WOINNMM W01 Open Ear Wireless Headphones

Quick Guide

Customer Service

Email: woinnmm2023@outlook.com

Certifications: FC, CE

FCC ID: 2A7IT-W01

Product Overview

The product consists of a charging case and two open-ear wireless earbuds. The charging case features a lid that opens to reveal the earbuds. The earbuds have a touch-sensitive area and an LED indicator light. The case itself has an LED display for battery status and a Type-C charging port.

Key Components:

Earbuds (Left and Right)
Charging Case
Type-C Charging Cable
User Manual

Product Specifications

Model: W01
Bluetooth version: V5.3+EDR
Range: > 33FT (10M)
Support: HSP/HFP/A2DP/AVRCP
Frequency response: 20Hz-20KHz
Talk time: > 8 hours
Music time: > 8 hours
Earbud charging time: 1.5 hours
Earbud weight: 10g
Charging case weight: 58g
Charging case size: 112 x 62 x 27mm
Earbud battery: 3.7V/40mAh
Charging case battery: 3.7V/400mAh
Charging case input voltage: DC 5V/500mA

Get Start

Activate the WOINNMM OWS Earbud:

To activate the wireless earbuds, take them out of the charging case. The case battery LED display will light up, and the red indicator light on the earbuds will also illuminate. Placing the earbuds back into the case with the case battery LED display on ensures they are activated and charging.

Headphone Pairing

Step 1: Automatic Power On and Pairing Mode

When the WOINNMM OWS earbuds are removed from the charging case, they will automatically power on, indicated by a "power on" voice prompt. The Left (L) and Right (R) earbuds will then auto-connect to each other, with a "du" voice prompt indicating successful connection. The earbuds are now in pairing mode.

Step 2: Connect to Device

On your phone or tablet, search for the Bluetooth device named "W01" (WOINNMM OWS). Connect to this device. A "connected" voice prompt will confirm successful pairing.

Note: If you do not hear the "du" prompt or see two "W01" entries in your Bluetooth list, re-pair the earbuds by following the steps above.

Attention

1. Auto-reconnect:

The earbuds will automatically reconnect to the last connected mobile phone if disconnected due to external factors. A "connected" voice prompt will confirm a successful reconnection.

2. Nano mode re-connect:

When using only one earbud, it will automatically connect to your phone. If auto-connection fails, manual connection via your phone's Bluetooth list is required.

3. Auto-connect between Left (L) and Right (R) earbud:

The Left and Right earbuds typically auto-connect when removed from the case, indicated by a "du" prompt. If they fail to connect, place them back in the case and remove them again.

4. Auto Power off:

If the earbuds are not connected to any device within 5 minutes of being removed from the case, they will automatically power off.

Charging

a. Charge for OWS earbuds:

Place the earbuds into the charging case to charge them. The earbuds will display a flashing red light while charging. A low battery prompt ("dudu") will sound every 30 seconds when the earbud battery is below 3.2V, and the earbuds will power off automatically if the battery drops below 3V.

b. Charge the Charging case:

Charging Method: USB-C cable
Battery Display: Digital LED display
Input: DC 5V/400mA

Touch Control

Each earbud features a touch-sensitive area for control:

Power On/Off: Press and hold the [touch-sensitive area] for 5 seconds, or place the earbuds back in the charging case. ? / ?
Answer/Hang Up Call: Single tap the [touch-sensitive area]. ?
Reject Call: Press and hold the [touch-sensitive area] for 2 seconds. ?
Play/Pause Music: Double tap the [touch-sensitive area]. ▶️ / ⏸️
Next Track: Triple tap the Right (R) earbud [touch-sensitive area]. ⏩
Previous Track: Triple tap the Left (L) earbud [touch-sensitive area]. ⏪
Volume Up: Press and hold the Right (R) earbud [touch-sensitive area] for 2 seconds. ➕
Volume Down: Press and hold the Left (L) earbud [touch-sensitive area] for 2 seconds. ➖
Activate Siri/Voice Assistant: Press and hold the [touch-sensitive area] for 2 seconds. ?️

FCC Radiation Exposure Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WOINNMM

POWER: DC 5V