Document Details
Company: FSP Technology Inc. (全漢企業股份有限公司)
Model Number: FSP260P35A12
Part Number (P/N): 90C2600400
Assembly Title: ASSY
Sheet: 1 of 1
Revision: 01
Date: 2020.10.15
Note: The origin label shall be affixed according to business instructions.
Technical Specifications & Tolerances
Scale: 1:1 (implied by dimensions)
Unit: mm
Dimensional Tolerances
Decimal Tolerances: X: ±0.3, X.X: ±0.2, X.XX: ±0.1
Angular Tolerances: ±0.5°
Hole Tolerances: ±0.2
General Linear Tolerances:
- Less than 30mm: ±0.25
- 30mm to 100mm: ±0.35
- 100mm to 300mm: ±0.5
- Above 300mm: ±0.6
PCB Thickness: 1.6 mm
Pin Length: 3.0 MAX.
PCB Layout Overview
The drawing illustrates a printed circuit board (PCB) assembly. The overall dimensions are approximately 127.00 mm in length and 76.20 mm in width. The PCB features mounting holes, two primary connectors labeled CN200 and CN201, and a component bearing a QR code. The thickness of the PCB is specified as 1.6 mm.
Connector Pin Assignments
CN200 Pin Assignment
| Pin No. | Function | Wafer | Connector Type |
|---|---|---|---|
| 1 | +12V | MOLEX 460271208 or EQUIV. (BLACK) | |
| 2 | +12V | ||
| 3 | +12V | ||
| 4 | +12V | ||
| 5 | GND | ||
| 6 | GND | ||
| 7 | GND | ||
| 8 | GND |
CN201 Pin Assignment
| Pin No. | Function | Wafer | Connector Type |
|---|---|---|---|
| 1 | PS OFF | JST B2B-PH or EQUIV. | |
| 2 | RTN |
IN1 Pin Assignment
| Pin No. | Function | Wafer |
|---|---|---|
| 1 | N | JST B2P3-VH or EQUIV. |
| 2 | JST B2P3-VH | |
| 3 | L |
