RshPets Vertical Cat Scratching Pole
Model: 1PC
Product Overview
This document provides assembly instructions and care recommendations for the RshPets Vertical Cat Scratching Pole. The product is designed for cats and is made from plywood and sisal rope.
Specifications:
- Length: 33 cm (13.7 inches)
- Maximum load capacity: approximately 15 kg (33 lbs)
Important Safety Information:
This product is intended for cats only. Use by children is strictly prohibited. Regularly check the product for damage and ensure it is securely attached to the wall. Replace the product if it is faulty or missing parts to prevent potential injury to the animal.
Care Recommendations
Wood Care Instructions: Clean with a soft, slightly damp cloth. Avoid harsh chemicals, bleach, or abrasive cleaners, as they may damage the eco-oil finish. Do not expose to excessive moisture. To maintain the natural look, you may occasionally reapply wood oil.
Assembly Instructions
Assembly Parts Included:
- Part 001 (x2)
- Part 002 (x4)
- Part 003 (x4)
- Part 004 (x1)
- Part 005 (x1)
- Part 006 (x1)
Tools (Not Included, but needed for installation):
- Drill with an 8.0 mm (0.3150 inch) drill bit
Step 1: Insert into hole.
Step 2: Screw securely.
Step 3: Insert into hole and screw securely.
Wall Mounting:
- For brick, concrete, or stone walls.
- For plasterboard walls (12-16mm or 0.47-0.63 inches thick). Ensure a minimum depth of 50mm (1.97 inches) for secure mounting.
Important Note: This product is not designed for heavy loads. Never lean on the product. Risk of injury! Recommendations for placement: do not place above heat sources or in areas with high humidity.
Warranty and Return
This product comes with a 2-year warranty and a 30-day return policy. For more information, please visit the RshPets website.
Producer Contact Information
RshPets Ltd.
ul. Maria Curie Skłodowska 3/27
20-029 Lublin
Poland
Email: rshpets.office@gmail.com
Website: rshpets.com
Facebook: facebook.com/rshpetscom
Instagram: instagram.com/rshpets/
YouTube: youtube.com/@rshpetscompany