYHTR1P10BKRA | 10 | 45 | 52 | 45 | 60 |
Fan Performance Table
Air Flow Performance data for the J4PH4024A1000AA unit across various external static pressures.
| Motor Speed | External Static Pressure - Inches W.C. (kPa) | |||||||
|---|---|---|---|---|---|---|---|---|
| 0(0) | 0.1(.02) | 0.2(.05) | 0.3(.07) | 0.4(.10) | 0.5(.12) | 0.6(.15) | 0.7(.17) | |
| Low | 756 CFM | 706 CFM | 654 CFM | 600 CFM | - | - | - | - |
| Medium | - | - | - | 842 CFM | 782 CFM | 718 CFM | 625 CFM | - |
| High | - | - | - | - | 889 CFM | 805 CFM | 693 CFM | - |
Features
- 2-5 ton capacities available
- High-efficiency 14 SEER ratings
- Architectural, anti-rust steel cabinets, tested to withstand 1,000-hour salt spray
- Quiet horizontal discharge
- High-efficiency compressors operate smoothly, quietly, consistently
- Auxiliary electric heaters available as a field installed option: 5kW, 8kW, 10kW, 15kW, 20kW (available heater sizes vary depending on model tonnage)
- Suitable for Manufactured/Mobile Home Use
Certifications and Manufacturer Information
The unit is AHRI Certified for Unitary Small AC and Unitary Small HP, and Intertek Listed (cULus). The manufacturer maintains a policy of continuous product and product data improvement and reserves the right to change design and specification without notice.
