Anko Tablet and Smartphone Floor Stand

Before First Use

1. Unpack the device and check if all parts are there and undamaged. Should this not be the case, return the product to Kmart for replacement.
2. ⚠️ Danger of suffocation! Keep all packaging materials away from children.
3. Remove all protective foils and packaging material prior to use.

Safety Instructions

Please read the instruction manual before using this device and follow all the safety instructions to avoid damage caused by improper use.

• ▶️ Keep the instruction manual for future reference. Should this device be given to a third party, then this instruction manual must also be handed over.
• ▶️ Keep the device away from all hot surfaces and naked flames.
• ▶️ Do not immerse the device in water or in other liquids.
• ▶️ Do not use the device in wet conditions.
• ▶️ Do not use the tripod in windy conditions or on an uneven surface.
• ▶️ Do not use the device if it is damaged.
• ▶️ This device is not a toy. Children should be supervised to ensure they do not play with the device.

Parts

The following parts are included:

• Part 1: Smartphone Holder
• Part 2: Telescopic Rod
• Part 3: Tripod Base

1. Unscrew the nut to unfold the tripod to place it on a flat surface, then tighten the screw again. [Visual: Tripod legs being unfolded and secured.]
2. Install the telescopic rod to the desired length and tighten the screw. [Visual: Telescopic rod being attached to the tripod base.]
3. Same as Step 2. [Visual: Showing the telescopic rod attached.]
4. Same as Step 2. [Visual: Showing the telescopic rod attached from a different angle.]
5. Unscrew the screw nut behind the holder. [Visual: Unscrewing a nut on the smartphone holder mechanism.]
6. Put the nut into the ball joint, aligning the rotation ball axis into the hole. [Visual: Inserting a nut into a ball joint socket.]
7. Push the axis into the nut and secure the nut. [Visual: Securing the ball joint mechanism.]
8. Assembly completed. Mount the device on the floor stand, ready to use. [Visual: The fully assembled stand with a tablet or smartphone attached.]
9. The additional smartphone mount assembly method is the same as the tablet mount. [Visual: Indicating the similarity in mounting for different devices.]