Instruction Manual MPPlay

1 - Basic Care

• Never remove housing covers or modify the product in any way. This may cause electric shock or damage which would void the warranty.
• Immediately disconnect the unit if you notice any smoke emitting from inside, a burning smell or if the unit makes strange noises and contact ZZ-2 tech support.
• Do not allow the unit to come in contact with liquids. Liquid in the housing may cause a fire, electric shock or damage to the device. Immediately remove power from the unit if an object or liquid falls into it.
• The product warranty does not cover damage caused by drops, liquids or misuse. The warranty only covers manufacturer defects.

2 - Characteristics

• TFT digital touchscreen
• USB 2.0 Input
• USB-C Input
• 1080P Video Format
• Supported Audio Formats: MP3/FLAC/OGG/APE, etc.
• Supported Video Formats: RM/RMVB/VOB/DAT/MP4/FLV/MOV/3GP/AVI/MPG, etc.
• FM Tuner Bands: 87.5 MHz - 108.0 MHz
• Remote Control
• Auto power-off with memory function in radio or TF/USB mode
• Equalizer/Clock/Mute function
• Bluetooth Streaming Functionality
• AUX / Microphone connection input
• Rear View Camera input (1)
• Steering Wheel Control Input
• 1 video input / 2 video outputs / 2 audio outputs
• Screen Mirroring for Android and iPhone
• CarPlay function for iPhone
• Android Auto function for Android

3 - Kit Content

The kit includes:

• 1 - MP-Play Single-DIN radio
• 2 - Radio sleeve
• 3 - Microphone
• 4 - Remote Control
• 5 - High-level audio outputs
• 6 - Power harness

4 - Inputs/Outputs/Controls

Front Panel:

• 1 - Power / Mute / Vol + / Vol - knob
• 2 - Internal Mic (built-in mic)
• 3 - USB input for charging
• 4 - USB input for CarPlay / Android Auto
• 5 - USB-C for media playback and CarPlay / Android Auto connection

Rear Panel:

• 6 - Harness connection (audio)
• 7 - Harness connection (power)
• 8 - RCA Audio output LEFT
• 9 - Video Output (1) RCA
• 10 - Video Input RCA
• 11 - External Microphone Input
• 12 - RCA Audio output RIGHT
• 13 - Video Output (2) RCA
• 14 - Rear Camera Input
• 15 - External Antenna connector

5 - Installation

8 Way Audio Harness Connections:

• Purple wire: RIGHT REAR (+)
• Purple/Black wire: RIGHT REAR (-)
• Gray wire: RIGHT FRONT (+)
• Gray/Black wire: RIGHT FRONT (-)
• White wire: LEFT FRONT (+)
• White/Black wire: LEFT FRONT (-)
• Green wire: LEFT REAR (+)
• Green/Black wire: LEFT REAR (-)

8 Way Power Harness Connections:

• Pink wire: REV TRIGGER INPUT (+)
• Brown wire: SWC INPUT
• Blue wire: REM OUT (+)
• Red wire: ACC 12v (+)
• Orange wire: PRK BRAKE (-)
• Yellow wire: 12v (+) CONSTANT
• Green wire: DIMMER (+) INPUT
• Black wire: GROUND (-)

To program steering wheel controls, connect the steering wheel control wires, press the desired button on the steering wheel, then touch the corresponding function on the screen. Repeat this step until all commands have been programmed, then tap 'confirm'.

6 - Main Menu

The main menu provides access to various functions:

• 1 - Radio tuner function
• 2 - Bluetooth function (telephony)
• 3 - CarPlay function
• 4 - Android Auto function
• 5 - USB IOS media
• 6 - Mirroring function (iOS)
• 7 - Mirroring function (Android)
• 8 - Bluetooth music streaming
• 9 - Main Settings
• 10 - Input / Output configuration

7 - USB Media Playback

Controls for media playback:

• 1 - Return to previous screen
• 2 - Return to main menu
• 3 - Repeat Track
• 4 - Enable random playback
• 5 - Last track
• 6 - Play / Pause
• 7 - Next track
• 8 - Audio settings
• 9 - File browser

8 - Bluetooth Connection

Manage Bluetooth connections:

• 1 - Access Dial Pad
• 2 - Access Contact List
• 3 - Access Recent Call List
• 4 - Access Bluetooth Audio player
• 5 - Tap to connect a smartphone via Bluetooth
• 6 - Tap to disconnect smartphone
• 7 - Bluetooth Device name (MPPLAY)
• 8 - Device PIN (0000)

9 - CarPlay / Android Auto Connection

CarPlay Connection:

• Wired Connection: Connect your iPhone to the radio via a high-quality USB cable.
• Wireless Connection: Ensure Wi-Fi is enabled on your phone. Connect to the radio via Bluetooth. The Wi-Fi connection for CarPlay should establish automatically.

Android Auto Connection:

• Wired Connection: Connect your Android phone to the radio via a USB cable.
• Wireless Connection: Ensure Wi-Fi is enabled on your phone. Connect to the radio via Bluetooth. The Wi-Fi connection for Android Auto should establish automatically. A confirmation message may appear; tap 'Connect'. If Android Auto does not start automatically, navigate to 'Linked Phone > Android Auto' from the main menu.

10 - Smartphone Mirroring

iPhone Mirroring:

• Connect the iPhone to the lower USB port on the radio using a USB cable. On the iPhone, tap 'Trust' when prompted. Unlock your phone, and mirroring should begin automatically.
• Wireless Phone AirPlay: Please use your phone to search the device Wi-Fi named 'DIRECT-phonelink-c00ce9' and connect to it with password '88888888'. Select 'Car-AirPlay' in Screen Mirroring from your Phone.

Android Mirroring:

• Connect the USB cable to your Android phone. On the first access, you may be prompted to install and configure a mirroring application. Follow the on-screen instructions to download and install the recommended application. After installation, open the app, locate and activate the 'Mirroring' app. Disconnect and reconnect the USB cable. Check the option to 'Always open the mirroring app when mirroring suite is connected'. Tap 'Start now' to mirror your phone.
• AutoLink Pro: Download and install the AutoLink Pro app from your phone's app store or scan the QR code for MirrorLink. For wired connection, use the data cable and confirm authorization. For wireless projection, enter the AutoLink Pro application, select the wireless search device, click Connect, and confirm authorization.

11 - Video Input

To access video input, tap 'AV-IN' from the main menu.

12 - Configurations

12.1 - General Settings

• 1 - Screen and color adjustments
• 2 - Sound and Equalizer adjustments
• 3 - Date and Time configuration
• 4 - Steering Wheel Configuration
• 5 - Language settings
• 6 - Access mirroring settings
• 7 - USB Color customization
• 8 - Activate / deactivate rear camera sound
• 9 - Activate / deactivate rear camera function

12.2 - Screen and Color Configuration

• 1 - General Settings
• 2 - Sound and Equalizer adjustments
• 3 - Date and time configuration
• 4 - Configuration of Steering Wheel Controls
• 5 - Brightness adjustment
• 6 - Contrast adjustments
• 7 - Hue adjustment
• 8 - Saturation adjustment

WARRANTY PROCEDURES

All ZZ-2 products have a 1-year warranty. To ensure its validity:

1. Reach out to Tech Support: Contact ZZ-2 Tech Support via phone or WhatsApp, providing the invoice code and the product's serial number and part code. No replacement will be made without prior contact with Tech Support.
2. Technical Report: ZZ-2 Tech Support must verify the problem as an equipment malfunction. The product will not be replaced if the problem is caused by misuse, misinstallation, or accidental drops.
3. Replacement: A new unit will be sent via mail upon return of the malfunctioning product.
4. Forward Replacement: For urgent replacements, an invoice with the product's retail price will be issued, valid for 28 days. Upon return of the malfunctioning hardware within 28 days, the invoice will be cancelled. Otherwise, it must be paid normally.