Certificate of Conformity

Certificate Number: N° 250008RECO07-CER

Issuance Details

Issued to / License holder: GoodWe Technologies Co., Ltd.

Address: No. 90 Zijin Rd., New District, Suzhou, 215011, China

Trademark: GOODWE

Factory Location: GoodWe Technologies Co., Ltd., No. 90 Zijin Rd., New District, Suzhou, 215011, China

Product Certification

Product Type: Bi-directional Converter

Models Certified: GW3K-EHA-G20, GW3.6K-EHA-G20, GW5K-EHA-G20, GW6K-EHA-G20, GW8K-EHA-G20, GW9.999K-EHA-G20, GW10K-EHA-G20

Technical Characteristics

Rated Voltage: 230 VAC

Rated Frequency: 50 Hz

Firmware Version: 010101

Number of Phases: Single-phase (L/N/PE)

Isolation Transformer: No

(See page 3 for full list of product references and nominal characteristics)

Compliance with Standards

This product is in compliance with the following standards:

  • Technical Supervision Standard for the conformity of Electricity Generation Modules according to EU Regulation 2016/631. Revision 2.1 of July 9, 2021 (1)
  • Correction of errors of version 2.1 (from 9/7/2021) of the Technical Supervision Standard for the conformity of Electricity Generation Modules according to EU Regulation 2016/631. Revision 1.0 of October 8, 2021.

(1) See page 2 for more details regarding the standard’s requirements that are evaluated and in compliance under the scope of this certificate.

It is certified that Power Generating Units (PGU) indicated in this certificate are in compliance with requirements stipulated in the certified standard for grid connection applications of TYPE A.

The aforementioned equipment is certified according to the SGS internal procedure PE.T-ECPE-65 based on the requirements of the UNE-EN ISO/IEC 17065 standard.

Detailed Compliance Evaluation (Page 2 Summary)

Clause Requirement Type Compliance Evaluation Type Issuing Entity
5.1 Limited Frequency Sensitive Mode - Overfrequency (LFSM-O) ZA YES Test of compliance SGS
5.2 Limited Frequency Sensitive Mode - Underfrequency (LFSM-U) YES Test of compliance SGS
5.3 Frequency Sensitive Mode (FSM) YES Test of compliance SGS
5.5 Remote power control capability and range ≥C YES Test of compliance SGS
5.7 Reactive power capability at maximum capacity and below ≥C YES Test of compliance SGS
5.8 Reactive power control mode ≥C YES Test of compliance SGS
5.8 Voltage control mode >B YES Test of compliance SGS
5.8 Power factor control mode >B YES Test of compliance SGS
5.11 Fault-ride-through capability of PGUs connected below 110 kV B YES Test of compliance SGS
5.11 Fault-ride-through capability of PGUs connected above 110 kV D YES Test of compliance SGS
5.11 Recovery of active power after a fault >B YES Test of compliance SGS
5.11 Fast fault current injection at connection point in case of symmetrical (3-phase) faults >B YES Test of compliance SGS

(*) Evaluated by: P: Test of compliance, S: Simulation of compliance

Product Specifications (Page 3 Summary)

PV Input Characteristics

Model Max. Voltage MPPT Voltage Range
GW3K-EHA-G20 600 V 40-560 V
GW3.6K-EHA-G20 600 V 40-560 V
GW5K-EHA-G20 600 V 40-560 V
GW6K-EHA-G20 600 V 40-560 V
GW8K-EHA-G20 600 V 40-560 V
GW9.999K-EHA-G20 600 V 40-560 V
GW10K-EHA-G20 600 V 40-560 V

AC Output Characteristics

Model Rated Power
GW3K-EHA-G20 3000 W
GW3.6K-EHA-G20 3600 W
GW5K-EHA-G20 5000 W
GW6K-EHA-G20 6000 W
GW8K-EHA-G20 8000 W
GW9.999K-EHA-G20 9999 W
GW10K-EHA-G20 10000 W

Issuance and Validity

This certificate is first issued on 20th August 2025.

Issued in Madrid, 20th August 2025.

Certifier: María J. González Soria

Issuing Body: SGS Tecnos, S.A.U.

Address: C/ Trespaderne, 29 - 28042 Madrid

This certificate is issued by SGS under its General Conditions for Product Certification at www.sgs.com/terms_and_conditions. The status and validity of the certificate can be checked through the provided web link. This document cannot be reproduced partially.

[World Globe Icon] [Stylized Birds Icon]

PDF preview unavailable. Download the PDF instead.

GW ESA-3-10kW Certificate-NTS-Type-A Microsoft Word para Microsoft 365

Related Documents

Preview GoodWe Bidirectional Inverter Certificate of Conformity
Certificate of Conformity for GoodWe GW3K-EHA-G20 to GW10K-EHA-G20 series bidirectional inverters, issued by SGS, confirming compliance with UNE 217002:2020 and IEC 62116:2014 standards.
Preview GoodWe Bi-directional Converter Certificate of Conformity - Models GW3K-EHA-G20 to GW10K-EHA-G20
Official Certificate of Conformity issued by SGS for GoodWe Bi-directional Converters, models GW3K-EHA-G20 through GW10K-EHA-G20, confirming compliance with P.O. 12.2 SENP and UNE-EN ISO/IEC 17065 standards.
Preview GoodWe Bidirectional Converters Certificate of Conformity - UNE 217001
Certificate of Conformity for GoodWe Bidirectional Converters (GW3K-EHA-G20 to GW10K-EHA-G20) issued by SGS, confirming compliance with UNE 217001:2020-10 and ITC-BT-40 standards.
Preview GoodWe Bidirectional Converter Certificate of Conformity - Models GW3K-EHA-G20 to GW10K-EHA-G20
Official Certificate of Conformity from SGS for GoodWe bidirectional solar inverters, models GW3K-EHA-G20 through GW10K-EHA-G20, detailing technical specifications and regulatory compliance.
Preview GoodWe Bidirectional Converters Certificate of Conformity
This document is a Certificate of Conformity issued by SGS for GoodWe Technologies Co., Ltd.'s bidirectional converters, including models GW3K-EHA-G20 through GW10K-EHA-G20. It details technical specifications, compliance standards (UNE 217001:2020-10, ITC-BT-40), and installation information, including the GMK110 energy meter. The certificate is valid until August 19, 2030.
Preview GoodWe ESA Series: 3-10kW Single Phase Home Storage Solution | Datasheet
Comprehensive technical details and features of the GoodWe ESA Series, a fully integrated all-in-one solar and home storage solution with flexible battery options, UPS-level backup, and advanced safety features.
Preview GoodWe ESA Series: 3-10kW/5-48kWh Single Phase Home Storage Solution
Detailed information on the GoodWe ESA Series, a flexible and efficient all-in-one solar and storage solution for residential energy systems, featuring technical specifications and key benefits.
Preview GOODWE Limited Warranty for BAT Series Battery Systems (Australia & New Zealand)
Details the limited warranty terms, conditions, exclusions, and claim procedures for GOODWE BAT Series battery systems (BAT 5.1 & 8.3) in Australia and New Zealand markets. Covers product and performance warranties, manufacturer and importer contact information, preconditions for claims, remedies, and warranty exceptions.