SP37743 Basketball Stand

Before You Start

Please read all instructions carefully.

Retain instructions for future reference.

Separate and count all parts and hardware.

Read through each step carefully and follow the proper order.

We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.

Always place the product on a flat, steady and stable surface.

Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

Installation Alert

WARNING: IMPROPER INSTALLATION OR SWINGING ON THE RING MAY CAUSE SERIOUS INJURY OR DEATH

*To save your time and ensure your safety, please read the instructions carefully and check all the accessories in the package before installing, weighing, displaying and disassembling the basketball stand, master the installation steps and details before starting to install.

* This product requires at least 2 adult to install, please prepare 2 adjustable wrenches.

*If there are any problems on the installation and use, please contact our customer service at any time. We will help you in time to reduce your trouble or damage to the product!

Safety instructions for use

To ensure safety, the user must read the instructions carefully before installation and use, and install, use, store, move and disassemble according to the instructions, so as to check the counterweight of the base before use, screw fastening conditions, to avoid causing any damage to the product and users!

Parts list

Hardware:

• A: M8*120MM Spring Screws (2) - Connect Ring, Backboard and Board Bracket
• B: M8*50MM Bolt (2) - Connect Ring, Backboard and Board Bracket
• C: M8*20MM Bolt (2) - Connect Base and Pole Brace
• D: M8*16MM Bolt (2) - Connect Backboard and Board Bracket
• E: M10*90MM Bolt (2) - Connect Top Pole and Board Bracket
• F: M10*80MM Bolt (4) - Connect Top Pole, Middle Pole and Bottom Pole
• G: M8*90MM Bolt (1) - Connect Bottom Pole and Pole Brace

Accessories:

• H: Pole Brace (2)
• I: Wheel (2)
• J: Wheel Shaft (1)
• K: Board Bracket (1)
• L: Ring (1)
• M: Net (1)
• N: Backboard (1)
• O: Base (1)
• W: Top Pole (1)
• X: Middle Pole (1)
• Y: Bottom Pole (1)

Assembly Instructions

1) Install bottom pole, wheel shaft and wheel:

Place the base (O) on a flat, stable playing surface. Insert the wheel shaft (J) into the wheel (I), base (O), and the end of the bottom pole (Y) in order.

2) Install bottom pole, base and base support:

Fix one end of the pole braces (H) on the bottom pole (Y) by bolt (G). Then fix the other end of the pole braces (H) on the base (O) by bolt (C).

3) Install ring and board bracket on the backboard:

Bend the board bracket (K) into a Y shape. Fix the ring (L) and board bracket (K) on the backboard (N) by spring screws (A) and bolts (B).

4) Install top pole to the board bracket:

Use bolts (D) to fix the top of the board bracket (K) on the back of the backboard (N). Insert the top pole (W) into the board bracket (K) and fix with bolts (E).

5) Mounting to the base bracket:

Fix the top pole (W) and middle pole (X) together by 2 pcs of bolt (F). Then fix the middle pole (X) and bottom pole (Y) together by 2 pcs bolt (F).

6) Install the ball net:

Follow the diagrams A, B, C, D to attach the net (M) to the ring (L).

Altitude control

Adjust 2 bolts (E) in the top pole (W) hole to adjust the height of the basketball frame.

Important Safety Information

• Do not climb or hang from hoops, backboards, or nets.
• Do not use products with potential safety problems. If any parts need to be repaired or replaced, please contact customer service.
• Be very careful when moving on uneven ground, which may cause the product to roll over.
• To avoid ice damage to the base, pour out water or fill with sand when the temperature is below 0°C (32°F).
• If the product is used outdoors for a long time, cover the top of the main pole and elevator pole with plastic to prevent rain from affecting the product's lifespan.
• Do not wear watches, necklaces, earrings, or other jewelry to prevent hanging hoops or losing them during sports.
• When adjusting height, keep your fingers away from moving parts.
• Children are not allowed to move products or adjust their height.

Base Filling

If the product does not need to be moved frequently, filling the base with sand instead of water is recommended. Water freezes below 0°C (32°F) and can damage the base. Note: Sand cannot be poured out after being loaded into the base.

Return / Damage Claim Instructions

• DO NOT discard the box / original packaging.
• Take a photo of the box markings.
• Take a photo of the damaged part (if applicable).
• Send us an email with the images requested.