Hama Charger Kit USB-C, USB-A, PD/QC 3.0, 2.0 User Manual
Model: 00210521
About This Product
Thank you for choosing a Hama product. This manual provides instructions and safety information for the Hama Charger Kit, featuring USB-C and USB-A ports with Power Delivery (PD) and Quick Charge (QC) 3.0/2.0 technology.
Package Contents
- Charger (USB-C, USB-A), Power Delivery (PD) / QC 3.0, 2.0
- USB-C – USB-C charging cable
- Operating Instructions
Safety Notes
Please read and follow all safety instructions carefully to ensure safe and proper use of the product.
General Safety
- Protect the product from dirt, moisture, and overheating. Use only in dry rooms.
- Do not drop the product or expose it to major shocks.
- Do not operate the product outside the specified power limits.
- Do not modify the device; this voids the warranty.
- Do not continue to operate if visibly damaged.
- Use the product only for its intended purpose.
- Keep out of reach of children.
- Avoid use near heaters, heat sources, or direct sunlight.
- Lay cables to prevent tripping hazards.
- Do not bend or crush cables.
- Always pull the plug, not the cable, to disconnect.
- Dispose of packaging material according to local regulations.
- Product is for indoor use only.
- Use in moderate climatic conditions.
- Do not use where electronic devices are prohibited.
- Avoid moist environments and splashes.
Risk of Electric Shock
- Do not open or operate a damaged device.
- Do not use if the AC adapter, adapter cable, or power cord is damaged.
- Do not attempt self-service or repairs; contact qualified experts.
Operation
Mains Voltage (100-240 V)
The charger is suitable for worldwide use with mains voltage from 100-240 V. A country-specific adapter may be required.
Connecting Terminal Devices
- Before connecting a device, check if the charger's power output is sufficient.
- Ensure the total power of all connected devices does not exceed 30 W (USB-C 18 W + USB-A 12 W).
- Refer to your terminal device's operating manual for specific instructions.
Power Delivery / QC 3.0, 2.0
Plug & Go: No manual setup is required. Voltage and power are automatically configured by Power Delivery / QC 3.0, 2.0 for efficient and optimized charging. Ensure your terminal device supports PD/QC 3.0, 2.0 for best performance. Compatibility may vary with different device firmware versions.
Connecting to Power Socket
- Connect only to an approved, accessible power socket located near the product.
- Disconnect from mains using the power button or by unplugging the power cord.
- For multi-sockets, ensure total power draw does not exceed the rating.
- Disconnect if the product will not be used for an extended period.
Charging Procedure
If no specific instructions are provided by the device being charged:
- Connect your terminal device to a USB charging port using a suitable USB cable.
- Connect the charger to a properly installed and accessible power socket.
- Charging progress will be displayed on your terminal device.
- Disconnect the terminal device from the charger when interrupting charging or when fully charged.
- Then disconnect the charger from the mains.
- Observe maximum charging times for built-in batteries.
Care and Maintenance
Clean the product with a dry, soft cloth only. Always disconnect the device from the power supply before cleaning or if it will not be used for a long period.
Technical Specifications
Specification | Value |
---|---|
Manufacturer's name or trade mark, commercial registration number and address | Hama, HRA12159, Dresdner Str. 9, 86653 Monheim |
Model identifier | 00210521 |
Input voltage | 100 – 240 V |
Input AC frequency | 50 / 60 Hz |
Output voltage / Output current / Output power | USB-C: 5.0 V DC / 3.0A / 15.0 W 9.0 V DC / 2.0A / 18.0 W 12.0 V DC / 1.5A / 18.0 W USB-A: 5.0 V DC / 2.4A / 12.0 W Total: 30.0 W |
Average active efficiency | 81.6 % |
Efficiency at low load (10 %) | 76.3 % |
No-load power consumption | 0.3 W |
Charger Ambient temperature | 0°C – 40°C |
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability or warranty for damage resulting from improper installation, mounting, or use of the product, or from failure to observe the operating instructions and/or safety notes.
Recycling Information
Note on environmental protection: Electric and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices and batteries at the end of their service lives to designated public collection points or points of sale. This symbol on the product, manual, or packaging indicates compliance. Recycling and reusing materials contributes to environmental protection.