Outsunny 4m x 4m Party Tent

Introduction

Thank you for purchasing this Outsunny product. This manual provides essential instructions for the assembly, use, and care of your party tent. Please read all instructions carefully before beginning assembly.

This document is primarily in English. Other languages may be available in the original PDF.

Important Safety Information

For your safety and to ensure the longevity of the tent:

• Multi-person assembly is required.
• Take appropriate actions to protect the tent from heavy rain, wind, and snow, as these conditions can cause damage. If necessary, disassemble the tent and store it for later use.
• In snowy conditions, do not allow the thickness of snow on the roof to exceed 5cm. Snow should be cleared as soon as possible for your safety and to prevent structural damage.

Customer Support & Contact Information

If you have any questions or require assistance, please contact our customer care center. Our contact details are as follows:

Recycling Information: Please dispose of this product responsibly. Look for recycling options in your area. ♻️ (Textual representation of recycling symbols and options: "Give or Recycle", "Association", "Delivery", "Waste Disposal").

Parts List & Packing Details

The tent is packed in two boxes. Please check all parts against the list below.

Box 1/2 Contents:

Box 2/2 Contents:

Visual Parts Overview: Diagrams show individual parts labeled with their part number and quantity. For example, Part 1 is shown with a quantity of x6, Part A with x4, Part B with x2, Part C with x2, Part D with x1, Part G with x6, Part P with x1, Part Q with x2, and Part R with x2. Hardware includes H (x12), J (x4), K (x96), M (x6, M6*45), and S (x4).

Assembly Instructions

Follow these steps carefully to assemble your Outsunny tent.

Step 1: Initial Frame Assembly

This step involves connecting several frame components to form the base structure. The diagram shows poles labeled 'A', 'B', 'C', and 'D' being joined. Magnified views (?) illustrate specific connections: Part 'C' connects to poles labeled '1' and '3'. Part 'D' connects to poles labeled '1' and '3'. The main diagram shows these components forming the base structure of the tent frame, with labels 'A' and 'B' indicating other connection points or base supports. Arrows indicate insertion points for poles into connectors.

Step 2: Extending the Frame

Continue building the tent frame by connecting more poles and connectors. The diagram shows a longer, segmented arch structure being formed using components labeled 'A', 'B', 'C', and 'D'. Numbers '1' and '3' indicate the type and quantity of poles used in specific sections. Arrows indicate the direction of assembly.

Step 3: Placing the Tent Fabric

Carefully place the tent fabric (labeled 'P') over the assembled frame. A large downward arrow (⬇️) indicates the action of lowering the fabric onto the structure.

Step 4: Securing the Tent Fabric

Pull the tent fabric down and secure it to the frame. Arrows labeled '2' indicate the direction of pulling or tensioning the fabric. A smaller inset diagram shows figures pulling the fabric down to ensure a snug fit.

Step 5: Assembling the Roof Structure

Assemble the roof support structure. Poles labeled 'P' and 'R' are connected using connectors (labeled 'K'). Arrows labeled '2' indicate tensioning or securing points. A close-up inset (?) shows a 'K' connector attaching to poles 'P' and 'R'.

Step 6: Attaching Ground Supports

Attach the vertical ground support poles (labeled 'G') to the frame and the ground. An inset diagram shows a close-up of a 'G' part being attached to the frame using screws 'M' (M6*45mm).

Step 7: Final Assembly and Anchoring

Complete the tent assembly by attaching the window panels (labeled 'Q') to the sides. Secure the tent to the ground using guy ropes (labeled 'J') and ground stakes (labeled 'S'). Arrows indicate where ropes are attached and stakes are driven into the ground. A close-up inset (?) shows a 'K' connector attaching to poles 'Q' and 'R'. Another inset shows a close-up of a ground stake ('G') with a tie-down cord ('H') and a connector. The assembly is now complete ("Done").

Importer Information

Details of importers and distributors in various regions:

• US: Imported by Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA. Made in China.
• CA: Imported by Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9. Made in China.
• UK: Importer Address: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH. Made in China.
• FR: Importation Address: MH FRANCE, 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France. Fabriqué en Chine.
• ES: Importador: SPANISH AOSOM, S.L., C/ROC GROS, N°15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN. B66295775. www.aosom.es. AtencionCliente@aosom.es. Tel: 931294512. Hecho en China.
• PT: SPANISH AOSOM, S.L., C.ROC GROS N.15, 08550. ELS HOSTALETS DE BALENYÀ. Tel: 931294512 (Mon-Fri 7:30 AM to 4:30 PM). info@aosom.pt. www.aosom.pt.
• DE: Adresse des Importeurs: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany. In China hergestellt.
• IT: Importato da: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI). P.I.: 08567220960. Fatto in Cina.