LTECH P1-P5 RF Wireless LED Controllers
User Manual and Technical Guide
Product Overview
The LTECH P1, P2, P3, P4, and P5 series are RF Wireless LED Controllers designed for various lighting applications. These controllers feature a compact design with a housing made from V0 flame retardant PC materials from SAMSUNG/COVESTRO. They offer a soft-on and fade-in dimming function for enhanced visual comfort and utilize a 2.4GHz wireless signal, eliminating the need for signal wiring.
Key features include:
- Small size and light weight.
- Soft-on and fade-in dimming function.
- 2.4GHz wireless signal for easy setup.
- 1-5 channel constant voltage output.
- Control for DIM, CT, RGB, RGBW, and RGBCW LED lighting.
- Compatibility with LTECH MINI series RF 2.4GHz remotes.
- Models P3, P4, and P5 include 9 built-in dynamic modes.
- A single controller can be paired with up to 10 remotes.
- Supports synchronized dynamic effects between controllers in the same group/zone.
Technical Specifications
| Model | P1 | P2 | P3 | P4 | P5 |
|---|---|---|---|---|---|
| Input Signal | RF 2.4GHz | RF 2.4GHz | RF 2.4GHz | RF 2.4GHz | RF 2.4GHz |
| Input Voltage | 12-48V | 12-48V | 12-48V | 12-48V | 12-48V |
| Output Voltage | 12-48V | 12-48V | 12-48V | 12-48V | 12-48V |
| Channels | 1 CH | 2 CH | 3 CH | 4 CH | 5 CH |
| Reset Switch | Yes | Yes | Yes | No | No |
| Load Current | Max. 11A | Max. 12A | Max. 15A | Max. 15A | Max. 15A |
| Load Power | 132W@12V 240W@24V 288W@36V 384W@48V |
144W@12V 240W@24V 288W@36V 384W@48V |
180W@12V 360W@24V 432W@36V 432W@48V |
180W@12V 288W@24V 360W@36V 480W@48V |
180W@12V 360W@24V 450W@36V 600W@48V |
| Compatible Remote Control Models | Single-zone: M1A/M1B Multi-zone: M1C/M1D Programmable: M9 |
Single-zone: M1A/M1B/M2A/M2B Multi-zone: M1C/M1D/M2C/M2D Programmable: M9 |
Single-zone: M1A/M1B/M2A/M2B/ M4A/M4B Multi-zone: M1C/M1D/M2C/M2D/ M4C/M4D Programmable: M9 |
Single-zone: M1A/M1B/M2A/M2B/ M4A/M4B Multi-zone: M1C/M1D/M2C/M2D/ M4C/M4D Programmable: M9 |
Single-zone: M1A/M1B/M2A/M2B/ M4A/M4B/M5A/M5B Multi-zone: M1C/M1D/M2C/M2D/ M4C/M4D/M5C/M5D Programmable: M9 |
| Protection | Short circuit protection, over-temperature protection, over-current protection, and reverse connection prevention protection | ||||
| Working Temp. | -25°C ~ 50°C | ||||
| Dimension | L91×W37×H21(mm) | L91×W37×H21(mm) | L91×W37×H21(mm) | L91×W37×H21(mm) | L91×W37×H21(mm) |
| Package Size | L94×W39×H22(mm) | L94×W39×H22(mm) | L94×W39×H22(mm) | L94×W39×H22(mm) | L94×W39×H22(mm) |
| Weight(G.W.) | 46g | 46g | 46g | 46g | 46g |
Terminal Descriptions
Each controller model features specific input and output terminals:
P1 Controller
Input: 12-48Vdc power input. Features a running indicator light and an ID learning button.
Output: Terminal block for LED output.
P2 Controller
Input: 12-48Vdc power input. Features a running indicator light and an ID learning button.
Output: Terminal block for LED output. Supports DIM, CCT (Warm White/Cool White) outputs.
P3 Controller
Input: 12-48Vdc power input. Features a running indicator light and an ID learning button.
Output: Terminal block for LED output. Supports DIM, CCT (Warm White/Cool White), and RGB outputs.
P4 Controller
Input: 12-48Vdc power input. Features a running indicator light and an ID learning button.
Output: Terminal block for LED output. Supports DIM, CCT (Warm White/Cool White), RGB, and RGBW outputs.
P5 Controller
Input: 12-48Vdc power input. Features a running indicator light and an ID learning button.
Output: Terminal block for LED output. Supports DIM, CCT (Warm White/Cool White), RGB, RGBW, and RGBCW outputs.
Wiring Diagrams and Connections
The following describes typical wiring configurations for each controller model with different LED strip types.
P1 Controller Wiring
P2 Controller Wiring
P3 Controller Wiring
P4 Controller Wiring
P5 Controller Wiring
Remote Pairing and Unpairing
These controllers can be paired with LTECH MINI series RF 2.4GHz remotes.
Pairing the Remote
Method 1: Using the Controller Button
- Short press the ID learning button on the controller; the indicator light will flash. Complete the following steps within 10 seconds.
- For Single-zone MINI remotes, long press the ON/OFF button until the controller's indicator light flashes rapidly.
- For Multi-zone MINI remotes, long press the designated zone button until the controller's indicator light flashes rapidly.
- Successful pairing is indicated when the controller's load light flashes slowly and then remains constantly lit.
Method 2: Powering On the Controller
- Turn off the controller.
- For Single-zone MINI remotes, long press the ON/OFF button and power on the controller simultaneously until the indicator light flashes rapidly.
- For Multi-zone MINI remotes, long press the designated zone button and power on the controller simultaneously until the indicator light flashes rapidly.
- Successful pairing is indicated when the controller's load light flashes slowly and then remains constantly lit.
Note: A controller can be paired with a maximum of 10 remotes. Pairing more than 10 remotes will automatically delete the earliest paired remote ID codes.
Unpairing the Remote
Method 1: Using the Controller Button
- Delete all remote pairings: Long press the ID learning button on the controller for 10 seconds, then short press it 6 times. The indicator light will flash and then stay on, confirming removal.
- Delete a single remote pairing:
- Single-zone Mini: Press and hold the ID learning key for 5 seconds. Within 10 seconds, press the ON/OFF key three times briefly. The load light will flash slowly and stay on constantly upon successful clearing.
- Multi-zone Mini: Press and hold the ID learning key for 5 seconds. Within 10 seconds, press the zone key three times briefly. The load light will flash slowly and stay on constantly upon successful clearing.
Method 2: Powering On the Controller
- Delete a single remote pairing:
- Single-zone Mini: Power on the controller for 2 seconds, power it off for 2 seconds, then power it on again. Within 3 seconds, press the ON/OFF key three times briefly. The load light will flash slowly and stay on constantly upon successful clearing.
- Multi-zone Mini: Power on the controller for 2 seconds, power it off for 2 seconds, then power it on again. Within 3 seconds, press the zone key three times briefly. The load light will flash slowly and stay on constantly upon successful clearing.
Installation Precautions and Attentions
Proper installation is crucial for the performance and longevity of the LED controllers.
Precautions:
- Spacing: Ensure a minimum distance of 15cm between stacked products to allow for heat dissipation and maintain lifespan.
- Placement: Do not place products directly on the floor. Maintain a distance of at least 100cm from the floor to avoid signal interference.
- Metal Objects: Avoid placing products near large metal objects (e.g., metal stud ceilings) or beams/corners. Maintain a minimum distance of 15cm from such objects to prevent signal interference.
- Environment: Install products within their specified working temperature range. Avoid installing inside LED fixtures where temperatures may exceed the limits, which could affect product lifetime.
Attentions:
- Installation and commissioning should be performed by a qualified professional.
- LTECH products are not inherently lightningproof or waterproof (unless specified for special models). Protect them from sun and rain, especially when installed outdoors, using waterproof enclosures or lightning protection devices.
- Ensure good ventilation for effective heat dissipation, which extends product life.
- Avoid placing controllers near large metallic objects or stacking them to prevent signal interference.
- Avoid installation in areas prone to thunderstorms, strong magnetic fields, or high voltage.
- Verify that the working voltage used complies with the product's parameter requirements.
- Before powering on, double-check all wiring to prevent short circuits, damage to components, or accidents due to incorrect connections.
- If a fault occurs, do not attempt to repair the product yourself. Contact the supplier for assistance.
Note: This manual is subject to change without prior notice. Product functions are subject to the actual goods. Please contact official LTECH distributors for any questions.
Warranty Agreement
Warranty Period: 5 years from the date of delivery.
Free repair or replacement services are provided for quality-related issues within the warranty period.
Warranty Exclusions:
- Issues arising beyond the warranty period.
- Artificial damage caused by high voltage, overload, or improper operations.
- Products with severe physical damage.
- Damage caused by natural disasters or force majeure.
- Damaged warranty labels or barcodes.
- Cases not covered by a signed contract with LTECH.
Liability Limitation: Repair or replacement is the sole remedy. LTECH is not liable for incidental or consequential damages unless mandated by law.
Amendments: LTECH reserves the right to amend warranty terms, with written releases prevailing.
Manufacturer: ZHUHAI LTECH TECHNOLOGY CO., LTD.
Address: No. 183, Shui'an 1st Road, Xiangzhou District, 519060 Zhuhai City, PEOPLE'S REPUBLIC OF CHINA
Website: www.ltech-led.com
LED Controller | LED Dimmable Driver | LED Intelligent Lighting | Intelligent Home -LTECH
