Manuals+

Product Overview for temperzone models including: temperzone, air conditioning, water conditioning, air distribution, ventilation, heating, split systems, ducted reverse cycle, packaged units, fan coil units, water heaters, Hitachi Cooling & Heating, R32, R410A, HVAC, climate innovations, LOKRING, FLEXALEN, Wilo pumps, Econorad, De Dietrich, Gassero, SmarTemp

Product Overview

Sep 1, 2024 — SALES (Head Office). Damon Clark ....................................... 021-835 291. - Auckland Regional Sales Manager. Branka Volc .

Product Overiew

Premium Zone Control Interface Box (GC-AZKP)

PDF preview unavailable. Download the PDF instead.

temperzone Product Overview NZ Sept 2024 
Product Overview
1 September 2024
AIR CONDITIONING WATER CONDITIONING
AIR DISTRIBUTION VENTILATION & HEATING

DIRECTORY
SALES (Head Office) Damon Clark ....................................... 021-835 291 - Auckland Regional Sales Manager Branka Volc ...................................... 027-294 3300 - Key Account Manager Bob Daw ............................................. 021-528 118 - Account Manager Grant Reynolds ................................ 0-27-704 7244 - Account Manager John Lusty .......................................... 09-279 5266 - Internal Sales Team Leader Mike West .......................................... 09-279 5263 - Engineering Estimator
TECHNICAL SUPPORT / WARRANTY Hours 7.30 am ­ 5.00 pm ................... 09-279-5251 Sean Christy - Tz Technical Support Engineer Ronald Serrato - Hitachi Technical Support Engineer Hardik Tanti - Technical Support Engineer
ADMINISTRATION Bryan Waters ...................................... 09-279 5257 - National Sales Manager Jamie Nankivell .................................. 09-279 5256 - Marketing Manager Kylie Morey ................09-277 3191 / 021-196 4648 - Customer Care Manager Accounts Receivable ......................... 09-279 5254
SPARE PARTS / DESPATCH Hours 7.30 am ­ 5.00 pm ................... 09-279 5253
RECEPTION ........................................ 09-279 5250 Facsimile ............................................ 09-275 5637
HAMILTON BRANCH Hours 8.00 am ­ 4.30 pm ...................04-569 3262 Graham Lawes ................................. 0-27-562 6452 - Account Manager (Hamilton)
WELLINGTON BRANCH Hours 8.00 am ­ 4.30 pm ...................04-569 3262 Corbin Berriman ............................... 0-21-984 827 - Wellington Regional Manager Craig Levien ..................................... 0-21-558 758 - Account Manager Mark Jury ......................................... 021-454 0405 - Account Manager
CHRISTCHURCH BRANCH Hours 8.00 am ­ 4.30 pm ................. 03-379 3216 Tony Hansen ................................. 0-27-435 7203 - South Island Regional Manager Craig Wiffen..................................... 0-27-433 0550 - Account Manager Ian Kimpton..................................... 0-21-321 197 - Account Manager
EMAIL ............................ nzsales@temperzone.com ............ customerservices@temperzone.com ................. nztechsupport@temperzone.com ................... nzspareparts@temperzone.com

Contact Us AUCKLAND
38 Tidal Rd, Mangere South, 2022 Private Bag 93303, Otahuhu, 1640
Customer Services Ph. 0800-TZWARRANTY
or 0-9-279 5251
HAMILTON
30 Gallagher Drive, Melville 3026 PO Box 15-058, Dinsdale 3243
Ph. 0-7-839 2705
WELLINGTON
6 Union Street, Petone 5012
Sales Office Ph. 0-4-569 3262
CHRISTCHURCH
40 Cass Street, Sydenham 8023
Sales Office Ph. 0-3-379 3216
WEBSITES
www.temperzone.com www.temperzone.biz (Trade)
www.hitachiaircon.co.nz

Content
Contact Us Contents
Air Conditioning Split Systems - Ducted Reverse Cycle Split Systems - Accessories Controls LOKRING Packaged Units - Ducted Reverse Cycle Packaged Systems ­ Accessories Vertical Packaged Units - Ducted Reverse Cycle Packaged Units - Ducted Water Cooled Chilled Water Fan Coil Units Chilled Water Air Handling Units
Heat Pump Water Heaters
Air Distribution Radial Swirl Diffusers RPD - Round Plastic Ceiling Diffusers Grilles Adaptors for Grilles Flexiduct, Duct Tape, Duct Joiners Air Regulating Damper, Custom Grilles
Ventilation In-Line Centrifugal Fans
Other Products Circulating Water Pumps Pre-Insulated Pipe

Page 2 3
4 6 9 11 14 17 18 19 22 26 27
28 29 29 29 30 31
32
33 36

Hitachi ­ refer dedicated Temperzone Account Manager for a catalogue or vist www.hitachiaircon.co.nz

Contents

3

Air Conditioning

t CONTENTS

Split Systems - Ducted RRe3v2erse Cycle

These new systems are MEPS compliant, ie they meet the Minimum Energy Performance Standards set out in AS/NZS 3823.2:2013 and use refrigerant R32, which has a low GWP.
Each system includes a variable capacity inverter compressor ­ enabling close temperature control. Inverters provide additional economy at part load.
A wide range of unit sizes have been developed to meet the needs of any application, e.g. homes, apartments, offices, shop, restaurants, public and private areas of hotels, open plan office and work spaces, halls, hospitals and factories.
Filter box c/w filter available.
These ISD models are: separable (excl. 351), include high efficiency EC motors with optional 0-10V speed control, higher static performance, 12V control and include in-built safety drain tray. BMS/modbus compatibility is standard.

ITEM NO.
845-171-001 846-171-001

DESCRIPTION
Single Phase: ISD 171LYX OSA 171RLSFH

UNIT NOMINAL NOMINAL

COOLING HEATING

kW

kW

Indoor 14.8

14.9

Outdoor (8.6~18.5) (7.0~18.3)

845-171-001 846-171-003
845-211-001 846-211-003
845-251-001 846-251-003
845-351-001 846-352-003

Three Phase:
ISD 171LYX OSA 171RLTFH
ISD 211LYX OSA 211RLTFH
ISD 251LYX OSA 251RLTFH
ISD 351LYX OSA 352RLTFV

Indoor 14.8

14.9

Outdoor (8.6~18.5) (7.0~18.3)

Indoor 19.5 20.85 Outdoor (9.4~25.3) (8.4~25.6)

Indoor 23.3

23.3

Outdoor (13.3~29.5) (10.4~29.2)

Indoor 32.7

31.3

Outdoor (13.5~37.1) (12.0~35.3)

Note: ISD safety drain tray is built-in. Once separated, separable ISD units (up to 251) will fit through a clear aperture sized 550 mm sq. or more. Outdoor Unit complete with UC8 Controller, which is compatible with BMS/modbus Indoor Unit complete with IUC Controller. Room Temp. Controller can be direct connected to ISD indoor or OSA outdoor unit Outdoor unit is pre-charged with refrigerant for 15m (OSA 171­251) or 10m (OSA 352) of interconnecting pipe.
OPTIONS: SAT-3 Room Temperature Controller 6 Zone Control Kit for use with SAT-3 TZT-100 Room Temperature Controller ISD Filter Box c/w filter ISD Supply & Return Air Plenums ISD Spigot Plate adaptors (for unit separation) ISD Spring Mounting Kit OSA Louvre Guard Kit (OSA 171/211/251) OSA 171/211/251 c/w Louvre Guards; made-to-order; POA OSA Anti-vibration mounts OSA Wall mounting kit (OSA 171/211) Refer to Accessories on page 8; Controls page 11.

244-002-308 244-002-309 244-002-310

LOUVRE GUARDS KIT (Supplied separately) :
for OSA 171
for OSA 211
for OSA 251

Nomenclature Suffixes: R ­ Reverse cycle system L ­ Refrigerant R32 S ­ Single phase power supply T ­ Three phase power supply H ­ Horizontal discharge fans V ­ Vertical discharge fans Y ­ EC motor fan F ­ Inverter compressor system X ­ Includes IUC.
4

www.temperzone.biz

1 September 2024

t CONTENTS

Air Conditioning

Split Systems - Ducted Reverse Cycle

These new systems are MEPS compliant, ie they meet the Minimum Energy Performance Standards set out in AS/NZS 3823.2:2013 and use refrigerant R410A. A wide range of unit sizes have been developed to meet the needs of any application, e.g. homes, apartments, offices, shop, restaurants, public and private areas of hotels, open plan office and work spaces, halls, hospitals and factories. These dual compressor systems enable staged capacity performance. Digital systems have a finer variable capacity ability for close control applications.
diGital

ITEM NO.
525-501-601 525-501-001 525-511-001 526-501-201 525-611-001 525-621-001 526-651-201 525-591-201 525-591-211 525-601-201 525-601-211 526-641-201 525-631-201 525-631-211 525-641-201 525-641-211 526-671-201
525-501-601 525-501-001 525-511-001 536-501-201 525-661-223 525-671-201 526-731-223 525-701-201 525-711-201 526-741-223

DESCRIPTION

UNIT

NOMINAL COOLING
kW

Dual Compressor Systems Three Phase without Controls:

ISD 380KBY

Indoor

ISD 380KBH-P* EC Plug Indoor

ISD 380KBV-P* EC Plug Indoor

OSA 380RKTBV (6) Outdoor

ISD 465KBH ISD 465KBV* OSA 465RKTBV (6)

Indoor Indoor Outdoor

ISD 570KBH

Indoor

ISD 570KBV*

Indoor

ISD 570KBH-P* EC Plug Indoor

ISD 570KBV-P* EC Plug Indoor

OSA 570RKTBV (6) Outdoor

ISD 670KBH

Indoor

ISD 670KBV*

Indoor

ISD 670KBH-P* EC Plug Indoor

ISD 670KBV-P* EC Plug Indoor

OSA 670RKTBV (6) Outdoor

37.2 37.4
"
44.6 "
56.1 56.6
65.9 " 65

NOMINAL HEATING
kW
38.3 38.5
"
440 "
55.9 53.4
62.8 " 62

Digital Compressor Systems

ISD 380KBY

Indoor

ISD 380KBH-P* EC Plug Indoor

ISD 380KBV-P* EC Plug Indoor

OSA 380RKTBGV(6)* Outdoor

ISD 840KBXH-P EC Plug Indoor ISD 840KBXV-P* EC Plug Indoor OSA 840RKTBGV (8) Outdoor

ISD 950KBXH-P EC Plug Indoor ISD 950KBXV-P* EC Plug Indoor OSA 950RKTBGV (8) Outdoor

37.4 37.4
"
84.6 "
93.0 "

35.7 38.5
"
78.3 "
90.4 "

Nomenclature Suffixes: K ­ Refrigerant R410A B ­ Twin system G ­ Digital compressor sys. H ­ Horizontal supply air P ­ Plug/EC motor V ­ Vertical supply air Y ­ EC motor
1 September 2024

Note: * Not a stock item; made to order. (6) (8) Complete with UC6 or UC8 Controller, respectively. Above models include 24V control. Outdoor unit is precharged with refrgerant for 10m of interconnecting pipe.
OPTIONS: Refer to Accessories pages 8­11. Factory fitted options:
SAT-3 Controller, TZT-100 Controller, TZT-701 Controller, Electric Heat. Digital compressor version (ie 1 digital + 1 fixed)

www.temperzone.biz

5

Air Conditioning

Split Systems - Accessories

ITEM NO.

DESCRIPTION

492-000-004 492-000-005 492-000-030

SUPPLY AIR PLENUMS (Round Spigots) : for ISD 171LYX (2 x 400 dia.) for ISD 211/251 LYX (3 x 400 dia.) for ISD 351LYX (4 x 400 dia.)

No. of inlets/outlets
varies

492-100-004 492-100-005 492-100-006 492-100-008

RETURN AIR PLENUMS (Round Spigots) : for ISD 171LYX (2 x 400 dia.) for ISD 211LYX (2 x 400 dia.) for ISD 251LYX (3 x 400 dia.) for ISD 351LYX (4 x 400 dia.)

t CONTENTS

325-000-051 325-000-052

FRESH AIR INLET SPIGOTS (for R/A Plenums) : for ISD 171/211 LYX (150 dia.) for ISD 251/351 LYX (200 dia.)

525-271-705 525-311-715 525-311-715

SPIGOT PLATE ADAPTORS : For rejoining gap between separable units (2 required) for ISD 171LYX (Ø400 mm x 2) for ISD 211LYX (Ø450 mm x 2) for ISD 251LYX (Ø450 mm x 2) Refer page 40 for flexible ducting.

493-000-004 493-000-006 493-000-007 493-000-016 525-501-605

FILTER BOX c/w washable* synthetic fibre filter media (Supplied separately) : for ISD 171LYX (EU2/G2 filter) for ISD 211LYX (EU2/G2 filter) for ISD 251LYX (EU4/G4 filter) for ISD 351LYX (EU4/G4 filter) for ISD 380KB(Y)(-P) (EU2/G2 filter)
* Except for EU4/G4 rated filters which are disposable

307-161-101 307-341-101

SPRING MOUNTING KIT : for ISD 171­251LYX (No.2) for ISD 351LYX, ISD 380KBY (No.3)

6

www.temperzone.biz

1 September 2024

t CONTENTS

Air Conditioning

Split Systems - Accessories

ITEM NO.

DESCRIPTION

ANTI-VIBRATION MOUNTS (Rubber) : 060-000-170 for OSA 171­352 Outdoor Units (set of 4)

526-061-007

WALL MOUNTING KIT :
Powder coated galv. steel (SWL 185kg) for OSA 171­211 (H)

FAULT INDICATOR (Supplied separately) : 201-000-105 Fault Indicating Auxiliary Relay Board
DRAIN CONNECTION ADAPTOR (25/13mm) (Supplied separately) : 060-000-039 for OSA 171­352

119-000-080 119-000-082

REPLACEMENT FILTERS (EU2/G2 rated, washable synthetic fibre): for ISD 171LYX for ISD 211LYX

019-400-002 019-400-003
019-400-003

REPLACEMENT FILTERS (EU4/G4 rated, disposable):
ISD 251LYX - 3 required in total 400 x 500 x 50 - 2 required 400 x 625 x 50 - 1 required.
ISD 351LYX 400 x 625 x 50 - 3 required

1 September 2024

www.temperzone.biz

7

Air Conditioning

t CONTENTS

Split Systems - Accessories

ITEM NOI. DESCRIPTION

019-400-008 019-400-010
019-400-004 019-400-008
019-400-004 019-400-008
019-400-009 019-400-008

FILTERS (Disposable, supplied separately) :
ISD 465KB Filters (rated EU4) - 6 required in total: 450 x 500 x 50 - 3 required 450 x 600 x 50 - 3 required
ISD 570/670KB Filters (rated EU4) - 6 required in total: 500 x 500 x 50 - 2 required 450 x 500 x 50 - 4 required
ISD 840KB Filters (rated EU4) - 8 required in total: 500 x 500 x 50 - 4 required 450 x 500 x 50 - 4 required
ISD 950KB Filters (rated EU4) - 13 required in total: 250 x 400 x 50 - 5 required 450 x 500 x 50 - 8 required

019-000-038 019-000-040
019-000-033 019-000-038
019-000-033 019-000-038
019-000-039 019-000-038
201-000-129
201-000-386
201-000-105 201-000-037 201-000-190 019-000-041 019-500-100

FILTERS (Washable, aluminium frame, supplied separately)* :
ISD 465KB Filters (rated EU4) - 6 required in total: 450 x 500 x 50 - 3 required 450 x 600 x 50 - 3 required
ISD 570/670KB Filters (rated EU4) - 6 required in total: 500 x 500 x 50 - 2 required 450 x 500 x 50 - 4 required
ISD 840KB Filters (rated EU4) - 8 required in total: 500 x 500 x 50 - 4 required 450 x 500 x 50 - 4 required
ISD 950KB Filters (rated EU4) - 13 required in total: 250 x 400 x 50 - 5 required 450 x 500 x 50 - 8 required
* NB. These accessories can be field fitted. If accessories are requested to be fitted by temperzone, then a stock unit modification fee is applicable to items purchased from stock. This fee does not apply to units made to order. Filter sizes are nominal; refer to Temperzone for actual measurements.
MISCELLANEOUS ACCESSORIES :
Signal Isolator for EC Motor (ie Y models) using 0-10V fan speed control option (provided by t/stat or BMS by others)
Signal Input 0-10V for OSA digital models (UC7) with Controller by others
Fault Indicating Auxilary Relay Board
Electrical Filter
Indoor Coil Sensor Installation Kit
Magnehelic Guage 0­500 Pa Manometer 0­750 Pa

8

www.temperzone.biz

1 September 2024

t CONTENTS
Controls

Air Conditioning

ITEM NO.

DESCRIPTION

201-000-146
201-000-074 201-000-075 201-000-077
201-000-116 201-000-073
201-000-195
201-000-047 221-000-123 221-000-124 221-000-125 221-000-126

temperzone SAT-3 ROOM TEMPERATURE CONTROLLER :
for ISD-KYX/OSA 116­351 (c/w IUC/UC8) Accessories:
Interface cable - 10m (4 core shielded twisted pair) Interface cable - 20m (4 core shielded twisted pair) Interface cable - 30m (4 core shielded twisted pair) Optional:
Remote Return Air duct sensor c/w 5 m lead Zone Control Kit (2­6 zones)(excl. ISD 87), 2­6 sensors and dampers required Remote Wall Mtd Air Sensor in box, excludes lead, switchable single or twin bead Sensor lead (excludes sensor) - 6 m Zone Damper 24V 200 dia. Zone Damper 24V 250 dia. Zone Damper 24V 300 dia. Zone Damper 24V 350 dia.

525-001-016
Optional:
201-000-116 201-000-026 201-000-034 201-000-063 201-000-024
201-000-036 201-000-032

temperzone SAT-2.1 THERMOSTAT KIT :
for retro-fitting to 24V single & two stage sys. (incl. 10m interface cable to wall plaque) suits ISD 380­950 K and OPA 116/161/186/242/294/370/465/550/850/960 RKT
Remote Return Air Duct Sensor c/w 5 m lead Interface Cable (to wall plaque) - 10 m Interface Cable (to wall plaque) - 20 m SAT Infra Red Remote Controller Slimline SAT-2.1 Wall Control plaque (additional) temperzone Zone Control Kit for SAT-2.1 SAT-2 Zone Control Kit Transformer for SAT-2, 230V/10V

201-000-350
201-000-074 201-000-075 201-000-077
201-000-116
201-000-195
201-000-046 201-000-047 201-000-048 201-000-049 201-000-071 201-000-070

temperzone TZT-100 THERMOSTAT :
for use with units fitted with IUC and/or UC6/UC7/UC8 Controllers, including digitals, but not suitable four units supplied with Economiser dampers. TZT-100 Wall Plaque (excl. cable) Accessories:
Interface cable - 10m (4 core shielded twisted pair) Interface cable - 20m (4 core shielded twisted pair) Interface cable - 30m (4 core shielded twisted pair) Optional:
Remote Return Air Duct Sensor c/w 5 m lead (can only be used as a single sensor, not for averaging) Remote Wall Mtd Air Sensor in box, excludes lead, switchable single or twin bead Sensor lead (excludes sensor) - 1.5 m Sensor lead (excludes sensor) - 6 m Sensor lead (excludes sensor) - 12 m Sensor lead (excludes sensor) - 25 m Easy Zone Touch (EZT) Wall Plaque Zone Relay Board (EZT) c/w housing

1 September 2024

www.temperzone.biz

9

Air Conditioning

t CONTENTS

Controls

ITEM NO.

DESCRIPTION

201-000-700

temperzone WIFI SERVICE UTILITY (WSU)
for use with units fitted with UC6/UC7/UC8 Controllers
View a unit's operating data using a WiFi connection and web browser on your mobile device. Data is viewed in real time and can be used to record commissioning status and diagnose operational faults. A running history can also be retrieved.
WiFi Service Utility (WSU)

201-000-867 201-000-378

SERVICE INTERFACE DISPLAY (pGDN1) Operating pressures, superheat, set-point, compressor amps, etc and status can be read from its various display screens, including history. Avoids the need to connect guages
UC6 Service Inferface device (excl. cable) Communications cable 3m (for the above)

525-001-015

temperzone TZT-701 THERMOSTAT KIT (While stocks last) :
for retro-fitting on ISD/OSA 840,950RKT (non-UC6/UC7/UC8), (24V single & two stage systems) Accessories & Optional items: All items as listed above for the TZT-100 Controller

Replacement Parts

ITEM NO.

DESCRIPTION

201-000-485
201-000-100 201-000-149 201-000-101 201-000-102 201-000-103 201-000-110 201-191-001 201-000-031 201-000-001 525-001-014 525-001-016 201-000-042

UC6 Controller (Twin fixed speed comp.) ­ refer temperzone for other variations UC8 Controller ­ refer tz Tech. Support for appropriate version Outdoor Unit Controller (OUC4) IUC Indoor Unit Controller Sensor (S/valve) - red lead 2m Sensor (HPC) - yellow lead 2m Sensor (De-Ice) - blue lead 2m
HP Fan Speed Controller Electronic De-Ice (R22 sys.)
SAT-1 Controller board (PCB) SAT-2.1 Controller board (PCB) SAT-2.1 Thermostat Kit 230V SAT-2.1 Thermostat Kit 24V TZT-701 Wall Control plaque

10

www.temperzone.biz

1 September 2024

t CONTENTS

Air Conditioning

LOKRING ­ Solder-free Tube Connectors

460-000-001 460-000-010

Tooling
LOKbox MZ-V MB 0835 for 6/8/9.5/13/16/19/22/28/35mm dia. pipe
LOKtool MB 25 EVP Assembly Jaws (2 req'd) $67.00 ea. for 25mm dia. pipe

460-000-020 460-000-021 460-000-022 460-000-023 460-000-024

LOKprep Solution

HT 15 ML (use in ambients from 25°C)

HT 50 ML " " "

" "

LT 15 ML (use in ambients up to 30°C)

LT 50 ML " " "

" "

Abrasive mat 3 pack

460-000-030 460-000-031 460-000-032 460-000-033 460-000-034 460-000-035 460-000-037 460-000-038

Straight Brass Connectors 6.35 (1/4") NK Ms 50 9.53 (3/8") NK Ms 50 12.7 (1/2") NK Ms 50 16 (5/8") NK Ms 50 19 (3/4") NK Ms 50 22 (7/8") NK Ms 50 28 (1 1/8") NK Ms 50 35 (1 3/8") NK Ms 50

460-000-064 460-000-040 460-000-065 460-000-041 460-000-042 460-000-043 460-000-044 460-000-045 460-000-046 460-000-047 460-000-048 460-000-050 460-000-051 460-000-052 460-000-060 460-000-061 460-000-062 460-000-067

Reducer Brass Connectors 8.00 / 6.35 NR Ms 50 9.53 / 6.35 NR Ms 50 9.50 / 8.00 NR Ms 50 12.7 / 6.35 NR Ms 50 12.7 / 9.53 NR Ms 50 16 / 6.35 NR Ms 50 16 / 9.53 NR Ms 50 16 / 12.7 NR Ms 50 19 / 9.53 NR Ms 50 19 / 12.7 NR Ms 50 19 / 16 NR Ms 50 22 / 12.7 NR Ms 50 22 / 16 NR Ms 50 22 / 19 NR Ms 50 28.6 / 16 NR Ms 50 28.6 / 19 NR Ms 50 28.6 / 22 NR Ms 50 35 / 28.6 NR Ms 50

1 September 2024

www.temperzone.biz

11

Air Conditioning

t CONTENTS

LOKRING ­ Solder-free Tube Connectors (cont'd)

460-000-070 460-000-089 460-000-073 460-000-076 460-000-077 460-000-079 460-000-080 460-000-081 460-000-084 460-000-087 460-000-085 460-000-086 460-000-090

Stabilisation Inserts 6.35 (1/4") - for 0.8 mm walled tube * 8.00 (5/16") - for 0.8 mm wall tube 9.53 (3/8") - for 0.8 mm wall tube * 12.7 (1/2") - for 0.8 mm wall tube 12.7 (1/2") - for 0.9 mm wall tube * 16 (5/8") - for 0.8 mm wall tube * 16 (5/8") - for 1.0 mm wall tube 19 (3/4") - for 1.0 mm wall tube * 19 (3/4") - for 1.1 mm wall tube 22 (7/8") - for 1.1 mm wall tube 22 (7/8") - for 1.4 mm wall tube 28 (1 1/8") - for 1.2 mm wall tube 35 (1 3/8") - for 1.5 mm wall tube

* Use with temperzone Copper Pipe (page12).

Note: To ensure a leak free joint it is important to use a Lokring stablisation insert designed to match the wall thickness of your copper tube.

460-000-100 460-000-101 460-000-102 460-000-103 460-000-104 460-000-105 460-000-106

Elbow Copper Connectors* 9.35 (3/8") Cu 90° EB 12.7 (1/2") Cu 90° EB 16 (5/8") Cu 90° EB 19 (3/4") Cu 90° EB 22 (7/8") Cu 90° EB 28 (1 1/8") Cu 90° EB 35 (1 3/8") Cu 90° EB

* Complete with inserts but need Straight Brass Connectors for each end (see p.12)

WARRANTY: 12 months on tools.

12

www.temperzone.biz

1 September 2024

t CONTENTS

Air Conditioning

Packaged Units - Ducted Reverse Cycle

These are single piece, air cooled, roof top units that provide a three phase, ducted, reverse cycle package. The OPA range has been developed to meet the needs of light commercial and retail premises, e.g. offices, motels, restaurants and shops.
These new systems are MEPS compliant and use refrigerant R410A.

ITEM NO.

MODEL

Single Compressor Systems

556-051-701

OPA 116RKTYH (7)

556-091-701

OPA 161RKTYH (7)

556-101-701

OPA 186RKTYH (7)

556-111-601

OPA 201RKTYH (7)

NOMINAL COOLING
kW
11.6 16.1 18.6 20.0

NOMINAL HEATING
kW
10.8 14.4 16.2 19.0

OPA 100­201 (NB no Economiser option)

Eco Systems (Variable capacity + EC motor/s)

566-101-701

OPA 186RKTYGH (7)

7.4~18.6

566-111-601

OPA 201RKTYGH (7)

8.0~20.0

Note: (7) Complete with UC7 Controller.

OPTIONS TZT-100 Controller: refer page 9.

2.4~16.2 2.7~18.1

Packaged Units - Ducted RRe3v2erse Cycle

Econex are the next generation inverter models, using R32 refrigerant for a lower GWP, and high static EC plug fans and axial fans. Units include electronic expansion valves (EEV). Opposite handing, Economiser (with or without Viking) and Fresh Air options available. Refer to Temperzone for further information.
These are single piece, air cooled, roof top units that provide a three phase, ducted, reverse cycle package. The OPA range has been developed to meet the needs of light commercial and retail premises, e.g. offices, motels, restaurants and shops. These new systems are MEPS compliant and use refrigerant R32.
1 September 2024

ITEM NO.

MODEL

Single Compressor Systems

NOMINAL COOLING
kW

Econex Systems (Inverter variable capacity + EC motor/s)

876-025-701 876-025-723

OPA 250RLTFPQ01 (8)

24.6

OPA 250RLTFPQ23* (8) (10.1~29.1)

876-035-701 876-035-723

OPA 350RLTFPQ01 (8)

34.8

OPA 350RLTFPQ23* (8) (18.0~45.4)

876-045-701 876-045-723

OPA 450RLTFPQ01 (8)

43.3

OPA 450RLTFPQ23* (8) 18.2~52.4

876-056-701 876-056-723

OPA 560RLTFPQ01 (8)

53.5

OPA 560RLTFPQ23* (8) (27.4~64.8)

Econex Systems c/w Economiser (control by others)

877-025-701 877-025-723

OPA 250RLTFPQ01-Z* (8) 24.6 OPA 250RLTFPQ23-Z (8) (10.1~29.1)

877-035-701 877-035-723

OPA 350RLTFPQ01-Z* (8) 34.8 OPA 350RLTFPQ23-Z (8) (18.0~45.4)

877-045-701 877-045-723

OPA 450RLTFPQ01-Z* (8) 43.3 OPA 450RLTFPQ23-Z (8) 18.2~52.4

877-056-701 877-056-723

OPA 560RLTFPQ01-Z* (8) 53.5 OPA 560RLTFPQ23-Z (8) (27.4~64.8)

Note: * Not a Stock Item (8) Complete with UC8 Controller.

OPTIONS Filters Drain tundish set
TZT-100 Controller; refer page 9
CTC-1 Climate Touch Controller (coming soon) Economiser ­ with Viking Controller Fresh Air Cowl

www.temperzone.biz

NOMINAL HEATING
kW
26.9 (6.5~29.3)
37.0 (13.9~47.0)
44.4 16.5~54.5
57.0 (24.0~63.1)
26.9 (6.5~29.3)
37.0 (13.9~47.0)
44.4 16.5~54.5
57.0 (24.0~63.1)
Nomenclature OPA Suffixes: R ­ Reverse cycle system K ­ Refrigerant R410A L ­ Refrigerant R32 T ­ Three phase power supply H ­ Horizontal supply/return air Y ­ EC indoor air fan motor P ­ EC Plug fan G ­ Digital scroll compressor F ­ Inverter compressor system Q ­ EC outdoor fan Z ­ Economiser (excl. controls) 01 ­ Horizontal supply/return air 10 ­ Opposite Hand version 23 ­ Downward supply/return air 32 ­ Opposite Hand version
13

Air Conditioning

Packaged Units - Ducted Reverse Cycle

The Eco Series provides added economy, flexibility and performance through using variable capacity compressors, high static EC motor plug fan technology and EEV valves (except 186/201). compliant and use refrigerant R32.

ITEM NO.
866-071-701 866-071-723

MODEL
OPA 705RKTBG01-P (8) OPA 705RKTBG23-P *

NOMINAL NOMINAL

COOLING HEATING

kW

kW

14~69.7 "

13.5~67.5 "

Note: * Not a Stock Item. 8) Complete with UC8 Controller.
OPA 705 Eco model has a variable + fixed speed compressor combination. OPA 855 Eco model includes two variable speed (digital) compressors.
OPTIONS Filters; refer page 16. TZT-100 Controller, SAT-3 Controller kit for UC8 models; refer page 9.
Opposite hand versions (OPA 705/855 Eco) Economiser and/or Viking Controller (OPA 705/855), Fresh Air Kit (OPA 705/855).

t CONTENTS

14

www.temperzone.biz

1 September 2024

t CONTENTS

Air Conditioning

Packaged Units - Ducted ReRv3e2rse Cycle

Econex goes one step further by including Inverter compressors.
These are single piece, air cooled, roof top units that provide a three phase, ducted, reverse cycle package. The OPA range has been developed to meet the needs of light commercial and retail premises, e.g. offices, motels, restaurants, theatres, supermarkets and shopping malls.
These new systems are MEPS compliant and use refrigerant R32.

ITEM NO.

MODEL

NOMINAL COOLING
kW

NOMINAL HEATING
kW

Econex Systems (Inverter + Fixed for variable capacity + EC motor/s)

866-082-701

OPA 820RLTB1FPQ01 (8)

11~84

10~87

866-082-723

OPA 820RLTB1FPQ23 (8)

"

"

866-097-701

OPA 970RLTB1FPQ01 (8)

15~99

14~96

866-097-723

OPA 970RLTB1FPQ23 (8)

"

"

866-141-701 866-141-723
866-171-701 866-171-723

OPA 1410RLTM1FPQ01 (8) OPA 1410RLTM1FPQ23 (8) OPA 1710RLTM1FPQ01 (8) OPA 1710RLTM1FPQ23 (8)

12~189 "
17~177 "

13~181 "
15~182 "

866-211-701 866-211-723

OPA 2110RLTM1FPQ01 (8) OPA 2110RLTM1FPQ23 (8)

31~209 "

15~206 "

867-082-701 867-082-723

Economiser versions (excl. controls):

OPA 820RLTB1FPQ01-Z (8)

11~84

OPA 820RLTB1FPQ23-Z (8)

"

10~87 "

867-097-701 867-097-723

OPA 970RLTB1FPQ01-Z (8) OPA 970RLTB1FPQ23-Z (8)

15~99 "

14~96 "

867-141-701 867-141-723

OPA 1410RLTM1FPQ01-Z (8) OPA 1410RLTM1FPQ23-Z (8)

12~189 "

13~181 "

867-171-701 867-171-723

OPA 1710RLTM1FPQ01-Z (8) OPA 1710RLTM1FPQ23-Z (8)

17~177 "

15~182 "

867-211-701 867-211-723

OPA 2110RLTM1FPQ01-Z (8) OPA 2110RLTM1FPQ23-Z (8)

31~209 "

15~206 "

Econex Pro Systems (Inverter variable capacity + EC motor/s) *

876-097-701

OPA 970RLTB2FPQD01 (8)

16~102

13~110

876-097-723

OPA 970RLTB2FPQD23 (8)

"

"

876-141-701 876-141-723
876-171-701 876-171-723

OPA 1410RLTM4FPQD01 (8) OPA 1410RLTM4FPQD23 (8) OPA 1710RLTM4FPQD01 (8) OPA 1710RLTM4FPQD23 (8)

12~190 "
15~206 "

12~190 "
15~214 "

876-211-701 876-211-723

OPA 2110RLTM4FPQD01 (8) OPA 2110RLTM4FPQD01 (8)

27~239 "

15~244 "

877-097-701 877-097-723

Economiser versions (incl. controls):

OPA 970RLTB2FPQ01-Z (8)

16~102

OPA 970RLTB2FPQ23-Z (8)

"

13~110 "

877-141-701 877-141-723
877-171-701 877-171-723
877-211-701 877-211-723

OPA 1410RLTM4FPQ01-Z (8) OPA 1410RLTM4FPQ23-Z (8) OPA 1710RLTM4FPQ01-Z (8) OPA 1710RLTM4FPQ23-Z (8) OPA 2110RLTM4FPQ01-Z (8) OPA 2110RLTM4FPQ23-Z (8)

12~190 "
115~206 "
27~239 "

12~190 "
15~214 "
15~244 "

NEW

Nomenclature OPA Suffixes: R ­ Reverse cycle system K ­ Refrigerant R410A L ­ Refrigerant R32 T ­ Three phase power supply B ­ Dual compressor system M ­ Multiple compressor system P ­ EC Plug fan G ­ Digital scroll compressor F ­ Inverter compressor system D ­ Advanced controller Q ­ EC outdoor fans Z ­ Economiser (excl. controls) 01 ­ Horizontal supply/return air 10 ­ Opposite Hand version 23 ­ Downward supply/return air 32 ­ Opposite Hand version
1 September 2024

Econex units use a mix of inverter + fixed compressors, and using R32 refrigerant for a lower GWP. More suited to external BMS control applications. Economiser (-Z) models include dampers c/w motors and cowl; no controls.
Econex Pro units include a sophisticated Carel c.pCO programmed logic controller and four inverters. Particularly suited to supermarkets and process applications where humidity control is important. Made to order. Refer to Temperzone for further information.
* Start-up Commissioning by Temperzone is a warranty requirement on Econex Pro models, and varies dependant on location of install.
(8) Complete with UC8 slave controllers.

OPTIONS Filters (p.16), TZT-100 Thermostat for Econex model only (excl. -Z variant) (p.9), Remote Service Inferface Device (pGD1) for Econex Pro (p.18).
Options: Opposite hand versions, Reheat coil versions, Economiser version (NB controls by others on Econex model). Economiser & Spill Air (Bottom Return Air configurations only).

www.temperzone.biz

15

Air Conditioning

t CONTENTS

Packaged Systems ­ Accessories

ITEM NO.

DESCRIPTION

019-400-005
019-400-001 019-400-005
019-400-004
019-400-005
019-400-008
019-400-004
019-400-005 019-400-007
019-400-005
019-400-004 019-400-005

FILTERS (Disposable, supplied separately)* :
OPA 250 Filters (rated EU4) : Filter size 600 x 500 x 50 - 2 required
OPA 350 Filters (rated EU4) - 3 required in total: Filter size 600 x 300 x 50 - 1 required Filter size 600 x 500 x 50 - 2 required
OPA 450 Filters (rated EU4) : Filter size 500 x 500 x 50 - 4 required
OPA 560 Filters (rated EU4) : Filter size 600 x 500 x 50 - 4 required
OPA 705 Filters (rated EU4) Filter size 450 x 500 x 50 - 9 required
OPA 820, 970 Filters (rated EU4) Filter size 500 x 500 x 50 - 9 required
OPA 1410 Filters (rated EU4) - 9 required in total: Filter size 600 x 500 x 50 - 3 required Filter size 600 x 600 x 50 - 6 required
OPA 1710 Filters (rated EU4) - 12 required in total: Filter size 600 x 500 x 50 - 12 required
OPA 2110 Filters (rated EU4) - 16 required in total: Filter size 500 x 500 x 50 - 12 required Filter size 600 x 500 x 50 - 12 required

019-000-034
019-000-037 019-000-034
019-000-033
019-000-034
019-000-038
019-000-033
019-000-034 019-000-031
019-000-034
019-000-033 019-000-034

FILTERS (Washable, aluminium frame, supplied separately)*
OPA 250 Filters (rated EU4) : Filter size 600 x 500 x 50 - 2 required
OPA 350 Filters (rated EU4) - 3 required in total: Filter size 600 x 300 x 50 - 1 required Filter size 600 x 500 x 50 - 2 required
OPA 450 Filters (rated EU4) : Filter size 500 x 500 x 50 - 4 required
OPA 560 Filters (rated EU4) : Filter size 600 x 500 x 50 - 4 required
OPA 705 Filters (rated EU4) Filter size 450 x 500 x 50 - 9 required
OPA 820, 970 Filters (rated EU4) Filter size 500 x 500 x 50 - 9 required
OPA 1410 Filters (rated EU4) - 9 required in total: Filter size 600 x 500 x 50 - 3 required Filter size 600 x 600 x 50 - 6 required
OPA 1710 Filters (rated EU4) - 12 required in total: Filter size 600 x 500 x 50 - 12 required
OPA 2110 Filters (rated EU4) - 16 required in total:
Filter size 500 x 500 x 50 - 12 required Filter size 600 x 500 x 50 - 4 required

ANTI-VIBRATION MOUNTS (Rubber) : 060-000-170 for OPA 116­201 (set of 4)
CONDENSATE DRAIN TUNDISH (25 OD/21 ID) : 060-000-653 for OPA 250­560, 970 outdoor section (set of 2)
* Note: These accessories are for fitting in the field. Filter sizes are nominal; refer to Temperzone for actual measurements.

16

www.temperzone.biz

1 September 2024

t CONTENTS

Air Conditioning

Packaged Systems ­ Accessories (cont'd)

ITEM NO.

DESCRIPTION

201-000-867

SERVICE INTERFACE DISPLAY (pGDN1)
Wired remote for OPA units with Carel c.pCO Controller. Up to 50m separation using telephone cable (RJ11), or up to 200m using AWG24 shielded cable and card adaptor (not supplied). Setpoint, humidity, schedule, operating pressures, superheat, compressor amps, alarms, etc and status can be read from its various display screens, including history. No need to connect gauges.
Service Inferface Display (excl. cable)

VIKING CONTROLLER (factory fitted) for OPA units with economisers/variable capacity fans and/or compressors SMT-920 Viking Controller (Factory fitted only) c/w Outdoor Temperature/Humidity sensor fitted and Room Temp. t/stat supplied loose
Optional: Air Quality Sensor (CO2 sensor)

201-000-700

WIFI SERVICE UTILITY (WSU) for use with units fitted with UC6/UC7/UC8 Controllers
View a unit's operating data using a WiFi connection and web browser on your mobile device. Data is viewed in real time and can be used to record commissioning status and diagnose operational faults. A running history can also be retrieved.
WiFi Service Utility (WSU)

Vertical Packaged Units - Ducted Reverse Cycle

The VPA is designed to operates in cold South Island conditions; down to ­15°C. Features a digital compressor for variable capacity and an EC plug fan with 0­10V control, low start-up current and on-site adjustable fan inlet/outlet positions.

ITEM NO. 520-291-011

MODEL VPA 160RKTGV

NOMINAL COOLING
kW 2~16.1

NOMINAL HEATING
kW 2~16.2

Note: Not a stock item. Includes UC8 and TZT-100 Controller. BMS connectivity via Modbus or RS425.

OPTIONS Cabinet colour to suit Different filter types Water heating module
Not a Stock Item. Made to order.

1 September 2024

www.temperzone.biz

17

Air Conditioning

t CONTENTS

Packaged Units - Ducted Water Cooled

The low profile HWP Series ducted water cooled packaged air conditioners are ideal for multi-unit installations such as high-rise offices, hotels, apartments and multiple-tenancies. Compact and reliable, these units can be installed above ceiling, or in other concealed spaces, saving valuable floor space and providing conditioned air direct to necessary locations.
The units are designed to be used with simple, short duct layouts.
HWP 36­275 models include high efficiency Thermoshell® technology for improved non-fouling water properties and greater range of water supply temperatures and water flows.
HWP 36­275 (UC8) models are compatible with the optional SAT-3 or TZT-100 Room Thermostats. UC8 controller based models have the ability to connect to water circulating pumps and flow control valves, so when the unit is cooling a signal will control the valve to obtain an optimum condensing pressure and temperature (and only when needed thereby reducing pump running costs). UC8 also supplies operating conditions and fault codes to TZT-100 or BMS systems.
These new systems are MEPS compliant, ie they meet the Minimum Energy Performance Standards set out in AS/NZS 3823.2:2013 and use refrigerant R410A.

ITEM NO.
509-036-102 509-048-102 509-059-102 509-079-102 509-098-102 509-118-102 509-142-102 509-172-102 509-192-102 509-255-102 509-275-102 508-591-201 508-631-201
509-036-001 509-048-001 509-059-001 509-079-001 509-098-001 509-118-001 509-142-001 509-172-001 509-192-001 509-255-001 509-275-001 507-581-201 507-621-201

MODEL

NOMINAL COOLING
kW

NOMINAL HEATING
kW

COOLING WITH ELECTRIC HEAT:

HWP 36CEKS (8)

3.5

HWP 48CEKS (8)

4.4

HWP 59CEKS (8)

5.9

HWP 79CEKS (8)

8.1

HWP 98CEKS (8)

9.9

HWP 118CEKT (8) 12.2

HWP 142CEKT (8) 14.7

HWP 172CEKT (8) 18.5

HWP 192CEKT (8) 21.2

HWP 255CEKT (8) * 25.5

HWP 275CEKT (8) * 27.5

HWP 370CEKTN * 36.6

HWP 445CEKTN * 44.5

2.0 2.0 3.0 4.0 4.0 6.0 6.0 9.0 9.0 12.0 12.0 18.0 24.0

REVERSE CYCLE: HWP 36RKS (8) HWP 48RKS (8) HWP 59RKS (8) HWP 79RKS (8) HWP 98RKS (8) HWP 118RKT (8) HWP 142RKT (8) HWP 172RKT (8) HWP 192RKT (8) HWP 255RKT (8) * HWP 275RKT (8) *
HWP 370RKTN *
HWP 445RKTN *

3.5 4.4 5.9 8.1 9.9 12.2 14.7 18.5 21.2 25.5 27.5 36.7 44.5

3.6 4.6 5.4 8.9 11.1 11.9 14.8 16.4 18.6 23.3 24.5 34.9 42.2

MraEtPeSd

Note: * Not a Stock Item; made-to-order. (8) Includes UC8 controller. BMS connectivity via Modbus/RS485 port.
Optional SAT-3 Room Thermostat (HWP 36­275 only) (refer p.21) Optional TZT-100 Room Thermostat (HWP 36-275) (refer p.21) Above models are complete with spring mounts. Filters (rated EU2/G2) are supplied on HWP 36­275 models only; a filter-integrated R/A spigot (Filter Box) is available for all other models. Water hoses included: HWP 36­142 models 600 mm lg, HWP 172­275 800mm lg. HWP 370/445 units do not include water hoses. HWP 36­98 models require single phase power supply; HWP 118+ require three phase. HWP 370/445 models require a 230 volt controller (not available from Temperzone). Opposite Hand versions available. Refer page 30 for Accessories.

Nomenclature HWP Suffixes: R ­ Reverse cycle system C ­ Cooling only system E ­ Electric heat K ­ Refrigerant R410A S ­ Single phase power supply T ­ Three phase power supply F ­ Inverter compressor
18

www.temperzone.biz

1 September 2024

t CONTENTS

Air Conditioning

Packaged Units - Ducted Water Cooled

HWPSY Eco models include high efficiency EC motors and therefore have higher EER/COP ratings. Fan speed can be variably controlled directly by a BMS system, via a 0­10V signal.
The low profile HWP Series ducted water cooled packaged air conditioners are ideal for multi-unit installations such as high-rise offices, hotels, apartments and multiple-tenancies. Compact and reliable, these units can be installed above ceiling, or in other concealed spaces, saving valuable floor space and providing conditioned air direct to necessary locations.
The units are designed to be used with simple, short duct layouts.
HWP 36­275 models include high efficiency Thermoshell® technology for improved non-fouling water properties and greater range of water supply temperatures and water flows.
HWP 36­275 (UC8) models are compatible with the optional SAT-3 or TZT-100 Room Thermostats. UC8 controller based models have the ability to connect to water circulating pumps and flow control valves, so when the unit is cooling a signal will control the valve to obtain an optimum condensing pressure and temperature (and only when needed thereby reducing pump running costs). UC8 also supplies operating conditions and fault codes to TZT-100 or BMS systems.
These new systems are MEPS compliant, ie they meet the Minimum Energy Performance Standards set out in AS/NZS 3823.2:2013 and use refrigerant R410A.

ITEM NO.
510-036-102 510-048-102 510-059-102 510-079-102 510-098-102 510-118-102 510-142-102 510-172-102 510-192-102 510-255-102 510-275-102
510-036-001 510-048-001 510-059-001 510-079-001 510-098-001 510-118-001 510-142-001 510-172-001 510-192-001 510-255-001 510-275-001

MODEL

NOMINAL COOLING
kW

NOMINAL HEATING
kW

COOLING WITH ELECTRIC HEAT:

HWP 36CEKSY *

3.5

2.0

HWP 48CEKSY *

4.4

2.0

HWP 59CEKSY *

5.9

3.0

HWP 79CEKSY *

8.1

4.0

HWP 98CEKSY *

9.9

4.0

HWP 118CEKTY * 12.2

6.0

HWP 142CEKTY * 14.7

6.0

HWP 172CEKTY * 18.5

9.0

HWP 192CEKTY * 21.2

9.0

HWP 255CEKTY * 25.5

12.0

HWP 275CEKTY * 27.5

12.0

REVERSE CYCLE:

HWP 36RKSY

3.5

3.7

HWP 48RKSY

4.4

4.6

HWP 59RKSY

5.9

5.4

HWP 79RKSY

8.1

8.9

HWP 98RKSY

9.9

11.3

HWP 118RKTY

12.2

11.6

HWP 142RKTY

14.7

14.5

HWP 172RKTY

18.5

16.7

HWP 192RKTY

21.2

18.6

HWP 255RKTY * 25.5

23.3

HWP 275RKTY * 27.5

24.5

MraEtPeSd

Note: * Not a Stock Item; made-to-order. Includes UC8 controller. BMS connectivity via Modbus/RS485 port. Optional SAT-3 Room Thermostat (refer p.21) Optional TZT-100 Room Thermostat (refer p.21) Above models are complete with spring mounts. Filters (rated EU2/G2) are supplied. Water hoses included: HWP 36­142 models 600 mm lg, HWP 172­275 800mm lg. HWP 36­98 models require single phase power supply; HWP 118+ require three phase. Opposite Hand versions available. Refer page 31 for Accessories.

Nomenclature HWP Suffixes: R ­ Reverse cycle system C ­ Cooling only system E ­ Electric heat K ­ Refrigerant R410A S ­ Single phase power supply T ­ Three phase power supply F ­ Inverter compressor Y ­ EC motor

1 September 2024

www.temperzone.biz

19

Air Conditioning

t CONTENTS

Packaged Units - Ducted Water Cooled - Accessories

ITEM NO.

MODEL

507-003-009 507-003-010 507-003-011
119-000-049 119-000-050
201-000-146 201-000-074 201-000-075 201-000-077

CONDENSATE LIFT-PUMP KIT: for HWP 36­59 for HWP 79­275 for HWP 370, 445

FILTERS (washable synthetic fibre EU2/G2):

for HWP 370 - 2 required

$ 39 ea.

for HWP 445 - 2 required

$ 41 ea.

temperzone SAT-3 ROOM TEMPERATURE CONTROLLER :
for HWP 36­275 (c/w UC8) Interface cable - 10m (4 core shielded twisted pair) Interface cable - 20m (4 core shielded twisted pair) Interface cable - 30m (4 core shielded twisted pair)
Refer page 12 for sensor and other accessories.

201-000-350 201-000-074 201-000-075 201-000-077

temperzone TZT-100 THERMOSTAT :
for HWP 36­275 (c/w UC8) Interface cable - 10m (4 core shielded twisted pair) Interface cable - 20m (4 core shielded twisted pair) Interface cable - 30m (4 core shielded twisted pair)
Refer page 10 for sensor accessories.

SPARE PARTS 201-000-023 201-000-412

HWP Protection Board UC8 Controller 24V (Hydronics)

119-000-098 119-000-086 119-000-084 119-000-097 119-000-099 119-000-100 119-000-103 119-000-104 119-000-105

REPLACEMENT FILTER (washable synthetic fibre EU2/G2):
for HWP 36, 48 for HWP 59 for HWP 79, 98 for HWP 118 for HWP 142 for HWP 172 for HWP 192 for HWP 255 for HWP 275 - 2 required

WARRANTY Standard Warranty as per General Conditions of Sale (page 4)

20

www.temperzone.biz

1 September 2024

t CONTENTS

Air Conditioning

Packaged Units - Ducted WR3a2ter Cooled

CWP Econex model is a closet version of the HWP, but with a variable capacity inverter compressor and built-in water pump. They include high efficiency EC motors. Fan speed can be variably controlled directly by a BMS system, via a 0­10V signal.

ITEM NO. 573-009-002

MODEL

NOMINAL COOLING
kW

NOMINAL HEATING
kW

REVERSE CYCLE WITH ELECTRIC HEAT:

CWP 90RELSFY

4.1~10.0

3.7~8.9

Note: Not a Stock Item; made-to-order. Includes UC8 controller. BMS connectivity via Modbus/RS485 port. Optional TZT-100 Room Thermostat (refer p.29)(Not suitable for SAT-3). Filters (rated EU2/G2) are supplied. Water hoses included: 600 mm lg. Requires single phase power supply.

The CWP Series ducted water cooled packaged air conditioners are ideal for multi-unit installations such as high-rise offices, hotels, apartments and multiple-tenancies. The units are designed to be used with simple, short duct layouts.
CWP 90 model includes high efficiency Thermoshell® technology with non-fouling water properties and a wide range of water supply temperatures and water flows. Electric elements are included in the air stream as a backup for when supply water temperature is too low.
CWP 90 (c/w UC8) can be connected to water circulating pumps and flow control valves, so when the unit is cooling a signal will control the valve to obtain an optimum condensing pressure and temperature (and only when needed thereby reducing pump running costs). UC8 supplies operating conditions and fault codes to TZT-100 or BMS systems.
These new systems are MEPS compliant, ie they meet the Minimum Energy Performance Standards set out in AS/NZS 3823.2:2013 and use refrigerant R32 which has a low GWP.
MraEtPeSd

1 September 2024

www.temperzone.biz

21

Air Conditioning

t CONTENTS

Chilled Water Fan Coil Units (IMDL Series)

Fan coil units are an integral part of an overall air conditioning system where the energy transfer medium (i.e. chilled or hot water) is circulated by a central plant facility. temperzone offers an extensive range of ducted fan coil units. A variety of options and accessories are available to meet most air conditioning requirements. Low operating cost, energy efficient fan motors are used in all units. Easy installation and maintenance add to the cost effectiveness of temperzone IMDL Series fan coil units. New IMDL 'Y' versions include high efficiency EC motors with higher static performance and optional 0-10V speed control.
IXDL Series
Incorporating multiple EC fans (1 to 5) within each unit, IXDL multi-zone fan coil units allows you to set different temperatures for different rooms within the same building simultaneously. IXDL units are made-to-order. Refer your temperzone representative for more info. or visit www.temperzone.biz

ITEM NO.
313-171-001 313-371-001 313-571-001 313-771-001

MODEL
IMDL 40-H 3/1 IMDL 60-H 3/1 IMDL 90-H 3/1 IMDL 130-H 3/1

NOMINAL AIR FLOW
205 l/s 335 l/s 480 l/s 650 l/s

ELECTRIC HEAT
­ ­ ­ ­

c/w ELECTRIC HEAT (instead of heating coil; w/o SSR) :

313-151-006

IMDL 40-H 4E

205 l/s

1.5 kW

313-351-006

IMDL 60-H 4E

335 l/s

2 kW

313-551-006

IMDL 90-H 4E

480 l/s

3 kW

313-751-006

IMDL 130-H 4E

650 l/s

4 kW

c/w EC MOTORS :
313-171-701 313-371-701 313-571-701 313-771-701

IMDL 40Y 3/1 IMDL 60Y 3/1 IMDL 90Y 3/1 IMDL 130Y 3/1

200 l/s 325 l/s 400 l/s 700 l/s

c/w EC MOTOR & ELECTRIC HEAT* (instead of heating coil; c/w SSR) :

313-151-806

IMDL 40Y 4E

205 l/s

1.5 kW

313-351-806

IMDL 60Y 4E

335 l/s

2 kW

313-551-806

IMDL 90Y 4E

400 l/s

3 kW

313-751-806

IMDL 130Y 4E

650 l/s

4 kW

Note: All of the above units are Stock Items. Units are right handed and fitted with: high (-H) capacity or EC (-Y) motors, return air plenum and filter. * EC motor versions with elec. heat come with SSR using 24V ac control (customer supplied)

ACCESSORIES (Supplied separately)

060-000-629 060-000-630 060-000-631

FLEXIBLE HOSES: for Heating coil, all models: 13 FPT (1/2") 600mm lg 3000psi
for Cooling coil, IMDL 40/60: 20 FPT (3/4") 600mm lg 1500psi
for Cooling coil, IMDL 90/130: 25 FPT (1") 800mm lg 1500psi

313-001-007 313-201-007 313-401-007 313-601-007

MULTI-OUTLET SPIGOT: for IMDL 40 (200 dia. x 2) for IMDL 60 (250 dia. x 2) for IMDL 90 (250 dia. x 3) for IMDL 130 (250 dia. x 4)

REPLACEMENT FILTERS (rated EU2) :

119-128-001

for IMDL 40 (545 x 236)

119-129-001

for IMDL 60 (795 x 236)

119-130-001

for IMDL 90 (1045 x 243)

119-131-001

for IMDL 130 (725 x 243) - 2 req'd

Note: Fan coil units are also available Made-to-Order with the following options:
Standard, Medium or High capacity motors (for non-EC motor versions) 3 row Cooling + 1 row Heating 3 row or 4 row Cooling Only, with or without Electric Heat. Standard Multi-Outlet Spigot Left or Right handed Electric Heat with solid state relay (SSR) for non-EC motor versions

22

www.temperzone.biz

1 September 2024

t CONTENTS

Air Conditioning

Chilled Water Fan Coil Units (IMD Series)

Fan coil units are an integral part of an overall air conditioning system where the energy transfer medium (i.e. chilled or hot water) is circulated by a central plant facility.
temperzone offers an extensive range of ducted fan coil units. A variety of options and accessories are available to meet most air conditioning requirements.
Low operating cost, energy efficient fan motors are used in all units. Easy installation and maintenance add to the cost effectiveness of temperzone IMD Series fan coil units.
New IMD 'Y' versions include high efficiency EC motors with higher static performance and optional 0-10V speed control.

ITEM NO.
315-311-001 315-381-001 315-451-001 315-521-001 315-591-001 315-661-001 315-731-001
315-311-601-SPE 315-381-601-SPE 315-451-601-SPE 315-521-601-SPE 315-591-601-SPE 315-661-601-SPE 315-731-601-SPE

MODEL

NOMINAL AIR FLOW

IMD 95 4/1 IMD 135 4/1 IMD 170 4/1 IMD 210 4/1 IMD 280 4/1 IMD 420 4/1 * IMD 550 4/1 *

450 l/s 600 l/s 750 l/s 900 l/s 1250 l/s 1800 l/s 2340 l/s

EC motor versions:

IMD 95Y 4/1

450 l/s

IMD 135Y 4/1

600 l/s

IMD 170Y 4/1

750 l/s

IMD 210Y 4/1

900 l/s

IMD 280Y 4/1

1250 l/s

IMD 420Y 4/1

1800 l/s

IMD 550Y 4/1

2340 l/s

Note: * Not a Stock Item. Coils are 4 row cooling + 1 row heating IMD(Y) fan coil units are also available with the following coil configurations:
4 - Four row for cooling or heating 4/E - Four row cooling + electric heat 12 Months Parts & Labour Warranty; Extended Warranty available

ACCESSORIES (Supplied separately)

325-121-005 325-231-005 325-271-005 325-311-005 325-351-005 325-431-005 325-591-005

FILTER BOX c/w filter rated EU2/G2 :
for IMD 95 for IMD 135 for IMD 170 for IMD 210 for IMD 280 for IMD 420 for IMD 550

307-161-101 307-341-101
060-000-629 060-000-631 060-000-631 060-000-632 060-000-632

SPRING MOUNTING KIT : for IMD 95­420 (No.2) for IMD 550 (No.3)
FLEXIBLE HOSES: for Heating coil, IMD 95­210: 13 FPT (1/2") 600mm lg 3000psi for Cooling coil, IMD 95­210 25 FPT (1") 800mm lg 1500psi for Heating coil, IMD 280: 25 FPT (1") 800mm lg 1500psi for Cooling coil, IMD 280­550: 32 FPT (1 1/4") 1300mm lg 1000psi for Heating coil, IMD 420, 550: 32 FPT (1 1/4") 1300mm lg 1000psi

1 September 2024

www.temperzone.biz

23

Air Conditioning

t CONTENTS

Chilled Water Fan Coil Units (GMW Series)

GMW fan coil units are an integral part of an overall air conditioning system where the energy transfer medium (i.e. chilled or hot water) is circulated by a central plant facility.
These underceiling models are ideal for fixed ceiling installations, don't take up valuable wall space and are relatively easy to relocate. Suitable for use in department stores, offices, classrooms, institutions, etc.
Low operating cost, energy efficient fan motors are used in all units. Easy installation and maintenance add to the cost effectiveness of temperzone GMW Series fan coil units.

ITEM NO.
318-141-001 318-191-001 318-281-001 318-401-001 318-491-001

MODEL
GMW 50-H 2/1 GMW 70-H 2/1 GMW 80-H 2/1 GMW 140-H 2/1 GMW 160-H 2/1

NOMINAL AIR FLOW
175 l/s 240 l/s 375 l/s 625 l/s 815 l/s

Note: All of the above units are stock items. GMW fan coil units are also available with the following options:
Standard or High capacity motors 2 row Cooling + 1 row Heating 3 row Cooling

24

www.temperzone.biz

1 September 2024

t CONTENTS

Air Conditioning

Chilled Water Air Handling Units (IJD Series)

Air Handling units are an integral part of an overall air conditioning system where the energy transfer medium (i.e. chilled or hot water) is circulated by a central plant facility.
temperzone offers an extensive range of belt driven ducted air handling units. A variety of options and accessories are available to meet most air conditioning requirements.
Low operating cost, energy efficient fan motors are used in all units. Easy installation and maintenance add to the cost effectiveness of temperzone IJD Series air handling units.
temperzone also offers an extensive range of robust custom made air handling units under the Clever brand, up to 23,500 l/s (MC Series).

MODEL
IJD 370 IJD 450 IJD 620 IJD 950 IJD 1400 IJD 2000 IJD 2400

NOMINAL AIR FLOW
1500 l/s 1800 l/s 2400 l/s 3600 l/s 5500 l/s 7200 l/s 9300 l/s

Note: All IJD units are Made-to-Order. Horizontal or vertical supply air versions available.
Coil configurations available are:
4 - Four row for cooling or heating 4/1 - Four row cooling / one row heating 4/E - Four row cooling + electric heat
6 - Six row for cooling or heating 6/1 - Six row cooling / one row heating 6/E - Six row cooling + electric heat
1 - One row for heating E - Electric Heat only (no coil)

OPTIONS
Filters Polyester powder coat finish (Gull Grey). EC Plug fan versions

FILTERS (disposable, rated EU4) :

019-400-005
019-400-003
019-400-006
019-400-002 019-400-004
019-400-008 019-400-004
019-400-004
019-400-005

for IJD 370 600 x 500 x 50 - 2 required
for IJD 450 625 x 400 x 50 - 3 required
for IJD 620 625 x 500 x 50 - 3 required
for IJD 950 - 6 required in total 400 x 500 x 50 - 3 required 500 x 500 x 50 - 3 required
for IJD 1400 - 8 required in total 450 x 500 x 50 - 4 required 500 x 500 x 50 - 4 required
for IJD 2000 500 x 500 x 50 - 12 required
for IJD 2400 500 x 600 x 50 - 12 required

1 September 2024

www.temperzone.biz

25

Air Conditioning

t CONTENTS

Chilled Water Air Handling Units (MT Series)

Air Handling units are an integral part of an overall air conditioning system where the energy transfer medium (i.e. chilled or hot water) is circulated by a central plant facility.
MT Series units feature EC Plug fans and a light weight aluminium frame, thermal break panels and separable fan coil/plenum sections. A variety of options and accessories are available to meet most air conditioning requirements.
Energy efficient fan motors are used in all units. Easy installation and maintenance add to the cost effectiveness of Temperzone MT Series air handling units.
Temperzone also offers an extensive range of robust custom made air handling units, up to 23,500 l/s (MC Series).

MODEL
MT 030 MT 060 MT 120 MT 180 MT 270 MT 360 MT 450 MT 540

NOMINAL AIR FLOW
750 l/s 1 500 l/s 3 000 l/s 5 000 l/s 7 500 l/s 10 000 l/s 12 500 l/s 15 000 l/s

Note: All MT units are Made-to-Order on relatively short lead times Horizontal or vertical supply air versions available, as well as LH/RH versions.
Coil configurations available are:
2 - Two row heating 4 - Four row for cooling or heating 4/1 - Four row cooling / one row heating 6 - Six row for cooling or heating 6/1 - Six row cooling / one row heating 8 - Eight row cooling
OPTIONS
Filters: G4 panels, F7 bags or F9 cartridges. Polyester powder coat finish (Titania). Return air/outside air mixing dampers. Magnahelic guage, internal lighting, inspection window. MC Series ­ custom built range.

26

www.temperzone.biz

1 September 2024

t CONTENTS

WaAteirr CCoonnddiittiioning

Heat Pump Water Heaters

MWS Potable units are Single Pass systems providing 62°C hot water. Use R32 low GWP refrigerant. An in-built BDLC pump is included. Liquid injection compressor technology is standard for improved performance at low ambient conditions.
Rating conditions: 7/6 °C db/wb outdoor ambient; EWT 30°C; LWT 45°C
MWH Space Heating units include variable capacity inverter compressors ­ enabling close temperature control. Use R32 low GWP refrigerant. A pump is optional. EVI version (V) is recommended for improved performance at low ambient conditions.
Rating conditions: 7/6 °C db/wb outdoor ambient; EWT 30°C; LWT 45°C
MWU Underfloor units include a variable capacity inverter compressor ­ enabling close temperature control. Inverters provide additional economy at part load. Uses R410A refrigerant. Includes integrated BDLC pump (8m head).
Rating conditions: 7/6 °C db/wb outdoor ambient; EWT 25°C; LWT 35°C
MWP Pool units include a titanium Thermoshell®. Use R410A refrigerant. TZT100 Controller supplied. A pump is not included.
Rating conditions: 25/18 °C db/wb outdoor ambient; EWT 25°C; LWT 28°C

Application Optimised Heat Pumps
Features: - Designed and manufactured for reliability and durability by Temperzone in NZ. - Highly efficient, cost effective integrated water heating systems - Fouling resistant ThermoShell® heat-exchanger - In-line inverter systems for space heating and cooling for maximum energy savings - Elimination of intermediate buffer tanks - Powerful yet quiet, compact design - Integrated 'turnkey' controls for suitable applications (eg LAT Control with MWH) - Integrated BLDC (variable speed) pump on some models - Local support and commissioning - BMS / Modbus connectivity
As all systems are application optimised. Contact temperzone for info on how to apply these models.

ITEM NO.
503-025-005 503-050-005 503-100-005

DESCRIPTION

NOMINAL HEATING
kW

CAPACITY RANGE kW

POTABLE MODELS (SINGLE PASS):

Three Phase:

MWS 250LT

20.0

MWS 500LTM

40.0

MWS 1000LTM

74.0

503-090-501 503-090-511
503-090-505 503-090-515
503-200-505 503-200-515

SPACE HEATING MODELS:

Three Phase:

MWH 900LTM-PC

77.5

MWH 900LTM-C (w/o pump)

MWH 900LTM-PCV

89.3

MWH 900LTM-CV (w/o pump)

MWH 2000LTM-CE (wop) 140.0 MWH 2000LTM-CEV (wop) 154.3

22.3 ~ 91.9
21 ~ 105
14 ~ 205 14 ~ 224

502-018-101
502-025-101 502-045-101
349-000-975

UNDERFLOOR MODELS:

Single Phase:

MWU 180KS

15.8

Three Phase:

MWU 250KT

19.5

MWU 450KT

37.0

Accessories: Expansion Tank, Statico SD 8.3, 8L

3.8 ~ 19.5
4.7 ~ 19.5 8.9 ~ 48.5

Suffix Nomenclature K ­ Refrigerant R410A L ­ Refrigerant R32 S ­ Single phase power supply T ­ Three phase power supply M ­ Multiple compressors P ­ Internal Pump C ­ Advanced Controller (PLC) E ­ EC Condenser fans V ­ Electronic Vapour Injection (EVI)
1 September 2024

502-023-201
502-025-201 502-040-201
060-000-437

POOL HEATING MODELS:

Single Phase:

MWP 230KS

26.0

Three Phase:

MWP 250KT

27.5

MWP 400KT

42.5

ACCESSORY (All models): Drain Adaptor Kit (25OD/21ID)

Note Commissioning by Temperzone. Complete our Sales Enquiry form prior to ordering.
WARRANTY 2 years Parts & Labour. Also available: pumps, expansion & storage tanks, auto-fill kit, water flow valves.

www.temperzone.biz

27

Air Distribution

t CONTENTS

Radial Swirl Diffusers

ITEM NO.
122-600-001
122-935-150 122-935-200 122-935-250 122-935-300
122-600-002
122-950-250 122-950-300 122-950-350 122-950-400
122-600-011
122-600-012

DESCRIPTION
SMARTEMP® Range (Fixed Helical):
HSC-FD-DN355-S595 355 dia. White 595 mm Square, lay-in half tile, excl. plenum Side entry plenum, Ø150 spigot * Side entry plenum, Ø200 spigot Side entry plenum, Ø250 spigot Side entry plenum, Ø300 spigot
HSC-FD-DN500-S595 500 dia. White 595 mm Square, lay-in half tile, excl. plenum Side entry plenum, Ø250 spigot Side entry plenum, Ø300 spigot Side entry plenum, Ø350 spigot Side entry plenum, Ø400 spigot *
HSC-FD-DN355-C500 355 dia. White Round, 500 mm OD, excl. plenum
HSC-FD-DN500-C710 500 dia. White Round, 710 mm OD, excl. plenum

Note: * Made-to-order Collars, 2-way and 3-way inserts; made-to-order.

Ask your temperzone representative about other SmarTemp® products available.

ISF-AD Floor Swirl Outlet

CNW-AD Circular Nozzle Outlet

PMW-AD Perforated Mainstream Diffuser

LMC-AD Linear Mainstream
Ceiling Diffuser

28

www.temperzone.biz

1 September 2024

t CONTENTS

Air Distribution

RPD - Round Plastic Ceiling Diffusers

ITEM NO.
133-000-150 133-000-200 133-000-250

DESCRIPTION
Round Plastic Diffuser Round Plastic Diffuser Round Plastic Diffuser

SIZE (mm)
150 dia. 200 dia. 250 dia.

Grilles

ITEM NO.

DESCRIPTION

SIZE (mm)

121-106-150 121-106-200 121-106-250 121-106-300 121-106-400 121-106-550 121-201-300 121-201-400 121-201-512 121-900-450 119-088-001 119-090-001 119-087-001 119-089-001

EGC-5

150 x 150

EGC-5

200 x 200

EGC-5

250 x 250

EGC-5

300 x 300

EGC-5

400 x 400

EGC-5 lay-in

550 x 550

EGC-5 / HF *

300 x 300

EGC-5 / HF *

400 x 400

EGC-5 / HF * lay-in 512 x 512

EGC-5 / HF

900 x 450

Filter only

300 x 300

Filter only

400 x 400

Filter only

512 x 512

Filter only

850 x 400

* HF - Hinged Frame, including filter.

COLOUR
White White White White White White White White White White

Adaptors for Grilles

ITEM NO.

MODEL

SIZE (mm)

122-030-060 122-030-061 122-030-073 122-033-005 121-400-040 121-400-011 121-400-001 121-400-012 121-400-002 121-900-451

A15 A20 A30 * A33 * A40 A51a A51 A55a A55 A90

150 sq. to 150 dia. 200 sq. to 150/200 dia. 300 sq. to 200/250 dia. 300 sq. to 300 dia. 400 sq. to 300/350 dia. 512 sq. to 250/300 dia. 512 sq. to 350/400 dia. 550 sq. to 250/300 dia. 550 sq. to 350/400 dia. 900 x 450. to 2 x 350 dia.

All adaptors are made of black plastic, except A90 which is metal.

1 September 2024

www.temperzone.biz

29

Air Distribution Flexiduct

t CONTENTS

ITEM NO.

DESCRIPTION

SIZE

LENGTH

128-000-021 128-000-022 128-000-023 128-000-024

Flexiduct - Nude Flexiduct - Nude Flexiduct - Nude Flexiduct - Nude

150 mm dia.

3 m

200 mm dia.

3 m

250 mm dia.

3 m

300 mm dia.

3 m

128-000-121 128-000-122 128-000-123 128-000-124 128-000-125 128-000-126

Flexiduct - Insulated 150 mm dia.

3 m

Flexiduct - Insulated 200 mm dia.

3 m

Flexiduct - Insulated 250 mm dia.

3 m

Flexiduct - Insulated 300 mm dia.

3 m

Flexiduct - Insulated 350 mm dia.

3 m

Flexiduct - Insulated 400 mm dia.

3 m

128-000-222 128-000-223 128-000-224 128-000-225 128-000-226

Flexiduct - Insulated 200 mm dia.

6 m

Flexiduct - Insulated 250 mm dia.

6 m

Flexiduct - Insulated 300 mm dia.

6 m

Flexiduct - Insulated 350 mm dia.

6 m

Flexiduct - Insulated 400 mm dia.

6 m

Note: Above sizes are all stock items. Flexiduct has been tested at a NATA/Telarc certified laboratory to AS 4254 and complies with NZ Building Code - Fire Safety Amendment Regulations (April 2013).

Duct Tape Duct Joiners

ITEM NO.
127-000-040 127-000-042

DESCRIPTION
Duct Sealing Tape - 48 mm x 30 m - Plastic Duct Sealing Tape - 48 mm x 30 m - Silver Polyprop.

ITEM NO.
127-000-001 127-000-002 127-000-003 127-000-004 127-000-005

DESCRIPTION
Duct Joiner Duct Joiner Duct Joiner Duct Joiner Duct Joiner

Galvanised steel construction.

SIZE (mm)
150 dia. 200 dia. 250 dia. 300 dia. 350 dia.

30

www.temperzone.biz

1 September 2024

t CONTENTS

Air Distribution

Air Regulating Damper (TRD Series)
Dimensions Width: 300­2000 mm Height: 200­ 1200 mm
Note: All dampers are opposed blade rotation only. One axle and actuator mounting plate per damper is included. Mill finish only. Not a Stock Item. Manufactured to order.
OPTIONS Electric actuators Multiple section dampers to cover larger sizes than tabled above Polyester powder coat or anodised finish Locking Quadrant (factory fitted)

1 September 2024

www.temperzone.biz

31

Ventilation
In-Line Centrifugal Fans
ITEM NO.
084-002-001 084-005-001 084-007-001 084-009-001 084-010-001

MODEL
AXC 100B AXC 150A AXC 200A AXC 250 AXC 315A

DIA. (mm)
100 150 200 250 315

SPEED R.P.M.
2400 2500 2550 2650 2650

ITEM NO.
084-005-002 084-007-002 084-009-002 084-010-002

DESCRIPTION

Duct Clamp

"

"

"

"

"

"

DIA. (mm)
150 200 250 315

t CONTENTS

084-010-003

AXC 315­300 adaptor 315

084-001-005 084-001-006

AXC Electronic Controller R15 AXC Electronic Controller - flush box

32

www.temperzone.biz

1 September 2024

t CONTENTS

AOirthCeornPdritoiodnuicntgs

Circulating Water Pumps

HVAC Application: Hot-water heating systems of all kinds, air-conditioning applications, industrial circulation systems.
Glandless Pumps. Powerful, energy-efficient, easy-maintenance, reliable
ZRS & Star ­ suited to residential and light commercial applications; sanitary circulators; bronze

ITEM NO.

DESCRIPTION

070-000-484

ZRS (Sanitary) ZRS 15/6 Ku P (Replaces previous model Intec Z)

ZRS

Stratos PICO-Z

Varios ­ The most compatible replacement solution for all applications thanks to it's revolutionary design and the Sync function, which allows the installer to duplicate the previous pump settings into the new pump

Varios

070-001-033 070-001-034

Stratos PICO-Z (Sanitary) Stratos PICO-Z 25/1-6 Stratos PICO-Z 20/1-6 (Replaces previous model Star Z)

Varios PICO

070-001-005 070-001-004 070-001-037

Varios PICO 15/1-7 Varios PICO 25/1-7 Varios PICO 25/1-7-130 Other sizes available

349-000-832 349-000-825 349-000-831 349-000-829 349-000-833 349-000-827 349-000-830

Unions: 20mm Steel Unions 25mm Cast Iron Unions 32mm Cast Iron Unions 15mm Bronze Unions 20mm Bronze Unions 25mm Bronze Unions 32mm Bronze Unions

WARRANTY 2 Years Parts only.

Visit www.wilo.com for Wilo pump replacement guide here or contact Temperzone for assistance.

1 September 2024

www.temperzone.biz

33

AOitrhCeroPndroitdiouncitnsg

Circulating Water Pumps

HVAC Application: Hot-water heating systems of all kinds, air-conditioning applications, industrial circulation systems.
Glandless Pumps. Powerful, energy-efficient, easy-maintenance, reliable
Yonos ­ particularly suited to radiators or underfloor heating

ITEM NO.
070-001-006 070-001-009 070-001-007 070-001-010 070-001-011 070-001-032 070-001-604 070-001-605 070-001-606 070-001-607 070-001-608 070-001-609 070-001-610 070-001-611 070-001-612 070-001-613

DESCRIPTION
Yonos MAXO Yonos MAXO 25/0.5-7 Yonos MAXO 25/0.5-10 Yonos MAXO 25/0.5-12 Yonos MAXO 30/0.5-7 Yonos MAXO 30/0.5-10 Yonos MAXO 30/0.5-12 Yonos MAXO 40/0.5-8 PN6/10 Yonos MAXO 40/0.5-12 PN6/10 Yonos MAXO 40/0.5-16 PN6/10 Yonos MAXO 50/0.5-8 PN6/10 Yonos MAXO 50/0.5-12 PN6/10 Yonos MAXO 65/0.5-9 PN6/10 Yonos MAXO 65/0.5-12 PN6/10 Yonos MAXO 80/0.5-6 PN10 Yonos MAXO 80/0.5-12 PN10 Yonos MAXO 100/0.5-12 PN10

070-001-043 070-001-042 070-001-003 070-001-002

Yonos MAXO-Z (Sanitary) Yonos MAXO-Z 25/0.5-7 PN10 Yonos MAXO-Z 25/0.5-10 PN10 Yonos MAXO-Z 30/0.5-7 PN10 Yonos MAXO-Z 30/0.5-12 PN10

INFO LINK *
2120639 2120640 2120641 2120642 2120643 2120644 2120646 2120647 2120648 2120649 2120651 2120653 2120654 2120657 2120659 2120661
2175538 2175539 2175540 2175541

TOP-Z ­ hot-water heating systems of all kinds, air-conditioning systems, closed cooling circuits, industrial circulation systems.
Bronze housing.

070-001-082 070-001-080 070-001-084 070-001-086 070-001-087 070-001-088

TOP-Z (Sanitary) TOP-Z 25/6 (3~) PN10 TOP-Z 25/10 (3~) PN10 TOP-Z 30/7 (3~) PN10 TOP-Z 30/10 (3~) PN6/10 TOP-Z 40/7 (3~) PN6/10 TOP-Z 50/7 (3~) PN6/10

2045522 2175509 2048341 2175512 2175516 2175522

* Click Article number for detailed product info from Wilo.com WARRANTY 2 Years Parts only.

t CONTENTS

Visit www.wilo.com for Wilo pump replacement guide here or contact Temperzone for assistance.
34

www.temperzone.biz

1 September 2024

t CONTENTS

AOirthCeornPdritoiodnuicntgs

Circulating Water Pumps

TOP-S ­ hot-water heating systems of all kinds, air-conditioning systems, closed cooling circuits, industrial circulation systems.
Cast Iron housing.

ITEM NO.

DESCRIPTION

INFO LINK **

TOP-S *

070-001-113 TOP-S 25/7 (3~) PN10

2048321

070-001-114 TOP-S 25/10 (3~) PN10

2165521

070-001-115 TOP-S 25/13 (1~) PN10

2084440

070-001-116 TOP-S 25/13 (3~) PN10

2084441

070-001-118 TOP-S 30/4 (3~) PN10

2084012

070-001-120 TOP-S 30/7 (3~) PN10

070-001-121 TOP-S 30/10 (3~) PN10

070-001-122 TOP-S 40/4 (1~) PN6/10

070-001-123 TOP-S 40/4 (3~) PN6/10

070-001-125 TOP-S 40/7 (1~) PN6/10

070-001-126 TOP-S 40/7 (3~) PN6/10

070-001-127 TOP-S 40/10 (1~) PN6/10

070-001-136 TOP-S 50/10 (3~) PN6/10

070-001-137 TOP-S 50/15 (3~) PN6/10

070-001-138 TOP-S 65/7 (1~) PN6/10

070-001-139 TOP-S 65/7 (3~) PN6/10

070-001-140 TOP-S 65/10 (3~) PN6/10

070-001-141 TOP-S 65/13 (3~) PN6/10

070-001-142 TOP-S 65/15 (3~) PN6/10

070-001-144 TOP-S 80/7 (3~) PN6

070-001-145 TOP-S 80/10 (3~) PN6

070-001-146 TOP-S 80/15 (3~) PN6

070-001-147 TOP-S 100/10 (3~) PN6

* Check with availability with Temperzone Sales prior to ordering.

** Click Article number for detailed product info from Wilo.co

WARRANTY 2 Years Parts only.

Visit www.wilo.com for Wilo pump replacement guide here or contact Temperzone for assistance.

1 September 2024

www.temperzone.biz

35

AOitrhCeroPndroitdiouncitnsg

t CONTENTS

Pre-Insulated Pipe

Application: Thermal energy distribution, domestic hot and cold water piping; potable or geothermal. Flexible and easy to install.
Safest choice with homogeneous welding, one material, for increased reliability.
Electro-fusion weldable fittings or compression joiner system.
Range of connector fittings

ITEM NO.

DESCRIPTION

MIN. BEND RADIUS

029-000-446 029-000-447 029-000-448 029-000-449 029-000-453 029-000-450 029-000-463

Flexalen 600 pipe ­ single (casing/insert): Single 125/63 OD Single 160/75 OD Single 160/90 OD Single 200/110 OD End Cap - rubber 125/32­75 OD End Cap - rubber 160/50­90 OD End Cap - rubber 200/110 OD

0.8m 0.8m 1.0m 1.25m

029-000-464 029-000-465 029-000-466 029-000-467 029-000-451 029-000-452 029-000-454 029-000-455

Flexalen 600 pipe ­ twin (casing/insert): Twin 125/2x25 OD Twin 125/2x32 OD Twin 160/2x40 OD Twin 160/2x50 OD Twin 200/2x63 OD End Cap - rubber 125 / 2x25 OD or 2x32 OD End Cap - rubber 160 / 2x40 or 2x50 OD End Cap - rubber 200 / 2x63 OD

0.6m 0.6m 0.8m 0.8m 1.25m

060-000-508 060-000-509 060-000-510 060-000-511 060-000-512 060-000-513 060-000-514 060-000-515

Electro-fusion Joiner Parts: Coupler OD025 Coupler OD032 Coupler OD040 Coupler OD050 Coupler OD063 Coupler OD075 Coupler OD090 Coupler OD110

029-000-406 029-000-407 029-000-408 029-000-409 029-000-410 029-000-411 029-000-412

Elbow OD025 90° Elbow OD032 90° Elbow OD040 90° Elbow OD050 90° Elbow OD063 90° Elbow OD075 90° Elbow OD090 90°

36

www.temperzone.biz

1 September 2024

t CONTENTS

AOirtCheornPdritoiodnuicntgs

Pre-Insulated Pipe (cont'd)

ITEM NO.

DESCRIPTION

1 September 2024

029-000-413 029-000-414 029-000-415 029-000-416 029-000-417 029-000-418 029-000-419 029-000-420

Electro-fusion Joiner Parts (cont'd): Elbow OD110 45° Elbow OD110 90° Elbow OD 32 45° Elbow OD 40 45° Elbow OD 50 45° Elbow OD 63 45° Elbow OD 75 45° Elbow OD 90 45°

029-000-421 029-000-422 029-000-424 029-000-425 029-000-426 029-000-427 029-000-428

T 90° Equal OD 32 T 90° Equal OD 40 T 90° Equal OD 50 T 90° Equal OD 63 T 90° Equal OD 75 T 90° Equal OD 90 T 90° Equal OD 110

029-000-430 029-000-431 029-000-432 029-000-433 029-000-434 029-000-435 029-000-436 029-000-437 029-000-438 029-000-441 029-000-442 029-000-443

Reducer OD 32 > OD 25 Reducer OD 40 > OD 32 Reducer OD 50 > OD 40 Reducer OD 63 > OD 40 Reducer OD 63 > OD 32 Reducer OD 63 > OD 50 Reducer OD 75 > OD 63 Reducer OD 90 > OD 63 Reducer OD 90 > OD 75 Reducer OD 110 > OD 63 Reducer OD 110 > OD 75 Reducer OD 110 > OD 90

060-000-519 060-000-504 060-000-521
060-000-522 060-000-505 060-000-524
060-000-525 060-000-506 060-000-527

63 mm: Flange Adaptor* GF-BUNDBU63 Flange Backing Ring GP-LOSF63-10 Flange Seal GF-BUNDBU63 75 mm: Flange Adaptor* GF-BUNDBU75 Flange Backing Ring GP-LOSF75-10 Flange Seal GF-BUNDBU75 90 mm: Flange Adaptor* GF-BUNDBU90 Flange Backing Ring GP-LOSF90-10 Flange Seal GF-BUNDBU90

* To be used in conjunction with an Electrofusion Joiner Part

www.temperzone.biz

37

OAitrhCeroPnrdoitdiouncitnsg

t CONTENTS

Pre-Insulated Pipe (cont'd)

ITEM NO.

DESCRIPTION

060-000-528 060-000-507 060-000-530

Electro-fusion Joiner Parts (cont'd): 110 mm: Flange Adaptor* GF-BUNDBU110 Flange Backing Ring GP-LOSF110-10 Flange Seal GF-BUNDBU110

* To be used in conjunction with an Electrofusion Joiner Part

029-000-400 029-000-401 029-000-402 029-000-403 029-000-404

Compression Fittings: BCA OD 25 Male 2.3mm (C) BCA OD 32 Male 3.0mm BCA OD 40 Male 3.7mm BCA OD 50 Male 4.6mm BCA OD 63 Male 5.8mm

38

www.temperzone.biz

1 September 2024

t CONTENTS

AOirthCeornPdriotidouncintsg
Radiators (Econorad®)
High performance 'custom made' radiators are constructed from flat rectangular tubing which has low water resistance providing quick and uniform heat up. Output 150W up to 10,850W. Thermostatic Radiator Valves by Heimeier®. More info. click here.
Boilers by De Dietrich® & Gassero®
Gas Condensing and electric models ­ floor standing and wall hung types Natural gas, oil or electric. More info. click here.
Air Conditioning Units (Split Systems)
An extensive range of residential and commercial product types available including: wall mounts, floor mounts, ducted, casssettes, underceiling, multi-zone and VRF. A separate product catalogue is available on request, or visit www.hitachiaircon.co.nz

1 September 2024

www.temperzone.biz

39

REGISTERED
AS/NZS ISO 9001:
2015
SUPPLIER

Materials and specifications are subject to change without notice due to the manufacturer's ongoing research and development programme.

© temperzone ltd 2024

New Zealand
Adobe PDF Library 17.0 Adobe InDesign 19.5 (Macintosh)

Related Documents

Preview Temperzone Product Overview - Air Conditioning, Ventilation, and Heating Solutions
A comprehensive overview of Temperzone's product range, including air conditioning, water conditioning, air distribution, and ventilation & heating systems. Features detailed product specifications, item numbers, and application information.
Preview Temperzone Product Overview - HVAC Solutions for Air, Water, Ventilation & Heating
Explore Temperzone's comprehensive range of HVAC products, including advanced air conditioning systems, efficient water heaters, air distribution components, ventilation solutions, and more. Featuring Hitachi Cooling & Heating products.
Preview Temperzone Ducted Packaged Units OPA 1410/1710/2110 Econex Series R32 Technical Data
Comprehensive technical data, specifications, performance charts, and features for Temperzone's OPA 1410, 1710, and 2110 Econex Series R32 ducted packaged rooftop air conditioning units, designed for commercial environments.
Preview Temperzone Water Cooled Packaged Units: Energy Efficient HVAC Solutions
Discover Temperzone's advanced Water Cooled Packaged Units, featuring energy-efficient ThermoShell® technology for superior performance and cost savings. Explore HWP and CWP series for flexible, reliable climate control solutions.
Preview Temperzone OPA 2110 Econex R32 Ducted Packaged Units Part Load Data
Detailed performance and part load data for the Temperzone OPA 2110 Econex R32 ducted packaged air conditioning unit, including cooling and heating capacities.
Preview Temperzone Water Cooled Packaged Units: Energy Efficient HVAC Solutions
Discover Temperzone's advanced Water Cooled Packaged Units (HWP and CWP series). Featuring innovative ThermoShell® technology, these units offer superior energy efficiency, design flexibility, and cost savings for commercial and high-rise building applications.
Preview Temperzone OPA 211 Econex (Pro) R32 Ducted Packaged Units Part Load Data
Detailed performance data for Temperzone's OPA 211 Econex (Pro) R32 ducted packaged units, including cooling and heating capacities under various operating conditions, and indoor air flow correction factors.
Preview Temperzone HWP-K Series: Ducted Water Cooled R410A Packaged Air Conditioners Product Review
An overview of the Temperzone HWP-K Series ducted, water-cooled, R410A packaged air conditioners, detailing features, specifications, and application considerations for commercial and industrial HVAC systems.