Jelly Comb MT50 User Manual

Product Features

The Jelly Comb MT50 is a versatile wireless mouse offering 2.4G USB and dual Bluetooth connectivity options. It is rechargeable and features a trackball for precise control.

Mouse Components:

• Left click button
• Right click button
• Forward button
• Backward button
• Trackball
• USB indicator light
• Bluetooth 1 indicator light + Bluetooth 2 indicator light
• Scroll wheel
• DPI button
• Charging indicator
• Mode switch button
• TYPE-C Charging port
• Power switch

2.4G USB Connection

1. Turn the power switch to ON.
2. Take out the USB receiver.
3. Press the mode switch button until the white light is on and enters USB mode.
4. Insert the USB receiver into your computer's USB port.

Bluetooth Connection

General Steps:

1. Turn the power switch to ON.
2. Press the mode switch button and switch to Bluetooth mode (indicated by a slowly flashing white light).
3. Press and hold the mode switch button for 3-5 seconds until the white light flashes quickly, indicating the mouse has entered Bluetooth pairing mode.

Windows 10 System Pairing:

1. Click "Bluetooth device" in system settings.
2. Click "Add or remove a Bluetooth device".
3. Your computer will automatically search for "BT 4.0+2.4G mouse". Click "Pair".
4. "BT 4.0+2.4G mouse" is now connected and ready for use.

Mac OS System Pairing:

1. Click "System Preferences" on your Mac.
2. Click "Bluetooth" in "System Preferences".
3. Your computer will automatically find "BT 4.0+2.4G mouse". Click "Pair" and complete the installation.

iOS System Pairing:

1. Go to Settings on your device and turn on Bluetooth.
2. Go to Settings > Accessibility > Touch.
3. Turn on AssistiveTouch.
4. Your device will automatically find "BT 4.0+2.4G mouse". Click "Pair" and complete the pairing. (Note: Only systems above iOS 13 support mouse functionality).

Android System Pairing:

1. Go to Settings on your device and turn on Bluetooth.
2. Your device will automatically find "BT 4.0+2.4G mouse". Click "Pair" and complete the pairing.

Charging Function Guide

When the battery is low, the charging indicator and the corresponding channel indicator will flash until the device turns off. Connect the mouse to a power source using the provided USB-C cable. The charging indicator will remain on while charging and turn off when charging is complete. Charging typically takes 1-3.5 hours.

How to Switch Connection Mode

Once connected to Bluetooth 1, Bluetooth 2, and/or 2.4G USB modes, press the mode switch button on the top of the mouse to seamlessly switch between connected devices.

Data Parameters

Basic Parameters:

• Chip: Nordic NRF51802W
• Engine: Optical
• Lithium battery capacity: 600mA
• Mouse DPI: 1000-1600-2400
• Click life: 3 million+
• Dimensions: 133.6mm x 96.6mm x 47.5mm
• Weight: 135g

2.4G Transmission Parameters:

• Transmission distance: 20m
• Working Voltage: 3.7V
• Working current: 5.5mA
• Reaction rate: 250Hz

Bluetooth Transmission Parameters:

• Transmission distance: 10m
• Working Voltage: 3.7V
• Working current: 4mA
• Reaction rate: 125Hz

System Requirements:

• For 2.4G USB Connection: An available USB port, Windows XP or later, Mac OS X 10.10 or later.
• For Bluetooth Connection: Bluetooth-enabled device, Windows 8 or later, Mac OS X 10.10 or later, Android 4.3 or later.

Package Content

• 1 x Wireless Mouse
• 1 x USB Receiver
• 1 x USB C Charging Cable
• 1 x User Manual