RshPets Vertical Cat Climbing System "Snake"
Assembly Instructions
Product Overview & Care
Attention: For cats only. Use by children is strictly prohibited!
Wood Care Instructions: Clean with a soft, slightly damp cloth. Avoid harsh chemicals, bleach, or abrasive cleaners, as they may damage the eco-oil finish. Do not expose to excessive moisture. To maintain the natural look, you may occasionally reapply wood oil.
Warranty and Return: 2 years warranty and 30 days return. More information on the RshPets website.
Material: Shelf - plywood, sisal rope, carpet - 100% polypropylene.
Specifications:
- Maximum load capacity: approximately 15 kg (33 lbs).
- Total width: 73 cm (28.7 inches).
- Total height: 110 cm (43.3 inches).
Assembly Parts
The following parts are included in the kit:
- Part 001: x5
- Part 002: x10
- Part 003: x10
- Part 004: x1
- Part 005: x4
- Part 006: x1
- Part 007: x1
- Part 008: x1
- Cushion: 1 pc.
Note: Parts for installation (screws, wall plugs) are not included but are necessary for assembly.
Assembly Steps
Step 1: Attaching Shelves
Insert part 001 into the designated holes and screw securely.
Step 2: Assembling the Main Structure
Follow the diagram to connect parts A, B, C, D, E, F, G, and H using the provided screws and components.
Step 3: Securing to the Wall
For Brick, Concrete, Stone Walls:
- Insert part 001 into the hole.
- Screw securely.
For Plasterboard Walls (12-16mm thickness):
- Insert part 001 into the hole.
- Screw securely.
Important: Always ensure the product is securely attached to the wall. This is crucial for safety!
Step 4: Final Assembly
Continue assembling the remaining parts (002, 004, 005, 007) as shown in the diagram, ensuring all connections are secure.
Insert parts into holes and screw securely.
Important Safety Information
Attention: This product is not designed for heavy loads! Never lean on the structure! Risk of injury!
Placement Recommendations: Avoid placing the cat climbing system near heat sources or in areas with high humidity.
