Bosch AMN-P15-SIP 15W SIP Amplifier Module - Quick Installation Guide

Product Overview

This guide details the installation process for the Bosch AMN-P15-SIP, a 15W SIP Amplifier Module designed for professional audio systems.

Key features of the module include:

• Power over Ethernet (PoE) support
• General Purpose Input/Output (GPIO) terminals
• Audio input and output connections
• Integrated Test/Reset button

Installation Steps

The installation involves mounting the module and connecting it to the system.

1. Step 1: Prepare the Module

   Attach the provided mounting bracket to the Amplifier Module. Secure it using two (2) TX20 screws. A mounting clip is also included for additional stability.

   [Diagram Description: Shows the Amplifier Module, a separate mounting bracket, two screws labeled 'TX20 x2', and a clip labeled 'x1'. Arrows indicate the bracket attaching to the module using the screws.]

2. Step 2: Mount the Assembly

   Position the module assembly on the desired installation surface. Mark and drill pilot holes. Secure the assembly using appropriate screws. Maintain a minimum clearance of 5 mm around the module.

   [Diagram Description: Illustrates drilling holes on a wall or panel. Shows the module assembly being screwed into place. A callout indicates '≤ 5 mm' for clearance.]

3. Step 3: Install on DIN Rail

   If installing on a DIN rail, slide the module assembly onto the rail. Ensure it clicks securely into place.

   [Diagram Description: Shows the module assembly being attached to a standard DIN rail. A close-up view demonstrates the clipping mechanism engaging with the rail.]

4. Step 4: Wiring Connections

   With the module mounted, access the connection terminals labeled 'A' and 'B'. These terminals are used for power and data connections as per system requirements.

   [Diagram Description: Shows the module mounted on a DIN rail. Highlights the 'A' and 'B' connection terminals, ready for wiring.]