LTECH M Series LED Controller

Product Overview

The LTECH M Series LED controller is a versatile device compatible with 8 different types of RF remotes. This technology allows for single color, CT dimming, RGB, and RGBW adjustments to meet various lighting requirements. Users can easily control speed, brightness, customize colors, and select lighting changing modes using the RF remote.

Certifications: CE, FC, RoHS

Warranty: 5 years

Quality Standards: ISO9001:2008

System Diagram

Illustrates the connection of the M Series LED controller within a smart home ecosystem, connecting to a router for cloud services and global remote control via Wi-Fi. It also shows the setup for a 'Smart Remote' with a gateway version.

Product Size

Provides dimensions for the Remote and Receiver components.

• Remote: 175mm x 44mm
• Receiver: 60mm x 30mm
• Remote-holder: 63mm x 14mm

Parameters

Operating Instructions

4. Learning ID Method of Remote Control

The remote control is pre-matched to the receiver from the factory. If accidentally deleted, follow these steps to learn the ID:

1. Short press the ID learning button on the M4-5A receiver. The running light will turn on.
2. Press any key on the M4/M8 remote control. The running light will flash several times, indicating successful activation.

Cancel ID: Long press the ID learning button on the M4-5A receiver for 5 seconds.

Note: One receiver can be matched with a maximum of 10 same or different kinds of remotes.

5. Operating Instruction for Receiver

Components:

• Running Light
• ID Learning Button
• 12~24Vdc Power Input Socket
• DC+ DC-
• LED Lamps Connection Socket

6. Operating Instruction for Remote Control

The M4 and M8 remotes offer various controls for LED lighting:

• Color Control: Touch color circle for direct color selection.
• Brightness Control: Use '+' and '-' buttons for brightness adjustment.
• Speed Control: Use '+' and '-' buttons for speed adjustment.
• Mode Selection: Buttons for various dynamic modes (e.g., JUMP3, FADE3, FLASH, JUMP7, FADE7, FLASH7).
• Shortcut Keys: On/Off, Mode loop play.
• White Light: Dedicated key for white light adjustment.
• Color Switch/Dimming: Keys for switching colors and dimming.
• Color Save: Long press (2s) to save current color, short press to display saved colors.
• Switch/Play Keys: For switching modes or playing saved colors (1-7).

M4 Changing Mode Table:

Wiring Diagrams

Provides examples for connecting LED strips to the M4-5A receiver with different voltage power supplies.

E.g. 1: Connected 12V lamp, loads 0~240W (5A x 4CH x 12V)

Shows a connection from a 220/110Vac power supply to the M4-5A receiver, and then to multiple RGBW LED strips.

E.g. 2: Connected 24V lamp, loads 0~480W (5A x 4CH x 24V)

Shows a similar connection setup but with a 24V power supply for higher wattage LED strips.