Sanela SLWN 07 Stainless Steel Squatting Pan
Model: SLWN 07
Article No. (Code Nr.): 94070
About the Product
The Sanela SLWN 07 is a stainless steel squatting pan designed for floor installation. It is manufactured according to ISO 9001 standards.
Instructions for Use and Installation
General Safety Precautions:
- Before installation, it is essential to thoroughly familiarize yourself with the attached Safety Instructions.
- All stainless steel components should be cleaned only with water, soap, and a soft rag. It is strictly forbidden to use aggressive and abrasive cleansers. The use of Sanela product SLA 37 for cleaning is recommended.
- After unpacking the product, proceed with the packaging according to the law on packaging materials.
- The producer assures that this product has a declaration of conformity in accordance with regulations 73/23/EHS and 92/31/EHS.
Installation Steps:
The installation involves several steps, including preparing the site, connecting the water supply and waste, and securing the pan. Detailed diagrams illustrate the process:
- Site Preparation: Ensure the floor is prepared according to the technical drawing, including dimensions for the recess and waste pipe.
- Water Inlet and Waste Connection: Connect the water supply (G 1/2") and the waste pipe (Ø 100 mm).
- Mounting: Secure the squatting pan in the prepared recess.
- Finishing: The installation may involve tiling around the pan, with silicone sealant used for sealing.
Technical Drawing and Dimensions:
The document provides detailed technical drawings showing dimensions:
- Overall dimensions: 700 mm x 500 mm.
- Recess dimensions: Approximately 600 mm x 552 mm.
- Waste outlet diameter: Ø 100 mm.
- Water inlet: G 1/2".
Recommended Accessories
- SLA 27: Mounting set for connecting to automatic flushing unit SLW 01xx.
- SLW 01NK: Automatic toilet flushing unit for pressure water, 24 V DC.
- SLW 01P: Piezo toilet flushing unit for pressure water, 24 V DC.
- SLW 01PB: Piezo toilet flushing unit for pressure water, 6 V DC.
- SLW 01PA: Piezo toilet flushing unit for pressure water with special vandal-proof cover, 24 V DC.
Maintenance Instructions
Clean stainless steel parts with water, soap, and a soft cloth. Avoid aggressive and abrasive cleaning agents. Use Sanela product SLA 37 for cleaning.
Further Information
More information is available for download. Please refer to the provided QR codes or links.
