BÄCKNATE Pendant Lamp Shade

Parts List

Before you begin, identify all the components:

• Three (3x) identical large, curved, petal-like components.
• One (1x) central triangular component with a central hole and mounting points.
• Three types of small cylindrical caps/feet. For each type, there are 6 pieces plus 1 spare (6x+1).

Assembly Steps

Step 1

Connect the main components to form the base structure.

Take three (3x) of the large petal-like components. Insert two small pins into the designated holes on two of these components (2x). Connect the components by aligning the holes and pins, with arrows indicating a twisting or locking motion to join them together.

Step 2

Attach initial caps and prepare for hanging.

Take three (3x) of the first type of cylindrical cap/foot and three (3x) of the second type. Attach these caps to the corresponding points on the structure assembled in Step 1. A close-up shows a component being pressed until it "Click!".

Steps 3 & 4

Attach the central component to the hanging cord.

Take the central triangular component. Align it with a hanging cord or fixture. Arrows indicate rotating the component onto the cord.

Step 5

Attach the second set of caps.

Take six (6x) of the third type of cylindrical cap/foot. Attach these caps to the designated points on the main structure. A close-up shows a cap being inserted into a hole, with an arrow indicating downward pressure, and a "Click!" sound indicator.

Step 6

Attach the final set of caps.

Take three (3x) of the first type of cylindrical cap/foot and three (3x) of the second type. Attach these caps to the remaining designated points on the structure. A close-up shows a cap being pressed into place until it "Click!".

Final Assembly

The BÄCKNATE pendant lamp shade is now assembled and ready for installation.

Illustration of the fully assembled BÄCKNATE pendant lamp shade, showing its unique, layered, petal-like design.