Kendo E-Bike Light Installation and Operation Manual

Product Information

This document provides essential information for the Kendo E-Bike light system, a product from Spanninga, a company with a history dating back to 1918.

Brand: Spanninga

Product Name: Kendo E-Bike Light (also referred to as Kendo XE in some documentation)

Model Identifier: CC01

Installation and Connection

Front Light Mounting (Step 1)

The first step involves mounting the front light assembly. The illustration shows the light unit being attached to the bicycle's front fork using a screw, indicated by the number '1' and an arrow showing the direction of installation.

Beam Alignment Guidance: A side-view diagram illustrates the projected light beam. The '100%' marker likely signifies an optimal setting for beam height or coverage, with dotted lines indicating the beam's path and spread.

Top View: A diagram from a top-down perspective shows the bicycle's handlebars and the front fork area, highlighting the specific location for mounting the front light.

Rear Light Connection (Step 2)

The second step details the connection of the rear light unit (CC01). The illustration shows the light being connected to the bicycle's power supply, with the connection point marked by the number '2'.

The connection requires attention to polarity, indicated by '+' (positive) and '-' (negative) symbols. A dashed line visually represents the wiring route from the rear wheel area to the light unit.

Power Specifications: The Kendo E-Bike light is designed to operate with a power input of 6-36 Volts DC (Direct Current) or AC (Alternating Current).