Philips Electric Kettle HD9396 User Manual

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Important Information

Read this important information carefully before you use the appliance and save it for future reference.

Warnings

• Avoid spillage on the connector.
• Do not misuse this kettle for other than its intended use to avoid potential injury.
• Do not use the appliance if the plug, the mains cord, the base or the kettle itself is damaged. If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
• This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years.
• Children shall not play with the appliance.
• Keep the mains cord, the base and the kettle away from hot surfaces.
• Do not place the appliance on an enclosed surface (e.g. a serving tray), as this could cause water to accumulate under the appliance, resulting in a hazardous situation.
• Unplug the appliance and let it cool down before you clean it. Do not immerse the kettle or base in water or any other liquid. Only clean the appliance with a moist cloth and a mild cleaning agent.
• The kettle shall not be used for cooking noodles because the oil can make the water level indicator crack.

Caution

• Do not let the moist cloth come into contact with the cord, the plug and the connector of the base.
• Only connect the appliance to an earthed wall socket.
• Only use the kettle in combination with its original base.
• The kettle is only intended for heating up and boiling water.
• Never fill the kettle beyond the maximum level indication. If the kettle has been overfilled, boiling water may be ejected from the spout and cause scalding.
• Be careful: the outside of the kettle and the water in it become hot during and some time after use. Only lift the kettle by its handle. Also beware of the hot steam that comes out of the kettle.
• This appliance is intended to be used in household and similar applications such as farm houses, bed and breakfast type environments, staff kitchen areas in shops, in offices and in other working environments and by clients in hotels, motels and other residential type environments.

Boil-dry Protection

This kettle is equipped with boil-dry protection: it switches off automatically if you accidentally switch it on with no or not enough water in it. Let the kettle cool down for 10 minutes and then lift the kettle off its base. Then the kettle is ready for use again.

Electromagnetic Fields (EMF)

This appliance complies with the applicable standards and regulations regarding exposure to electromagnetic fields.

Recycling

This symbol [♲] means that electrical products shall not be disposed of with normal household waste. Follow your country’s rules for the separate collection of electrical products.

Warranty and Support

Versuni offers a two-year warranty after purchase on this product. This warranty is not valid if a defect is due to incorrect use or poor maintenance. Our warranty does not affect your rights under law as a consumer. For more information or for invoking the warranty, please visit our website www.philips.com/support.

Descaling

Descale the appliance when you notice excessive steaming or when the brewing time increases. It is advisable to descale every two months. Only use white vinegar to descale, as other products may cause damage to the appliance.

Operating Instructions (Diagram Descriptions)

The kettle is designed for heating and boiling water. Follow these steps for operation:

• Step 1: Place the kettle on the power base.
• Step 2: Fill the kettle with water up to the MAX level indicator.
• Step 3: Connect the power plug to an earthed wall socket.
• Step 4: Press the power switch to boil water. The indicator light will turn on.
• Step 5: The kettle will switch off automatically when the water boils.
• Step 6: Pour the hot water carefully.
• Step 7: Unplug the appliance after use.

Cleaning: Unplug the appliance and let it cool down. Clean the exterior with a damp cloth and mild detergent. Do not immerse the kettle or base in water.

Descaling: When excessive steam is noticed or brewing time increases, descale the kettle every two months using white vinegar.