ROCCAT Syn Buds Air

Customize Your Experience

Download the companion mobile app to customize the Syn Buds Air to your liking. Adjust and create EQ settings, remap touch-enabled functions, and update firmware as needed without needing a wired connection.

Available for:

• iOS [QR code for iOS app download]
• Android [QR code for Android app download]

Package Contains

• ROCCAT Syn Buds Air Charging Case
• ROCCAT Syn Buds Air Earbuds
• 1x USB-A to USB-C Charging Cable
• 3 Sets of Silicone Ear Tips

Controls and Indicators

Earbuds Controls

The left and right earbuds feature touch-enabled surfaces for control:

• Touch-enabled surface: Main control area.
• Pairing LED indication: Shows pairing status (see LED Legend).

Charging Case Controls

• Battery level/pairing indication: Displays battery status and pairing mode.
• USB-C Charging port: For charging the case and earbuds.

The Syn Buds Air offer up to 20 hours of total rechargeable battery life. Ensure regular charging before storage.

Connecting Your Syn Buds Air

To connect to your smartphone, Windows PC, or other Bluetooth devices:

1. Turn on Bluetooth® on your device.
2. Open the charging case with the earbuds inside to initiate pairing mode.
3. Select "Syn Buds Air" from your device's Bluetooth® list.

(Instructions also available in French, Spanish, Italian, German, and Chinese.)

LED Indications

Earbud LED

• Solid White: Pairing Successful (indicator fades after 5 seconds).
• Fast Blinking White: Pairing in progress.

Charging Case LED

• Solid White: Indicates battery level (3 LEDs = Full Battery, 2 LEDs = 50% Battery, 1 LED = Low Battery).

Earbud Functions

The touch-enabled surfaces respond to the following actions:

Changing Ear Tips

To change the earbud tips, pull firmly to remove the old tip. Choose the best fitting tip, align it with the earbud, and stretch it around the grill.

Setup on Nintendo Switch™

To connect Syn Buds Air to your Nintendo Switch™:

1. Ensure Syn Buds Air are not paired to another device.
2. Place earbuds in the case with the lid open to enter pairing mode, and keep close to the Nintendo Switch™.
3. On the Nintendo Switch HOME menu, navigate to: System Settings > Bluetooth® Audio > Pair Device.
4. Select "Syn Buds Air" from the menu to pair.
5. Confirm pairing when prompted.
6. Adjust volume using the Nintendo Switch's volume controls on the top of the console.

If Syn Buds Air are not detected, press "Y" to search again. If still not found, select "OK" and "Pair Device" again.

Regulatory Compliance

Local Restrictions: Radio products are designed for specific countries; ensure correct frequency and channel settings for your region. Refer to manufacturer's OEM Regulatory Guidance for details.

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: no harmful interference, and acceptance of received interference. FCC IDs: XGB-14102L & XGB-14102R. RF exposure limits are met for uncontrolled environments.

Canadian ICES Statements: Complies with Industry Canada's licence-exempt RSSs. Operation is subject to non-interference and acceptance of interference.

European Union & EFTA Compliance: Marked with CE symbol [CE certification mark], indicating compliance with EMC Directive (2014/30/EU). Meets safety, EMC, Radio, and SAR standards (e.g., EN 60950-1, EN 301489, EN 300328). RoHS, WEEE, REACH, and Battery directives are met.

Disposal: Do not dispose of with household waste. Recycle electronic equipment responsibly through designated collection points.

Warning: To prevent possible hearing damage, do not listen at high volume levels for long periods.

Manufacturer: VOYETRA TURTLE BEACH, INC., 44 SOUTH BROADWAY, 4TH FLOOR, WHITE PLAINS NY 10601, USA.

For a complete Declaration of Conformity, visit: http://www.turtlebeach.com/homologation