Honey-Can-Do 5-Tier Shelving Unit

Parts List

Ensure all parts are present before beginning assembly:

• 5 x Shelves
• 20 x Shelf support clips
• 4 x Leveler feet
• 4 x Top uprights
• 4 x Bottom uprights
• 4 x Connectors

Assembly Instructions

Follow these steps to assemble your shelving unit:

1. Step 1: Attach Leveler Feet and Bottom Uprights

   Screw the leveler feet (C) into the bottom of the bottom uprights. Insert the bottom uprights into the connectors (F) to create the base posts. Attach the lowest shelf (A) by sliding it onto the bottom uprights, ensuring it is level. Use the shelf support clips (B) to secure the shelf in place. Note the orientation of the shelf support clips; the side with the arrow should point upwards.

2. Step 2: Add Middle Shelves

   Determine the desired height for your next shelf. Insert shelf support clips (B) into the corresponding slots on the uprights. Place a shelf (A) onto the clips. Repeat for remaining shelves, ensuring each shelf is securely attached with clips.

3. Step 3: Attach Top Uprights

   If your unit requires top uprights, insert them into the connectors at the top of the bottom uprights. Ensure they are fully seated.

4. Step 4: Add Remaining Shelves

   Continue adding shelves by inserting shelf support clips (B) at the desired heights and placing shelves (A) onto the clips. Ensure all shelves are level and secured.

5. Step 5: Final Shelf Placement

   Place the final shelf (A) on the top set of shelf support clips (B).

Important Notes:

• Ensure all shelves are level before placing items on them.
• The NSF certification indicates that this product meets public health and safety standards.