Signature Design by Ashley A4000035, A4000036 Assembly Instructions
Model Numbers: A4000035, A4000036
Important Safety Notice
Read carefully before beginning assembly.
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep the instructions for future reference.
- Some assembly may involve attaching glass or mirrors. Be very careful handling the glass or mirrors, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
- When assembling products that have electric cords (lamps, light, etc.), always (1) make sure the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
- When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upper shelves – use a step ladder.
- Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not to support the weight of a person.
- Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
NOTE: ASHLEY FURNITURE INDUSTRIES, LLC DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.
NOTE: YOUR UNIT MAY LOOK DIFFERENT IN APPEARANCE FROM THE ONE SHOWN IN THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.
Parts List
Please identify all parts before beginning assembly. Note that the appearance of your unit may differ from the illustrations.
- Part A: x 2 (Side frames/legs)
- Part B: x 1 (Base/bottom support)
- Part C: x 1 (Top panel/seat)
- Part D: x 1 (Vertical support)
- Part E: x 1 (Vertical support)
- Part F: x 12 (Screws, #4 x 12mm)
- Part G: x 8 (Screws, 1/4" x 35mm)
- Part H: x 2 (Hinges)
- Part J: x 1 (Pin, 4mm)
Hardware Note: Some hardware may not be included (e.g., Part G).
Contact Information for Replacement Parts:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Phone: 1-844-966-0809
Assembly Steps
Important Assembly Notes: The unit should be assembled by two or more people. Do not tighten any bolts until all bolts have been started.
Step 1: Assemble the Base Frame
Attach the two Part A (side frames/legs) to the Part B (base/bottom support). Secure Part D (vertical support) and Part E (vertical support) to the Part A components using eight (8) Part G screws (1/4" x 35mm). Ensure all bolts are started before tightening.
Step 2: Insert the Top Panel
Carefully insert Part C (top panel/seat) into the assembled frame. An arrow in the diagram indicates a downward insertion motion.
Step 3: Attach the Top Panel
Secure Part C (top panel/seat) to the vertical supports (Parts D and E) using two (2) Part G screws (1/4" x 35mm). Ensure all bolts are started before tightening.
Step 4: Attach Hinges
Attach the two (2) Part H (hinges) to the underside of Part C (top panel/seat) and the back of the assembled frame. Use twelve (12) Part F screws (#4 x 12mm) for this step. Ensure proper alignment before tightening.
Step 5: Final Check
The assembly is now complete. Periodically check that all connectors remain tight.
