Honey-Can-Do Writing Desk with Wire Basket
Model: OFC-09308
Dimensions: 39.4 in L x 17.7 in W x 29.5 in H
Parts List
| Part/Illustration | QTY | Description |
|---|---|---|
| A | (1) | Desktop |
| B | (2) | Desktop frames |
| C | (1) | Basket. Attaches to the underside of the desk. |
| D | (1) | Back support |
| E | (2) | Vertical desktop supports |
| F | (2) | Desktop frame supports |
| G | (4) | Socket cap, hex socket screws (M6 x 1 x 35mm) |
| H | (8) | Pan head, hex socket screws (M6 x 1 x 12mm) |
| I | (1) | Hex wrench for pan head screws |
| J | (1) | Hex wrench for socket cap screws |
Assembly Instructions
Step 1: Prepare Components
Identify all parts and hardware listed above.
Step 2: Assemble Frame Base
Attach the two desktop frames (B) to the two vertical desktop supports (E) using four socket cap, hex socket screws (G). Do not tighten screws fully yet. [down arrow] [down arrow]
Step 3: Add Frame Supports
Attach the two desktop frame supports (F) to the vertical desktop supports (E) using four socket cap, hex socket screws (G). Use the hex wrench for socket cap screws (J) to tighten. [circular arrow]
Step 4: Attach Back Support
Connect the back support (D) to the assembled frame. Secure it using four pan head, hex socket screws (H) and the hex wrench for pan head (I). [circular arrow]
Step 5: Attach Desktop
Place the desktop (A) onto the assembled frame. Align the holes. Secure the desktop using four pan head, hex socket screws (H) and the hex wrench for pan head (I). Tighten all screws fully for stability. [circular arrow]
Step 6: Install Wire Basket
Attach the wire basket (C) to the underside of the desktop. The basket is designed to hook onto the frame. [arrow pointing into place]
