BÄCKNATE

Important Safety Information

If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. If you are uncertain, please contact IKEA.

Parts Included

• Main shade components
• Base cylinder
• Electrical cord with socket
• Base plate
• Mounting bracket
• Fasteners (screws, rings)
• Quantities indicated: 1x+1, 1x+1, 2x+1

Assembly Instructions

Step 1: Prepare the Shade Fabric

A hand is shown threading the electrical cord through a designated loop on the fabric piece that will form the lampshade. The cord passes through a small opening.

Step 2: Shape the Lampshade

The fabric piece is being folded and creased to form the characteristic shape of the BÄCKNATE lampshade. Arrows indicate the folding direction.

Step 3: Insert Cable into Base

The electrical cord is fed into the cylindrical base of the lamp. An informational icon [info] is displayed next to a diagram showing the correct orientation for the cable entry into the base. A separate diagram, marked with a prohibition symbol [do not], illustrates an incorrect method.

Step 4: Attach Base Mounting Bracket

The base plate is shown. A mounting bracket is being attached to it using small screws. An informational icon [info] indicates that one screw (1x) is used for this attachment.

Step 5: Connect Shade to Base

The assembled lampshade structure is being connected to the base plate assembly. Arrows show the parts aligning and connecting. Close-up views detail how screws are inserted through holes to secure the components.

Step 6: Secure Lampshade Structure

The main lampshade structure is being firmly attached to the base assembly. A close-up view shows a component being pushed into place until it clicks, indicating a secure connection.

Step 7: Insert Lamp Holder

The lamp holder (socket) is being inserted into the top central part of the assembled lampshade structure. Arrows indicate a downward motion. Close-up views show a ring being fitted and secured around the lamp holder.

Step 8: Secure Lamp Holder

The lamp holder is being secured in place. A hand is shown inserting a screw (1x) through a hole to fasten it. An informational icon [info] highlights this step.

Step 9: Attach Shade to Lamp Holder

The main lampshade structure is being attached to the lamp holder assembly. Arrows show the shade being lowered onto the holder and rotated to connect securely.

Step 10: Install Light Bulb

A light bulb is shown being screwed into the lamp holder. The lampshade is being positioned over the bulb. Arrows indicate the downward movement of the shade and the bulb insertion.

Step 11: Final Shade Adjustment

The lampshade is being adjusted for its final shape and position. Arrows indicate gentle pushing and pulling movements on the shade panels. The electrical cord is also shown being adjusted for neatness.

For more information, visit: https://m.qr.ikea.com/m/backnate-h5D7p7