INSTRUCTIONS

How to connect APP?

Please note that the following conditions need to be met before connecting:

• The IOS mobile phone system must not be lower than version 7.1, and must support Bluetooth BLE 4.2. iPhone 4S or above mobile phones.
• The Android system is required to be version 4.3 or above, and it needs to support Bluetooth BLE 4.2.
• The wireless transmitter in the device only records the user's data and sends it to the mobile APP when it is connected to the mobile phone. Before starting the sports equipment, please connect the application to the equipment to ensure that the data recorded in the mobile application is true and valid.
• When the transmitter does not receive any signal for 4 minutes, it will enter sleep mode. In sleep mode, the mobile phone will not be able to search for the transmitter. At this time, you need to use the device to wake up the Bluetooth transmitter.

Description of “KINOMAP" connection

Tips: Since the KINOMAP official software connection steps will be updated in real-time, this connection process is only for reference.

1.1 Search "KINOMAP" in mobile app store to download app.

Description of App Store Screen: Shows the Kinomap app with a 'K' logo, a rating of 3.5 stars based on 22 ratings, and an age restriction of '4+'.

E-mail: feierdun01@sina.com

1.2 After the download is completed, open the app and register the personal information. Turn on the Bluetooth of the mobile phone to ensure that the transmitter is powered on and in the wake-up state.

1.3 Add sports equipment as follows:

Description of App Screens for Adding Equipment:

Screen 1: Main Kinomap interface with options like 'Subscribe now', 'EQUIPMENT', 'Equipment Management', 'Remote display'. A red circle highlights the '+' button in the top right corner to add new equipment. Text explains to 'Create your configurations, combining the actual fitness equipment you are using and their compatible sensors'.

Screen 2: 'My equipment' screen, prompting to 'Select the machine type that you are going to use:'.

Screen 3: List of compatible equipment brands and models, including 'FitEngine', 'FITIFITO', 'FITNORD', 'FitShow', 'FLOWFITNESS', 'FORCE', 'OFTMS', 'FTMS', 'Fuel Fitness', 'GENIS', 'GYMSTICK™', 'HAMMER', 'HEALTHCARE INTERNATIONAL', 'HEAD'.

Screen 4: 'My crosstrainer' screen, showing 'OFTMS' and 'Elliptical'. Under 'INTERACTIVE', 'Bluetooth Smart 4.0' is listed.

Screen 5: 'My crosstrainer' screen, showing 'OFTMS' and 'Elliptical'. Under 'FOUND EQUIPMENT', 'FTMS' is listed with its Bluetooth identifier: 'Bluetooth Smart 4.0 (9AF18EBD-C032-C9CD-7B4F-581A7C9346F6)'.

1.4 Add equipment to complete, start your exercise!

Description of App Screen for Machine Details: A 'My crosstrainer' screen prompts 'You have connected your machine by choosing a generic brand and we would like to know more about the material you have for a better compatibility. Can you tell us the brand and model of your machine?'. Options 'Cancel' and 'Ok' are shown. The selected equipment is 'OFTMS Elliptical'.

Description of Final Equipment Screen: Shows 'FTMS Elliptical' as 'Current equipment'. The 'Settings' section lists 'Name', 'Brand' (FEIERDUN), 'Model' (FTMS Elliptical), 'Serial', 'Technology' (Bluetooth Smart 4.0), and 'Additional sensor' (Heart rate).

Product Model: Feier-EM-01

How to get a good after-sales service?

Thank you very much for choosing FEIERDUN products. We will do our best to serve you. If you encounter any problems during installation or use, please contact our after-sales team at first!

E-mail: feierdun01@sina.com

How is the control center used?

1. Item Description:

2. Display Description:

Overview

Description of Overview Display: Shows 24 effect lights on the outer ring. Heart rate can be shown in 'bpm'. Resistance can be shown in 'LEVEL' from 1 to 32. 'Speed', 'Time', 'Distance', and 'Calories' can be shown. Bluetooth connection status can be displayed.

SCAN mode

Description of SCAN Mode Display: All data is shown in rotation and switched every 3s. 'HEART RATE' & 'LEVEL' are shown in a little window. 'Speed', 'Time', 'Distance', 'Calories' are shown in the main window. Bluetooth LED lights up if connected, OFF if disconnected.

LOCK mode

Description of LOCK Mode Display: 24 effect LEDs light up during "MOTION" state. Press the knob to switch the display mode and lock the data you want to see. One of 'Speed' / 'Time' / 'Distance' / 'Calories' is shown in the main window. 'HEART RATE' & 'LEVEL' are shown in a little window. 24 effect LEDs light up during "MOTION" state.

E01 Error

Description of E01 Error Display: When the display appears E01 error, this is due to poor contact with the junction port. You need to disconnect the power supply, and re-dock the console's junction port. After connecting the power supply, adjust the middle of the block to see if it is normal to show. If you still can't deal with the problem, please contact us at the first time; we will provide parts replacement service.

3. Main Operation Instructions:

Sleep/Wake

Description of Sleep/Wake: In “SLEEP” state, the display is off. The knob can wake up the device by pressing or riding.

Press Knob

Description of Press Knob Operation: If there is no operation or riding, the knob will sleep after 3 minutes. In sleep state, a short press wakes up the knob. In awake state, a short press enters "MOTION" state. In motion state, a short press switches items. In motion state, a long press of 2s enters “READY" state. The BUZZER beeps every press.

Rotate Knob

Description of Rotate Knob Operation: Rotate clockwise to increase resistance. Rotate counterclockwise to reduce resistance. The BUZZER beeps every rotation.

4. Detailed Operation Instructions:

READY State:

After energizing, the BUZZER beeps, and the knob lights up and enters the “READY" state (Figure 1). After power-on, the resistance level automatically resets to "1". If there is no operation for 3 minutes, the display turns off and enters standby state (Figure 2).

MOTION State:

In “READY” state, riding or a short press enters “MOTION” state. “HEART RATE” and “LEVEL” switch every 3s (Figure 3, Figure 4), if “HEART RATE” is supported. Otherwise, only “LEVEL” lights up.

SCAN Mode Operation:

"Speed" & "Time" & "Distance" & "Calories" are shown in the main window in default “SCAN” mode. “SCAN” lights up, and the data switches every 3s (Figure 5, Figure 6, Figure 7, Figure 8).

LOCK Mode Operation:

A short press enters “LOCK" mode, and “SCAN” is off. The locked data can be: "Speed"/"Time"/"Distance"/"Calories" (Figure 9, Figure 10, Figure 11, Figure 12).