Dumor Rabbit Cage Assembly Instructions

Step 1: Prepare the Cage Base

Take the folded cage out of the carton and place it on a flat surface. Remove the top panel. Ensure the door on the front panel is closed to keep the cage secure during assembly.

Diagram Description: A flat, unfolded cage panel is shown. A magnified view highlights the cage door mechanism.

Step 2: Attach Side Panels

Grab any two adjacent side panels and slide the vertical panel into the side hooks until secure.

Diagram Description: Two side panels are shown partially connected to a third vertical panel. A magnified view shows the interlocking hooks.

Step 3: Continue Assembling Sides

Repeat step 2 for the remaining side panels. You should now have the sides of the cage assembled.

Diagram Description: The cage structure is shown with three sides assembled, forming a U-shape.

Step 4: Attach Top Panel

Gently place the top panel on the cage, then secure the top panel with the hooks on all 4 sides. This is done similarly to securing the side panels.

Diagram Description: The top panel is shown being placed onto the assembled cage structure. A magnified view shows the hooks on the top panel engaging with the cage frame.

Step 5: Final Check

Check the cage and make sure all the panels are well secured in position.

Diagram Description: A complete, assembled rabbit cage is shown from the front.

Assembly Summary

Assembly Time: 3 minutes

Required for Assembly: 1 person

Tools Required: No tools required

Distribution Information

Distributed by: TRACTOR SUPPLY COMPANY

5401 VIRGINIA WAY

BRENTWOOD, TN 37027

For customer support, call: 1-888-376-9601

Visit: www.TractorSupply.com

MADE IN VIETNAM