Product Overview
This document provides instructions for the Spanninga VENA EBIKE light system.
Electrical Connections and Mounting
The VENA EBIKE light system requires proper electrical connection and mounting to the bicycle. The system is designed to be compatible with various power sources.
Diagram 1: Electrical Input and Mounting Hardware
Illustration shows a bicycle rear wheel and a battery pack. Connection point '1' is indicated near the rear wheel hub. Connection point '2' is indicated near the bicycle's rear rack or seat post area. The system supports the following electrical inputs:
- AC
- 6V DC
- 12V DC
- 36V DC
- 48V DC
The mounting hardware specified is M5 / 12mm. Electrical connections are marked with positive (+) and negative (-) terminals.
Diagram 2: Light Attachment
Illustration shows the rear wheel of a bicycle with a red light securely attached.
Diagram 3: Connection Detail
A close-up view of the light fixture is shown, with a dotted line indicating the path for electrical connection.
Specifications
Supported voltage inputs:
- AC
- 6V DC
- 12V DC
- 36V DC
- 48V DC
Mounting hardware: M5 / 12mm
