Outsunny Tent Assembly Instructions
Model: 01-0006-002_84C-642V01
Reference: IN221000389V02_GL
Important Safety Information
WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT.
This tent is not fireproof. The fabric will burn if left in continuous contact with a flame source.
Precautions:
- Do NOT use candles, matches or other open flames in or near a tent.
- Fuel-powered lanterns and appliances are NOT recommended for use in or near a tent. If fuel-powered lanterns or appliances such as wood stoves or electric heaters are used, exercise extreme caution. Keep them away from the tent walls. Do NOT leave them unattended. Turn them off before going to sleep. Make sure the tent is well ventilated at all times to avoid suffocation.
- Build campfires downwind and several metres away from a tent. Extinguish campfires before leaving a campsite or going to sleep.
- Do NOT fuel lamps, heaters or stoves in a tent.
- Do NOT smoke in a tent.
- Do NOT store flammable liquids in a tent.
- Keep exits clear.
- Do NOT apply any foreign substance to a tent. It may diminish the flame resistant properties of tent material(s).
Parts List
PACKING DETAILS: TOTAL 3 BOXES
BOX-1/3
| NO. | PARTS | QTY |
|---|---|---|
| 1# | [Pole Segment] | *11 |
| 2# | [Pole Segment] | *10 |
BOX-2/3
| NO. | PARTS | QTY |
|---|---|---|
| 3# | [Pole Segment] | *10 |
| 4# | [Pole Segment] | *10 |
BOX-3/3
| NO. | PARTS | QTY |
|---|---|---|
| 5# | [Connector] | *2 |
| 6# | [Connector] | *2 |
| A | [Corner Connector] | *2 |
| B | [Corner Connector] | *2 |
| C | [Connector] | *6 |
| D | [Screw] | *10 |
| E | [Washer] | *10 |
| F | [Allen Key] | *2 |
| G | [Guy Rope] | *10 |
| H | [Stake] | *20 |
| J | [Guy Rope] | *10 |
| K | [Connector] | *48 |
| P | [Tent Top Cover] | *1 |
| Q | [Side Panel] | *2 |
| R | [Side Panel] | *2 |
Assembly Steps
Step 01: Assemble the base frame using parts 1, 2, 3, 4, A, B, C, and K.
Step 02: Construct the main frame by connecting pole segments and connectors as shown in the diagram.
Step 03: Continue assembling the frame structure.
Step 04: Drape the tent top cover (P) over the assembled frame.
Step 05: Secure the tent top cover using screws (D), washers (E), and connectors (K).
Step 06: Attach side panels (Q and R) and secure the tent with guy ropes (G and J) and stakes (H).
Contact Information
If you have any questions, please contact our customer care center. Our contact details are below:
US: 001-877-644-9366, customerservice@aosom.com
CA: 416-792-6088, customerservice@aosom.ca
UK: 0044-800-240-4004, enquiries@mhstar.co.uk
FR: 0033-1-84166106, aosom@mhfrance.fr
DE: 0049-0(40)-88307530, service@aosom.de
ES/PT: 0034-931294512, atencioncliente@aosom.es / info@aosom.pt
IT: 0039-0249471447, clienti@aosom.it
Recycling Information: Adresses sur quefairedemesdechets.fr
