Wiz Smart LED Strip Installation Manual
Brand: Wiz
Manufacturer: Signify
Product Overview
This document provides instructions for installing the Wiz Smart LED Strip. It details the components included, the step-by-step installation process, and important considerations for setup.
Included Components
The Wiz Smart LED Strip package typically includes:
- LED Strip (on a reel)
- Controller
- Power Adapter
- Mounting Screws (5x, ST3.0 x 16mm)
- Mounting Clips (5x, 16mm x 28mm)
Visual representation shows a reel of LED strip, a controller with a button, a power adapter with a plug, and bags of screws and clips.
Installation Steps
Step 1: Preparation
Ensure the surface where the LED strip will be mounted is clean and dry. Sparkles indicate a clean surface.
Diagram shows hands cleaning a surface, with sparkles indicating cleanliness.
Step 2: Apply LED Strip
Peel off the adhesive backing from the LED strip. Carefully align and press the strip onto the prepared surface.
Diagram shows hands peeling the backing off the LED strip and applying it to a surface.
Step 3: Connect Controller
Connect the LED strip to the controller. Ensure the connection is secure, indicated by a "Click" sound.
Diagram shows hands connecting the LED strip connector to the controller connector. An arrow points towards the connection, with "Click" text.
Step 4: Connect Power Adapter
Connect the controller to the power adapter. Then, plug the power adapter into a wall outlet ⚡.
Diagram shows the controller connected to the power adapter, and the power adapter plugged into a wall socket.
Step 5: Final Setup & App Connection
Once powered, the LED strip is ready. Visit wiz.guide/lighting to download the Wiz app and complete setup. A smartphone with the Wiz app and a checkmark ✔️ indicates successful setup.
Diagrams illustrate the final setup, and a smartphone with the Wiz app displaying a checkmark.
Important Notes & Warnings
- Cutting the Strip: The LED strip can be cut at designated points (marked with scissors ✂️).
- Angle: Ensure the strip is not bent at an angle sharper than 90 degrees (≥ 90°).
- Connection: Diagrams show correct ✔️ and incorrect ❌ methods for connecting the strip to the controller. Ensure proper alignment.
- Mounting: Use the provided screws ? and clips for secure mounting.
Diagrams illustrate cutting the strip, a warning about sharp bends, and correct/incorrect connection methods.
Technical Specifications
| Attribute | Value |
|---|---|
| Brand | WiZ |
| Product Family | LED |
| Shape | LED Strip |
| Wattage | 36W |
| Template Ref. | N/A |
| SGS number | 7609379 |
| 12-NC.NBR | 324166160661 |
| Masterdrawing | n/a |
| CRC Ref. | |
| Description | WiZ RGB LED strip 15m Type-C |
| Surface treatment | N/A |
| Barcode No. | 8720169077089 |
| Operator(s) | winter.chen |
| Version No. | v1 |
| Date in | 20/02/2024 |
| Date amended | 20-Feb-24 |
Disclaimer
Please note that the original artwork was not built by SGS. SGS only made changes on specific content as listed below. Therefore, SGS does not hold any responsibility for other content in this file. If you have any questions regarding the artwork, please contact Philips Lighting PCC accordingly.
Author: winter
Date: 2024/02/20
Revision Description: 7609379_v1 Black diecut 20-Feb-24
