Roborock S8 Series Replacement Parts
Compatible Models
This replacement kit is compatible with the following Roborock robot vacuum models:
- Roborock S8
- Roborock S8 Pro Ultra
- Roborock S8 MaxV Ultra
(Image description: A white Roborock S8 MaxV Ultra robot vacuum docked in its charging station, with green leaves floating around it, suggesting a clean environment.)
Self-Cleaning Roller Brush
Features:
- Excellent Material: Heat resistant construction ensures durability.
- High Efficiency: Equipped with 50,000 bristles for superior cleaning performance.
- Detachable Design: Allows for easy installation and maintenance.
(Image description: A close-up of the roller brush with water splashing around it, highlighting its cleaning capabilities. Inset images show the material's heat resistance and the brush's bristle density.)
Powerful Filtration System
The filtration system effectively captures various types of debris, including:
- Dirt
- Pet Dander
- Hair
- Paper Scraps
(Image description: The filter unit is shown with animated representations of dirt, hair, and dust being drawn into it. Close-up images at the bottom show examples of dirt, a puppy and kitten (representing pet dander), hair, and paper scraps.)
Washable & Reusable
Both the roller brush and the filter are designed to be washable and reusable, offering a cost-effective and eco-friendly solution.
- ☑ Reusable
- ☑ Washable
(Image description: The roller brush and filter are shown submerged in water, emphasizing their washable nature.)
Easy to Replace
Follow these simple steps to replace the roller brush and filter:
- Pull up the latch.
- Remove the old roller brush.
- Replace the tank filter.
(Image description: A sequence of images demonstrating the replacement process. The first image shows an arrow pointing to the latch on the robot vacuum's base. The second image shows arrows indicating the removal of the roller brush and the placement of the new filter. The third image shows the new filter being installed.)
Product Dimensions
Roller Brush:
- Diameter: 20mm / 0.79in
- Length: 115mm / 4.53in
Filter Unit:
- Width: 80mm / 3.15in
- Height: 175mm / 6.89in
(Image description: Diagrams showing the dimensions of the roller brush and the filter unit with measurements indicated.)
