MGA's Miniverse Make It Mini Lifestyle
Your Guide to Creating and Enjoying Your Mini Worlds
How to Play with Resin!
Think of your resin as glue. Use it to make everything stay in place. Note: When using as a base holder, make sure to expose resin to day light or any UV light to set it.
- To make it easier to pour, try keeping the bottle upside down, with the CAP ON, in a cup or bowl for at least 1 minute.
- When poured, resin will take a few seconds to drip or spread.
- Don’t overfill the containers with the resin – make sure you have enough room for your materials.
- If large bubbles appear when pouring, use the tip of the tweezers to pop them. (Note: The more you mix/stir the resin, the more bubbles that will appear.)
- While resin is still wet, using tweezers, take the time to carefully place all your items before taking it outside to set.
How to Play with Plants!
- Use the sand to make plants stay in place.
- Don’t overfill your pots.
- Use the provided trowel and tweezers to dig in the sand.
- You DO NOT need to place sand under UV or daylight. You can plant and repot your plants at anytime.
Make It & Set It
- Once you have your home decor prepped, place it under day light or UV light with a tray.
- Set the resin for at least 5 minutes or until resin has hardened.
- Only check if resin is hardened with the tweezers provided.
- Bring the home decor back indoors to cool down before touching it.
Storage & Display
Hanging Planter:
- Cut 3” (8 cm) of the cord and set aside.
- Thread the remaining long cord up through one handle and create a loop at the top by threading the cord back through the same handle.
- Continue to the next handle and repeat the looping process for all handles.
- Tie a knot with the ends of the long cord after passing through all the handles.
- Take the 3” cord and thread it through all 3 loops; tie a knot to hang on the hook.
Bird House / Bird Feeder:
- String the cord (A) through the top openings (B) of the bird house or bird feeder and tie a knot for hanging.
When You're Done...
- Clean all surfaces and equipment with alcohol wipes after use. Wipes not included.
- Store the product in a safe place and keep away from young children after play.
- Set any excess resin in bottle: Leave bottle open and place in direct sunlight for at least 5 minutes to set. Do not pour in drain.
Important Information & Warnings
Age: 8+
Not suitable for children under 8 years.
Adult Supervision Required
Conforms to ASTM D-4236
Read and follow instructions and safety guidelines before use.
- Cover the play area to prevent resin damage to surfaces.
- An adult must be present when playing with resin.
- Keep rubbing alcohol or wipes close by to clean up messes and your hands. Rubbing alcohol or wipes not included.
- It is highly recommended to wear gloves and eye protection while using resin. Gloves and eye protection not included.
- It is recommended to set resin in day light or any UV light. (Note: The intensity of the sun may vary depending on your location and time of day.)
- Caution: Very Warm – Resin under UV exposure.
- Avoid skin contact. Wash hands thoroughly after use.
- Avoid touching resin with fingers before the gel is completely dry. Always use the supplied tweezers.
- Avoid playing with resin with broken skin.
- Keep contents away from eyes.
- If irritation occurs, discontinue use.
- Use in a well-ventilated area.
- Avoid direct inhalation.
- Do not place and store in kitchen or other food storage area.
- Do not mix with real plants or flowers.
- Keep younger children under the specified age limit and animals away from the activity area.
- Do not eat, drink or smoke in the activity area.
- Children’s abilities vary, even within age groups. Supervising adults should use these instructions and exercise discretion as to which activities are suitable and safe for them.
- Contents, including specifications and colors, may vary from photos depicted.
Pro Tip
Resin still sticky after 5 minutes? Give it a little more time under the sun... the more sunlight it gets, the better it will set.
Warm up the resin by rubbing the bottle in-between your palms for a minute or more to make it easily pourable.
Contact Information
The preferred method of contact for Customer Service is through the e-mail contact form at www.mgae.com/contact.
For customer service in the UK: Tel: 0800 521 558, Email: ukconsumerservices@mgae.com
For customer service in the EU: Tel: +172-758-010, Email: klantenservice@mgae.com
For customer service in AU/NZ: Tel: 1 300 059 676, Email: au-sales@mgae.com
For customer service in Mexico: RFC: EBO160713IN7
For customer service in France: Tél. : 0 805 98 54 69, Email : aide@mgae.biz
For customer service in Spain: Tel: 900 997 941, Email: apoyo@mgae.biz
View Recipe Videos
To view recipe videos, visit miniverse.mgae.com
© 2023 MGA Entertainment, Inc. MGA’S MINIVERSETM/MC is a trademark of MGA in the U.S. and other countries. All logos, names, characters, likenesses, images, slogans, and packaging appearance are the property of MGA.
Patent pending. Printed in China.
File Info : application/pdf, 1 Pages, 1.06MB
DocumentDocumentReferences
Adobe PDF library 17.00 Adobe Illustrator 27.9 (Macintosh)Related Documents
![]() |
MGA's Miniverse Make It Mini Food Resin Crafting Guide Step-by-step instructions and safety guidelines for using MGA's Miniverse Make It Mini Food resin kits. Learn how to create miniature food items with UV-cured resin. |
![]() |
MGA's Miniverse Make It Mini Kitchen Instructions and Safety Guide A comprehensive guide for MGA's Miniverse Make It Mini Kitchen playset, including contents, assembly, resin play instructions, and safety precautions. |
![]() |
MGA's Miniverse Make It Mini Hello Kitty & Friends Series 2 Instructions Step-by-step instructions for assembling and playing with the MGA's Miniverse Make It Mini Hello Kitty & Friends Series 2 collectible items, including Pompompurin Cookie Jar and Cinnamoroll Candles. |
![]() |
Make It Mini Dinosaurs Jurassic World Instructions Step-by-step instructions for creating Jurassic World dinosaurs using the Make It Mini Dinosaurs kit. Includes safety warnings, assembly guides for Standard Dinosaur (Egg), Hybrid Dinosaur (Tube), and Mosasaurus, plus display and optimization tips. |