Onn. Tilting TV Wall Mount 19"-50" Quick Start Guide
Model: OPT01
Date: May 15, 2019
Product Overview
This guide provides instructions for installing the Onn. Tilting TV Wall Mount, compatible with TVs ranging from 19 to 50 inches and weighing up to 88 lbs. It details the necessary hardware, tools, and step-by-step assembly process for various wall types.
Compatibility Information
- TV Size: 19" - 50"
- Maximum Weight: 88 lbs
- VESA Patterns Supported: 50x50mm, 75x75mm, 100x100mm, 100x200mm, 150x150mm, 200x100mm, 200x200mm, 200x300mm, 200x400mm, 300x200mm, 300x300mm, 300x400mm, 400x200mm, 400x300mm, 400x400mm
- Wall Types: Suitable for concrete, stone, or masonry walls using provided anchors. Not recommended for outdoor use.
What's Included in the Box
- A. Wall plate (x1)
- B. Left TV bracket (x1)
- C. Right TV bracket (x1)
- D. Hanging template (x1)
- E. M7x55mm Lag bolt (x4)
- F. Concrete anchor (x4)
- G. Allen wrench (x1)
- H1. M4x12mm screw (x4)
- H2. M6x12mm screw (x4)
- H3. M8x20mm screw (x4)
- H4. M4x35mm screw (x4)
- H5. M6x35mm screw (x4)
- H6. M8x35mm screw (x4)
- I1. M8x15mm spacer (x8)
- I2. M8x5mm spacer (x8)
- J1. M4 washer (x4)
- J2. M6/M8 washer (x4)
- K. Product Guide (x1)
Tools Required (Not Included)
- Phillips Screwdriver
- Drill
- Drill Bits: 5/32" (4.0mm) for wood studs, 3/8" (10mm) for masonry
- Tape Measure
- Level
- Pencil
- Socket Set (1/2" or 13mm)
- Stud Finder (for wood stud installation)
- Hammer (for concrete anchors)
Installation Steps
Step 1: Attach TV Brackets to TV
Select the appropriate screws (H1-H6) that fit your TV's mounting holes. Use spacers (I1, I2) and washers (J1, J2) as needed. Some hardware may be leftover; discard unused parts after installation.
Description of diagram: Shows TV brackets (B, C) being attached to the back of a TV using various screws and washers.
Step 2: Attach Wall Plate to Wall
Use the hanging template (D) to mark hole positions on the wall. Pre-drill the holes. For wood stud mounting, use Lag bolts (E). For concrete, stone, or masonry walls, use Lag bolts (E) with Concrete anchors (F).
Description of diagram: Illustrates attaching the wall plate (A) to a wall, showing options for wood stud installation with Lag bolts (E) and concrete installation with anchors (F). A level is used for alignment.
Step 3: Hang TV on Wall Plate
This step requires at least two people. Carefully hang the TV onto the wall plate (A). Ensure the quick-release cords are pulled down and released until they click into place, securing the TV. Adjust the tilt angle using the TV bracket handles and tighten them afterwards.
Description of diagram: Depicts two people hanging a TV onto the mounted wall plate. It also shows how to adjust the tilt angle using the bracket handles.
Important Safety Information
- Caution: Do not use with TVs exceeding 88 lbs to prevent injury or instability.
- Ensure installation is on a suitable wall type.
- Keep the product guide for future reference.
Customer Support
For assistance, contact Onn. customer support daily from 7 a.m. - 9 p.m. CST at 1-888-516-2630.
Warranty Information
This product comes with a one-year limited warranty covering defects in material or workmanship for purchases made in the U.S.A. and Canada. Keep your original proof of purchase.
Feedback
Share your feedback via the Walmart app by scanning the QR code on the product packaging.
