Bosch Horn Loudspeakers Installation Guide
This guide provides essential steps for installing Bosch Horn Loudspeakers, including model numbers LHN-UC15L-SIP, LHN-UC15W-SIP, LHN-UC15L, and LHN-UC15W.
Installation Steps
-
Step 1: Unpack. Verify all components: loudspeaker unit, mounting bracket, screws, and accessories.
-
Step 2: Secure Unit. Use a T20 screwdriver to secure the loudspeaker unit. [T20 screwdriver]
-
Step 3: Identify Ports. Locate rear ports: POE/POE+ for network/power and GPIO AUDIO for audio signals.
-
Step 4: Locate Button. Find the Test/Reset button on the unit.
-
Step 5: Attach Bracket. Mount the bracket to the loudspeaker unit using screws.
-
Step 6: Connect Cables. Connect POE/POE+ and GPIO AUDIO cables to their respective ports.
-
Step 7: Secure Connections. Tighten connection screws with a T20 screwdriver. [T20 screwdriver]
-
Step 8: Final Tightening. Perform final screw tightening using a T20 screwdriver. [T20 screwdriver]
-
Step 9: Mount. Secure the loudspeaker using screws through the Ø 6.8 mm bracket holes. [Ø 6.8 mm]
-
Step 10: Adjust Angle. Adjust loudspeaker tilt up to 10°. [10° tilt]
Product Information
Models: LHN-UC15L-SIP, LHN-UC15W-SIP, LHN-UC15L, LHN-UC15W
Manufacturer: Bosch Security Systems B.V.
Address: Torenallee 49, 5617 BA Eindhoven, Netherlands
Website: www.boschsecurity.com
Copyright © Bosch Security Systems B.V., 2022
Document Version: v01