Business network solutions "engineered in Germany": LANCOM Systems GmbH
Instructions for LANCOM models including: O-360Q-5G, O-360Q-5G AirLancer Extender, AirLancer Extender, Extender
Antenna cables must not be shortened. Safety instructions. Parts of the antenna can be electrically conductive. Direct contact with power lines can result in.
1 giorno fa — Antenna cables must not be shortened. Safety instructions. Parts of the antenna can be electrically conductive. Direct contact with power lines can result in.
Lancom AirLancer O-360Q-5G ab € 273,41 (2025) | Preisvergleich Geizhals Deutschland
File Info : application/pdf, 5 Pages, 177.99KB
DocumentDocumentMounting Instructions LANCOM AirLancer O-360Q-5G Mounting Instructions LANCOM AirLancer O-360Q-5G General notes The AirLancer O-360Q-5G comes with materials for wall and pole mounting. The antenna must be installed so that the antenna outputs point downwards. The antenna has SMA connectors to which LANCOM indoor mobile routers can be connected. These screw connections should not be exposed to the weather. When mounting the antenna, any interference from WLAN transmitters located in the direct neighborhood must be ruled out. Wall mounting First attach the antenna bracket to the antenna housing as shown, using the 4 shorter screws supplied, the ³ spring washers , and washers provided. Note that the spring washers are located directly under the screw heads. Next, screw the connection arm hand-tight to the antenna mount · ´ º ¾ ² using one of the supplied longer screws as well as a spring washer , a washer , and a nut . »¿ µ ¸ ¹ Now attach the mounting plate as ² illustrated with suitable screws 10 *, washers 11 *, and, if necessary, ¶ dowels 12 * (depending on the wall material) to a sufficiently load- bearing wall. Then screw the antenna with the already mounted connection arm hand-tight to the mounting plate . For this purpose, use one of the supplied longer screws , a spring washer , a washer , and a nut . Again, make sure that the spring washer is positioned directly under the screw head. The antenna can now be aligned horizontally to the right / left and in the vertical tilt. Finally, tighten the nuts to a suitable torque and check all other connections for sufficient tightness. * not included in delivery Mounting instructions LANCOM AirLancer O-360Q-5G Mast mounting First attach the antenna bracket to the antenna ³ housing as shown, using the 4 shorter screws supplied, the spring washers , and washers provided. Note that the spring washers are located · ´ º ¾ directly under the screw heads. Next, screw the connection ² arm hand-tight to the antenna mount using one of the »¿ supplied longer screws 5 as well as a spring washer , a washer , µ and a nut . Now fasten the mounting plate ² to a sufficiently load-bearing mast with the enclosed mast clamps 10 ¶ as shown. Then screw the antenna with the already mounted connection arm hand-tight to the mounting plate . For this purpose, use one of the supplied longer screws , a spring washer , a washer , and a nut . Again, make sure that the spring washer is positioned directly under the screw head. The antenna can now be aligned horizontally to the right / left and in the vertical tilt. Finally, tighten the nuts to a suitable torque and check all other connections for sufficient tightness. Scope of delivery of the mounting kit for wall and mast mounting 1 Antenna bracket 1 Connection arm 1 Mounting plate for wall / mast mounting 2 Hexagonal screws M5 / 20 mm 4 Hexagonal screws M5 / 12 mm 2 Nuts M5 6 Spring washers M5 6 Washers M5 2 Mast clamps 10 Mounting Instructions LANCOM AirLancer O-360Q-5G Important information Electrical and Electronic Equipment Act Please do not throw electrical and electronic scrap into the household waste, it cannot be recycled there. Make sure that your electrical and electronic waste is disposed of in accordance with the currently valid guidelines of your country. Correct handling of antenna cables Antenna cables are sensitive HF cables. When laying them, it is therefore important to ensure that the cables are not kinked and that they are bent as little as possible, otherwise the performance of the antenna may be impaired. Likewise, the antenna cables should not be wound too tightly. Antenna cables must not be shortened. Safety instructions Parts of the antenna can be electrically conductive. Direct contact with power lines can result in serious injury or even death. The antenna and also a mounting mast must not be installed in the immediate vicinity of a power line. If the antenna has been mounted in a raised and/or exposed position, or if there is a risk of lightning strike, make sure that the antenna is mounted by a professional company and that it is properly grounded according to current standards. Mounting Instructions LANCOM AirLancer O-360Q-5G Technical data Number of integrated antennas Frequency range Supported bands 4 (MIMO system) 617-960 MHz / 1,166-1,610 MHz / 1,710-3,800 MHz / 4,200-5,000 MHz 3G / 4G / 5G Antenna characteristics Radiation characteristics VSWR Gain (without cable loss) Correlation coefficient Isolation Max. input power Impedance Omnidirectional radiator < 2.0:1 617 - 960 MHz 1,116 - 1,610 MHz 1,710 - 3,800 MHz 4,200 - 5,000 MHz < 0.5 > 20 dB 20 watts 50 0.5 dBi -2.2 dBi 1.7 dBi -1.8 dBi Mechanical data Size Weight Operating temperature Color Material Intrusion protection Mounting options Cables, connectors 233.7 x 183.7 mm (height x width) 1.000 g -40 °C to +85 °C White UV-resistant plastics IP65 Wall mount, mast mount Connectors: 4 x SMA (m) Product Warranty Item number Scope of delivery 2 years for AirLancer and accessories 61234 Antenna, mounting material for wall and mast mounting, mounting instructions LANCOM Systems GmbH A Rohde & Schwarz Company Adenauerstr. 20/B2 52146 Wuerselen | Germany info@lancom.de | lancom-systems.com LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and/or omissions. 111996 03/2025