WiZ 12V Ground Spot Starter Kit
Model Numbers: 929003258301, 929003258506, 3241 659 96121
Year: 2022
Maximum Power Output: 24W
Installation Overview
This guide outlines the installation process for the WiZ 12V Ground Spot Starter Kit. The kit allows for the connection of multiple low-voltage LED spot lights to a central transformer, enabling outdoor illumination.
Components
- Transformer: Converts mains power to 12V for the lights.
- Low-Voltage Cable: Distributes power from the transformer to the spot lights.
- Ground Spot Lights: The individual light fixtures designed for ground placement.
Installation Steps
Step 1: Connect Power to Transformer
Connect the power adapter (typically plugged into a mains socket, not shown in detail) to the input port of the WiZ transformer unit.
Step 2: Connect Transformer to Main Cable
Connect the 12V output terminal of the transformer to the main low-voltage cable. This cable serves as the power distribution backbone for the spot lights.
Step 3: Connect First Spot Light
Attach the first ground spot light to the main low-voltage cable. The cable may feature connectors or designated points (potentially indicated by numbers 0-14 along its length) for attaching multiple lights.
Step 4: Connect Second Spot Light
Connect the second ground spot light to the main low-voltage cable, following the same procedure as the first. Ensure secure connections.
Step 5: Connect Third Spot Light
Connect the third ground spot light to the main low-voltage cable.
Step 6: Connect Fourth Spot Light
Connect the fourth ground spot light to the main low-voltage cable.
Step 7: Connect Fifth Spot Light
Connect the fifth ground spot light to the main low-voltage cable.
Step 8: Connect Sixth Spot Light
Connect the sixth ground spot light to the main low-voltage cable. The kit is designed to support up to six spot lights, with the cable providing the necessary connections.
Ensure all connections are weather-resistant and properly secured according to the specific connector types provided with the kit.
