Soundcore AeroClip True Wireless Earbuds

Overview

The earbuds and charging case feature several key components:

1. LED Indicator: Displays charging and pairing status.
2. C-Bridge with Touch Control Area: The touch control area covers the entire C-bridge for easy interaction.
3. Sound Outlet: Where the audio is emitted.
4. USB-C Charging Port: For charging the case.
5. Charging Case Button: Used for pairing and reset functions.

Wearing the Earbuds

To wear the earbuds:

1. Place the earbuds into the narrowest point of your ear's outer rim.
2. Adjust for optimal audio performance while listening.

Medium and large ear tips are included in the package. If the earbuds feel loose, try the different ear tips for a more stable fit.

Powering On & Pairing

Automatic Pairing:

1. Remove the protective films from the earbuds.
2. Return the earbuds to the charging case and close the case.
3. Re-open the case to turn on the earbuds and enter pairing mode.
4. Select 'soundcore AeroClip' from your device's Bluetooth list to connect.

During pairing, the LED indicator will flash white. After successful pairing, the LED indicator will stay lit for 2 seconds and then turn off.

Manual Pairing:

To manually enter Bluetooth pairing mode:

1. Return the earbuds to the charging case and keep the case open.
2. Press and hold the button on the charging case for 3 seconds until the LED indicator flashes white rapidly.
3. The earbuds will enter pairing mode. Proceed with pairing to your device.

Charging

1. Place the earbuds in the charging case and close it. Ensure the earbuds and USB-C charging port are completely dry before charging.
2. Connect the charging case to a power source using the included USB-C cable.

Fully charging the charging case battery takes approximately 2 hours. 10 minutes of charging provides about 3 hours of playback time.

LED Status During Charging:

• When the charging case is connected to power, the LED indicator shows the charging status.
• When both earbuds are out of the case, pressing the case button checks the case's battery status: ? ≤20% (flashes for 2s), ? >20% (flashes for 2s).
• When any earbud is in the case, pressing the case button checks the individual earbud's battery level: ? ≤20% (flashes for 2s), ? >20% (flashes for 2s).
• When both earbuds are in the case, the LED shows the battery level of the earbud with lower power.

Dual Connections

To connect your earbuds to two Bluetooth devices simultaneously, use one of these methods:

1. Method 1: Manual Pairing with the Second Device
   Place the earbuds in the charging case and keep the case open. Press and hold the charging case button for 3 seconds until the LED indicator flashes white rapidly. This enters pairing mode for the second device.
2. Method 2: Use the Soundcore App
   In the Soundcore app, tap the gear icon ⚙️ in the upper right corner to access Settings. Select Dual Connections > Enable Dual Connections > Connect New Device. The dual connection feature is enabled by default.

Controls

Customize touch controls via the Soundcore app. Touch is supported on all areas, but the blue marked area is recommended for stability.

• Play / Pause Audio: Double tap (L/R) ▶️/⏸️
• Next Song: Triple tap (L/R) ⏭️
• Answer / End Call: Double tap (L/R) ?
• Reject Call: Double press (L/R) ?

Turning Off

To turn off the earbuds, return them to the charging case and close the case.

Reset

Reset your earbuds if they experience functionality issues:

1. Return the earbuds to the charging case and leave the case open.
2. Press and hold the button on the charging case for 10 seconds until the LED indicator flashes red slowly three times, indicating a successful reset.

Firmware Update

You will be notified when a new firmware version is available when the earbuds are connected to the app. Ensure the earbuds are in the charging case and the case remains open until the firmware update is complete. Do not use the earbuds during the update.

Specifications

Customer Support

For support, please contact us via the following:

• Email: service@soundcore.com
• Email (Middle East and Africa Only): support.mea@soundcore.com
• Email (Japan): support@anker.com
• Email (Korea): support.kr@anker.com
• Phone (USA/Canada): +1 (800) 988 7973
• Phone (United Kingdom): +44 (0) 1604 936200
• Phone (Germany): +49 (0) 69 9579 7960
• Phone (Japan): 03 4455 7823
• Phone (China): +86 400 0550 036
• Phone (Korea): +82 1666-8470
• Phone (UAE): +971 8000320817
• Phone (KSA): +966 8008500030
• Phone (Kuwait): +965 22069086
• Phone (Egypt): +20 8000000826
• Phone (Turkey): +90 (850) 460 14 14
• Phone (Russia): +8 (800) 511-86-23
• Phone (India): 000-8000-504-414