Pelgrim Built-in Oven and Microwave Installation Dimensions and Safety Guide
This document provides essential safety information and installation dimensions for Pelgrim built-in ovens and microwave ovens.
Important Safety Information
[Warning symbol] Important! Read these instructions before use!
This section contains safety regulations for ovens and microwave ovens, presented in multiple languages.
- Dutch: Veiligheidsvoorschriften oven/magnetron
- English: Safety regulations oven/microwave oven
- French: Sécurité four/four à micro-ondes
- German: Sicherheitshinweise Ofen/Mikrowellengerät
[Ground symbol] Ensure proper grounding for electrical safety.
The appliance requires specific ventilation. Ensure a minimum of 250 cm² of ventilation area is maintained.
Installation Dimensions
The following diagrams illustrate the required installation space and dimensions for various Pelgrim built-in oven and microwave models.
Cabinet Integration Diagrams
Diagram 1 shows a typical installation space for a built-in appliance, highlighting dimensions A, B1, C, D, and the crucial 250 cm² ventilation opening at the top.
Diagram 2 depicts a built-in oven unit with detailed dimensions labeled A, B1, C, D, E, F, G, H. This illustrates the external and internal measurements of the appliance itself.
Diagram 3 illustrates a built-in unit, likely a cabinet base, showing dimensions A, B2, C. It emphasizes the ventilation requirement of 250 cm² at the base.
Model-Specific Dimensions Table
The table below lists the specific dimensions (in mm) for various Pelgrim oven and microwave models. Please refer to the corresponding letters (A-H) as indicated in the diagrams.
| Model Series | A | B1 | B2 | C | D | E | F | G | H |
|---|---|---|---|---|---|---|---|---|---|
| OM165___ / OM270___ / OP270___ OVM216___ | 560 | 595 | 600 | 555 | 575 | 555 | 595 | 595 | 20 |
| OM470___ / OM670___ / MO670___ COM316___ / OM265___ / MO470___ / OP670___ / OM360___ / OM460___ / O360___ | 560 | 590 | 600 | 550 | 566 | 546 | 596 | 595 | 20 |
| CM244___ / CM444___ / CM644___ / MAC214___ | 560 | 450 | 460 | 550 | 570 | 550 | 460 | 595 | 20 |
| CM250___ / CM350___ / CM450___ / CM650___ / MAC314___ / OM240___ / OM340___ | 560 | 450 | 460 | 550 | 565 | 545 | 454 | 595 | 20 |
Technical Details and Identification
The appliance is designed for secure installation within cabinetry. Mounting typically involves using provided screws and brackets, as illustrated in the diagrams.
Electrical connections should be made according to local regulations. The required voltage, wattage, and frequency (V/W/Hz) should be verified for the specific installation environment.
Certification marks such as DvE GS indicate compliance with safety standards.
Appliance Identification
Please refer to the appliance's rating plate for specific identification details:
- Model No.: XXXXXXX (Placeholder)
- Type: xxx xx (Placeholder)
- Article No.: (Placeholder)
- Serial No.: xxxxxxx (Placeholder)
- Product Code: XXX-XXXXXX-XXX- XXXX / XXX-XXX- XXXX (Placeholder)
Document Reference: 851950 / VER 3 / 15-02-2024
Barcode Reference: *851950*
